***The Vapers Lounge*** 2.0

Status
Not open for further replies.
Right I took the plunge and purchased a Ehpro Kayfun 4 clone and while I'm loving the vaping experience while it's working I'm less than enamored about it's performance when it comes to filling.

Every time I come to fill the device I ensure that the juice control is totally closed and then open the top to fill it up and every single time I replace the cap the juice proceeds to flow straight out of the air holes, every time without fail. After this has happened I remove and clean out the base re-assemble the tank and with the remaining juice it vapes fine.

Anyone else experienced this problem?
 
slinxy said:
You can get pre-made coils from fleabay/fast tech.. I do find using lower gage wire easier as this thicker and hold shape more and lower gage means lower ohms..
Click to expand...

I got some 0.4mm with my Lemo which is what I tried it with, think that works out to 26awg?
 
W!ll said:
Right I took the plunge and purchased a Ehpro Kayfun 4 clone and while I'm loving the vaping experience while it's working I'm less than enamored about it's performance when it comes to filling.

Every time I come to fill the device I ensure that the juice control is totally closed and then open the top to fill it up and every single time I replace the cap the juice proceeds to flow straight out of the air holes, every time without fail. After this has happened I remove and clean out the base re-assemble the tank and with the remaining juice it vapes fine.

Anyone else experienced this problem?
Click to expand...

Have you tried inverting the atty, remove the deck but keep the chimney portion attached to the tank, then fill it through one of the holes from inside the chimney, screw it back together then invert it all back the correct way?

Also when the atty has been filled are you get air bubbles rising inside the tank?

My version is the Tobeco model & not had any leaks or issues when I have locked off the juice control then filled it from to top to just below the holes in the top of the tank section.

Hope this helps.

Cheers all
 
Got some nice vapemail today..

ZGQxDSel.jpg


A second SVB mod and Challenger MkIII 18500, things of beauty i tell thee!
 
Liquidfox said:
I got some 0.4mm with my Lemo which is what I tried it with, think that works out to 26awg?
Click to expand...

Sorry if I'm teaching you to suck eggs but you are pre burning the wire with a lighter? Some people say it's to remove the taste of the wire :confused:.. But I do it to make it less springle and hold shape.
 
W!ll said:
Right I took the plunge and purchased a Ehpro Kayfun 4 clone and while I'm loving the vaping experience while it's working I'm less than enamored about it's performance when it comes to filling.

Every time I come to fill the device I ensure that the juice control is totally closed and then open the top to fill it up and every single time I replace the cap the juice proceeds to flow straight out of the air holes, every time without fail. After this has happened I remove and clean out the base re-assemble the tank and with the remaining juice it vapes fine.

Anyone else experienced this problem?
Click to expand...

Tobeco clone here and thats never happened for me. Stupid question but you do have the juice control turned anti clockwise? I know that sounds stupid but...
 
roman59 said:
Have you tried inverting the atty, remove the deck but keep the chimney portion attached to the tank, then fill it through one of the holes from inside the chimney, screw it back together then invert it all back the correct way?

Also when the atty has been filled are you get air bubbles rising inside the tank?

My version is the Tobeco model & not had any leaks or issues when I have locked off the juice control then filled it from to top to just below the holes in the top of the tank section.

Hope this helps.

Cheers all
Click to expand...

I might be forced to get a needle nosed bottle for a while, nothing currently to hand thought so I need to fill it from the top.

Apparently after a quick search the o-ring that creates the seal between the air chamber and the juice closing flange is probably too small and not creating a seal to prevent the juice flowing through and the control to work.

Cheers.
 
DizzleDazzle said:
Got some nice vapemail today..

A second SVB mod and Challenger MkIII 18500, things of beauty i tell thee!
Click to expand...

That's a smart looking box, 18500.. how many batteries does it take and any chance of a picture of the internals?
I see the same picture posted on the SVB FB page :)
 
Last edited:
Love the SVB mods, they look very well made and very shiney cool!

Trying some 24 Certified juice today, kind of like butterscotch. It's okay.
 
How long does ground shipping from Fasttech take? The package was sent on 29/12/2014 and it says that it's departed HK yesterday, how much longer should I wait? (Darn Batteries!)

Thanks
 
I have had several FT deliveries, most arrive within 2 weeks, but one took just over 3, ive a friends who's last order took 4 as it was held in the uk for a week before getting over to N.I.
I have heard batteries take up to a month as they ship via land, also not advisable to buy batteries as they sell fake re wrapped batteries.
 
was that with batteries? I would assume normally they send stuff via airmail, but they have to send orders with batteries by boat/ship.

At the time of the order I couldn't get the samsung batteries in the UK at no where near the price but that was over 4 weeks ago and now they are everywhere for nearly the same price! Lesson learnt I guess... It's worth making two spearate orders, one for items with or that are batteries and one for everything else.
 
The friends order that took 4 weeks had no batteries, so airmail, but like I say, it got held up in England for a week for some reason.
I always double check the ship dates as not everything is in stock and will have a "Ships in XX business days", this can be 5, 7, 20 days...

As for Samsung 25r batteries, how much were they, I just bought 4 from Torchy, £29.99 delivered next day.
 
$11.03 so about £7.29 for two with case. Since then I've ordered two different sets of efest (four in toral) from uk suppliers, so I don't even really need them at the moment.
 
Well I have 3x 35amp 2500mah purple Efest, 4x 20amp 3100mah purple Efest and 4 Samsung 25r 2500mah, the Samsung's seam last longer than the 35amp Efests.
Also have 4x VTC5 that I got from UK E-Cig, so not sure if genuine, but they work ok but don't last as long as the Samsung either.
Just be careful with batteries, a lot of fakes out there, I have a m8 that bought a hana clone from FT that came with a purple Efest inside and it was a fake.
 
Status
Not open for further replies.
Back
Top Bottom