***The Vapers Lounge***

Status
Not open for further replies.
Uncle Petey said:
Dear diary, I got the Sigelei 100w and a Mutation X dripper today and holy ****balls, dem clouds... :D Seriously....

It vapes fine, but it's not quite sorted yet though, as the Ohm reading is jumping about a bit on the Sig with the MX.
Built an 0.8 dual coil, but it jumps from 0.4-0.8 odd.

Tried it with the Kayfun first and that stays solid at 1.6 as it should. Btw, this really has brought the Kayfun to life compared to my MVP2. Warmer vape with more flavour and cloudage fwiw.

Currently using these batteries, so I'll wait until tomorrow for the VTC5's to get here and do a proper build and test then.
Haven't gone past 20W or so yet with these batts and can't imagine what kind of madness would require anything approaching 100W.
Click to expand...

Are the post screws nice and tight on the MX? Slightly lose screws cause jumpy resistance readings quite often.
 
chris74 said:
80% pg or vg? I would try cleaning the contacts on the mod as vaping 4.8v at 1.8ohms is only just over 12 watts.

Also is that a protected battery? that may be the reason it isn't performing?

0.5ohm at 4.2volts (full charge) is 35watts and at 3.7volts is putting out 27 watts.

So something is not right.

Shot in the dark but I used to have a Nautilus that if I screwed either the coil on too tightly or even the full atty onto mvp too tightly often led to subpar performance.
Click to expand...

80% VG, It seems a bit better after cleaning the contacts the other day. I guess I'm just expecting loads of vapour when in reality I'm getting a bit more than my nautilis mini.
 
yaboydom said:
Ok so i might have gone overboard to get the best of both worlds i ordered the Silo
my reasoning is i have 10 aspire coils still to use and didn't want to waste them.
I then saw the mention of the pre made coils and wicks and that got me interested in the kayfun 3.1 so i bought a clone and pre made coils at 1.5 Ohm!

Hopefully i'll be all set next week thanks for all the suggestions i'll let you know i get on with both setups.

just 1 more question the only liquids i tend to use are the cheap fasttech liquids and switch2ecigs

i'd like a compromise more so on price rather than flavour 30ml for £10 is a little expensive for me does anyone have any recommendations for a more budget e liquid 40ml for £10 or even 50ml for £10 sorry if that sounds a bit specific but i'm quite a heavy user and tend to go through 5-6ml a day but don't want to start making my own due to laziness if im being honest.
Click to expand...

Nice one mate, hope you enjoy the toys! :D

Best way to get cheap juice is to make your own to be completely honest, this also enables you to tailor it to your exact liking, nic strength, flavour intensity, PG/VG ratio etc. ;)
 
slick rick said:
Are the post screws nice and tight on the MX? Slightly lose screws cause jumpy resistance readings quite often.
Click to expand...

As far as I know, yes.
Not too worried right now tbh, as I'll be doing a proper rebuild tomorrow anyway and we'll see what's what then :)

It probably is something to do with my quick and dirty build tbh since the KFL reads solidly.

Oh, also got some 24 Certified juice too. The jury's out given that I've only tried it on the very airy MX and still have to get through a tank full of Scopes secret sauce on the KFL before I can try it on there. Not a big fan of the sauce tbh.
Nothing's touched GVC so far :( That stuff is epically good...
 
Last edited:
Fair enough, I'll be going for a 0.1-0.3 build or something tomorrow and hope nobody calls the fire brigade.
My non vaping mates are gonna **** themselves when they see what this thing does :D

It's damn good fun.
 
Uncle Petey said:
Fair enough, I'll be going for a 0.1-0.3 build or something tomorrow and hope nobody calls the fire brigade.
My non vaping mates are gonna **** themselves when they see what this thing does :D

It's damn good fun.
Click to expand...

That will be good fun I guarantee, will gobble through juice mind if you crank the watts!

What strength is the juice you are using?
 
6mg and I'm a lung hitter. Should probably get some 0mg stuff for this lark tbh...

Oh yeah, having only used the KFL previously, the only way to get a straight to lung hit was to breathe in through the nose while taking a pull with that, otherwise, it's a mouth to lung job.
As you know, with all that airflow and a wide drip tip, something like the MX is like sucking a bong. No messing and because there's so much airflow, you don't really get the throat hit and it kinda surprises you to see all that vapour just pouring out :D

Ah, to be a noob :)
 
Uncle Petey said:
6mg and I'm a lung hitter. Should probably get some 0mg stuff for this lark tbh...

Oh yeah, having only used the KFL previously, the only way to get a straight to lung hit was to breathe in through the nose while taking a pull with that, otherwise, it's a mouth to lung job.
As you know, with all that airflow and a wide drip tip, something like the MX is like sucking a bong. No messing and because there's so much airflow, you don't really get the throat hit and it kinda surprises you to see all that vapour just pouring out :D

Ah, to be a noob :)
Click to expand...

The flavour on the Kayfun its excellent but the draw is to tight for me, you are right there, excellent for mouth to lung but to tight for lung inhale.

6mg shouldn't be to bad, I use 3mg myself for the RDA'S as I tend to chain vape quite often. Agreed it is quite comical how much vapour you exhale as the huge airflow cools the vape down a lot and it isn't harsh the plumes can be unexpectedly large. :D
 
I'm on a Kayfun 3.1 just now but not overly impressed with the wicking on it. It use to get dry hits all the time on the Vamo, the only thing stopping them now is the temp control on the rDNA. I'm going to skip the Kayfun 4 and get the Rose V2-S when it's available.
 
Wow trying on jeans in Debenham changing rooms in the metrocentre and I put my segelei 100w with genuine squape on the shelf being me. 1 hour later realised no segelei in pocket! Cue frantic rush back to find it sitting there even though the Lad said there had been loads of people in and out of said changing room!
 
oldestgregg said:
Wow trying on jeans in Debenham changing rooms in the metrocentre and I put my segelei 100w with genuine squape on the shelf being me. 1 hour later realised no segelei in pocket! Cue frantic rush back to find it sitting there even though the Lad said there had been loads of people in and out of said changing room!
Click to expand...
Phew, bet you felt a bit nauseous while rushing back to the shop.. It's like once I left the keys to a 3month old RVG250 in the bike, outside a pals flat in the worst place around this area.. With a dayglow yellow keyfob just to help it stand out :eek:
 
Hector said:
Phew, bet you felt a bit nauseous while rushing back to the shop.. It's like once I left the keys to a 3month old RVG250 in the bike, outside a pals flat in the worst place around this area.. With a dayglow yellow keyfob just to help it stand out :eek:
Click to expand...

I had a sweat on and defo felt a bit on the sick side! I get paid tomorrow so I was gonna another straight away though ;)
 
So guys as the Kayfun Lite plus is on sale price (not a clone) at the moment what are your thoughts on it?

Worth getting & reliable?

Only thing putting me off it is that the clear tank section is not glass :(

Cheers all
 
Got some vapemail!

QM24ndAl.jpg

A Sigelei 100w Plus, a Kayfun 3.1(clone) and Chemisis!(cloned Nemesis).

Free Black Silicon sleeve so whilst I was debating on getting the Champagne gold or Black I virtually get best of both worlds.

Red Carded for my Samsung batteries and Mutation X v2 clone from Essex vapours (cheers oldestgregg) and my Spectrum Vaping order so have the equipment but no nice juice to vape with.

Ah First world problems eh?.
 
Status
Not open for further replies.
Back
Top Bottom