Watercooled Case Gallery

seth1969 · 29 Mar 2016 at 20:41

Also managed to sort my titan x card sag out, was down to the slot holes for the pci covers being well to big poor qc phanteks.

Sorted it out by cutting a notch in the res cover which now holds it straight.

Butchered the bottom of case out with dremel as the e-loops in push next to the honeycombed steel mesh were making a right old racket.

All in all wish i had just bought a caselabs in the first place.

andrewohare · 1 Apr 2016 at 01:54

just finished moving from a corsair 750D to the corsair 540.. didn't go as smoothly as I hoped .. surprised me how big the 750D is in comparison.. still waiting for my 2nd Titan x to be returned from RMA but should be easy enough to add to the loop

anyway heres the pics

andrewohare · 4 Apr 2016 at 17:29

Added a transfer

Angst · 4 Apr 2016 at 20:40

http://imgur.com/a/sN8sF

tyler_jrb · 4 Apr 2016 at 20:52

andrewohare said:
Added a transfer

Looks great

. From your other pics, i would really love a desk that wide. Especially with room to fit a beer fridge under it

. I feel the urge to get a new desk sorted out now lol.

andrewohare · 4 Apr 2016 at 21:09

To be honest it was a very cheap desk using different bits of ikea stuff lol
The end piece was less than £30 for the top and the legs thing the drawers were 60ea and about 25 for the top

HenrySkates · 8 Apr 2016 at 22:06

Angst said:
http://imgur.com/a/sN8sF

How thick is that tubing? holy jeebus!

Angst · 9 Apr 2016 at 11:24

HenrySkates said:
How thick is that tubing? holy jeebus!

Well you know its all about the girth, its 19/13. I admit i may have gone a bit overboard with the selection but last time i watercooled i was limited to **** thin tubing for certain reasons so this time i wanted proper tubing.

David230 · 9 Apr 2016 at 13:27

Just finished mine. First WC custom loop for me only used AIO's previously and this is a massive step up!

khemist · 9 Apr 2016 at 13:53

Looks amazing!, anymore pics?.

David230 · 9 Apr 2016 at 13:55

Thanks a lot.

Yes, I put together a basic build log on the forum if you want to check it out.

https://forums.overclockers.co.uk/showthread.php?t=18724556

Mrnob · 9 Apr 2016 at 15:42

That's epic would love to do mine with copper one day

This never ends well · 21 Apr 2016 at 17:02

Swapped my pump from a ddc to a d5 photon 170, also removed the drive bays.

Drummond54 · 23 Apr 2016 at 15:38

"Tora Tora" - My First build

My first build. Phanteks Enthoo Evolv Mini ITX.

Spec: Asus Maximus VIII Impact, i5-6600k, AsusTurbo GTX970-OC-4GD5, G.Skill TridentZ Series 8GB DDR4-3000

Custom CPU water cooling loop, other mods include custom steel GPU backplate and cutting and install of 2 additional roof exhaust fans.

https://cdn.************.com/static/forever/images/userbuild/166126.5f8e5c549729bcaea6d7dc1f803fb79c.7ce2d0c81cc60cb58e8265c3e0ecdeb2.1600.jpg

https://cdn.************.com/static/forever/images/userbuild/166126.0a8224d6c70915b396416bddc0f1b4dc.a8794ea37367d4b7f5dee67174215c0e.1600.jpg

https://cdn.************.com/static/forever/images/userbuild/166126.c9cc1bd1ca82a4aa7e76a94951c35447.6fc32af7693bde2c9586e1e211f41c63.1600.jpg

https://cdn.************.com/static/forever/images/userbuild/166126.4aca26504f4ccd1b9acde65487b4181a.66e08abbefe70f70a25518f00b49773a.1600.jpg

Angst · 26 Apr 2016 at 21:11

Drummond54 said:
My first build. Phanteks Enthoo Evolv Mini ITX.

Thats pretty sweet, what pump and res are you using?

Drummond54 · 28 Apr 2016 at 08:33

Pump and Res

Thanks for the comments.
Pump is a Phobya DC12-260 PWM 12 volt pump and reservoir is an Aquacomputer White Aquatube Delrin.
Cooling works very well, but had some issues with the pump and the Asus Maximus VIII Impact MOB as the board does not support the pump on the CPU Fan header, so had to attach the pump to the Asus fan extension card to get PWM control, used the CPU fan header to control the Rad fans.

dtoo · 30 Apr 2016 at 14:28

Mr white

Case R1.0 MATX
Cpu i7 6700
Gpu R9 295x2
Motherboard asus gene
DDR4 16GB Dominator

~>Dg<~ · 30 Apr 2016 at 14:30

nice to see you got it in the end

very nice build :cool:

Shilz · 30 Apr 2016 at 15:46

My first custom loop in a Corsair 760T

Trunkey · 30 Apr 2016 at 19:32

dtoo said:
Case R1.0 MATX
Cpu i7 6700
Gpu R9 295x2
Motherboard asus gene
DDR4 16GB Dominator

Love this and similar to my own planed build, only I'm going green, any one able to say what make the fittings and pump res combos are?
Dtoo how did you find cutting the holes for tubes and fittings?