- Joined
- 19 Nov 2008
- Posts
- 304
now the question is how hard is it to get hold of the koolance top, i am guessing hard as you had to import yours.
guess they are fully out of stock new?
guess they are fully out of stock new?
thanks
i dont know about if it is still possible will need to read up on that.
could always try and get a 350 from the mm i guess
but if you say the 355 is quiet that will be good enough i think, i have seen people saying the 355 is pointless compared to the 350 or the 655 tho... but guess that was with stock top.
what dose AV mean? im guessing your referring to a foam or rubber block?
thanks for the quick reply
in order of noise level, gpm for a typical cpu/gpu loop
D5 setting 1 (EK X-top rev2) – 0.69GPM
D5 setting 2 (EK X-top rev2) - 1.00GPM
D5 setting 1 – 0.62 GPM
D5 setting 3 (EK X-top rev2) - 1.35GPM
D5 setting 2 – 0.92 GPM
DB-1 – 1.09 GPM
-------
Ddc stock – whoosh like but quiet – 1.37 GPM
D5 setting 5 (EK X-top rev2) - 1.99GPM
D5 setting 3 – 1.26GPM
Ddc xspc top - 1.87GPM
Ddc xspc res top - 1.86GPM
D5 setting 4 (EK X-top rev2) - 1.72GPM
DDC pro (Alphacool res top) – 1.53GPM
-------
D5 setting 4 – 1.63GPM
D5 setting 5 – 1.89GPM
Troop sorry assumed someone elce posted there setup.
Sounds very good
my loop should only be a little bit more restrictive as im planing on using 7/16" tubing and planing on getting fatboy barbs but i will have more resistance from the extra rads.
guess my setup would be a medium flow?
D5 with top is best silent pump i tested - that why I use one
Also has option of faster/slower flowrate to help fill/bleed loop.
It's possable one of the eheim pumps is better... untill I borrow one I'll never know
Also look out for the Laing D5 Vario (same thing but not Swiftech-branded so may be cheaper).