The New Cases Gallery

My shiny new Lian Li PC-7FN Case and new PC :D

imag0179j.jpg


imag0180z.jpg


imag0177k.jpg


imag0178o.jpg


Tried my best with the cables however the final spec of the new build is as follows:

Intel Core i7 930 @ 3.6Ghz
Asus P6X58D-E Intel X58 Mobo
Corsair XMS3 6GB DDR3 1600MHz Tri-Channel
Powercolor ATI Radeon HD 5870 PCS+
Zalman CNPS10X-Quiet CPU Cooler
Corsair TX 650W PSU
Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive
Samsung SpinPoint F3 1TB SATA-II 32MB Cache
Samsung SH-B083L/RSBP 8x BluRay ROM

Really Happy with it and I have to say the Case has a very classy and understated look about it :)
 
I finito !

img0270os.jpg


img0269sq.jpg


img0272r.jpg


img0271me.jpg


not half bad for a first timer .. I think I deserve a beer now .. thanks guys
 
Last edited:
Gorgeous build OCD-OC. Love everything about it, pretty much the colour scheme and look I would go for with the watercooling and braiding.

Just one thing though, red RAM! Would be nice if you could get those blue or black :)
 
added build log to Sig ..

I have hated the RAM colour from day one .. but £100 to anodise the heatsinks is too much, will possibly just paint them white
 
Wow, looks flipping great OCD-OC :cool:, I like the mix of tubing too :), but damn that kickass ram being the wrong colour, really stands out, I feel the same way about my 5870, red does not fit in with my build.
 
OCD-OC said:
added build log to Sig ..

I have hated the RAM colour from day one .. but £100 to anodise the heatsinks is too much, will possibly just paint them white
Click to expand...

I assume the heatsinks unscrew from the top of those modules ? (i think the corsair dominators supported this) maybe could get them to supply you some blue ones from the other range for less than the 100 to anodise them.... or just paint over them as you said, problem with painting is it will like to keep the heat in a little
 
Gunslinger said:
I assume the heatsinks unscrew from the top of those modules ? (i think the corsair dominators supported this) maybe could get them to supply you some blue ones from the other range for less than the 100 to anodise them.... or just paint over them as you said, problem with painting is it will like to keep the heat in a little
Click to expand...

they sell extended fins in RED and BLACK not bloomin Blue.

my only other alternative would be is if some kind soul on here accidentally blew up a couple of their dominators in blue and wanted to sell me the heatsinks

wonder if RJK or someone at OcUK has some kit lying around ?
 
OCD-OC said:
they sell extended fins in RED and BLACK not bloomin Blue.

my only other alternative would be is if some kind soul on here accidentally blew up a couple of their dominators in blue and wanted to sell me the heatsinks

wonder if RJK or someone at OcUK has some kit lying around ?
Click to expand...

RMA'd modules would be your best bet ... hmmmm, i'd be tempted to go over to the corsair support place, and speak to the RAMguy, and see if maybe he'd put you in touch with someone in their RMA department, you might be able to blag a set from some kind soul there for the cost of the postage and a lot of begging/grovelling ! ... i'd make sure you post a picture of your setup so he gets to see the problem :D (point the flash directly at the red sections for added effect!)

EDIT:
forgot to ask btw, that drain line you have ... when filling the system, i take it that you have to drain off a small amount of fluid through there to shift any trapped water ?
Love those 45 degree compression fittings, i'm leaning towards the compression fittings myself, they might cost more but i think they are worth it
 
Last edited:
My first real attempt at making a tidy build. Shame my PSU isn't fully modular, have quite a few cables tucked in underneath.

Also seems to be a lack of GS-1000's on here so I'm representing :D



 
You must log in or register to reply here.
Back
Top Bottom