Watercooled Case Gallery

Just changed the tubing around in my rig doesnt really compare to the last few though :P

411267_2913196067618_1192144726_32492086_63938709_o.jpg
 
looks awesome too :eek:

going to be using the same res as that in my build which will be done as a cpu only loop this weekend :) will add my 5870 to the loop and get some more stuff too when I get the money :)
 
Many Thanks
Lots of messing about with res & pump location.

System
-------------
Asus Rampage II Gene x58
Intel i7 920 DO@ 3.80ghz @default Voltage
GeForce GTX 480 SLI @ 800/1600/2000 @default Voltage
Corsair Vengeance 12GB @ 1600mhz 1.5v
Enermax Revolution 85+ 1050W

WaterCooling
-------------
EK Supreme LTX
AquagraFX GTX 480 x2
Alphacool Laing D5
EK-D5 X-Top V2
EK-CoolStream RAD XT 240 x2
Phobya Balancer 150
Front Radiator= Noctua NF-P12 x2-Push & Fractal Design 1200rpm-Pull
Top Radiator= Scythe Slip Stream Slim 2000rpm-Pull
Primochill 7/16 Tubing
EK 7/16 Compression Fittings

CPU Temps= 41c Idle \ 68c Load (Prime 95)
GPU Temps= 35c Idle \ 58c Load (Kombuster)
 
Dakilla said:
Many Thanks
Lots of messing about with res & pump location.

System
-------------
Asus Rampage II Gene x58
Intel i7 920 DO@ 3.80ghz @Default Voltage
GeForce GTX 480 SLI @ 800/1600/2000 @Default Voltage
Corsair Vengeance 12GB @ 1600mhz 1.5v
Enermax Revolution 85+ 1050W

WaterCooling
-------------
EK Supreme LTX
AquagraFX GTX 480 x2
Alphacool Laing D5
EK-D5 X-Top V2
EK-CoolStream RAD XT 240 x2
Phobya Balancer 150
Front Radiator= Noctua NF-P12 x2-Push & Fractal Design 1200rpm-Pull
Top Radiator= Scythe Slip Stream Slim 2000rpm-Pull
Primochill 7/16 Tubing
EK 7/16 Compression Fittings

CPU Temps= 41c Idle \ 68c Load (Prime 95)
GPU Temps= 35c Idle \ 58c Load (Kombuster)
Click to expand...

This looks Fantastic, what is the link between the two graphics cards?
 
Dakilla said:
Many Thanks
Lots of messing about with res & pump location.

System
-------------
Asus Rampage II Gene x58
Intel i7 920 DO@ 3.80ghz @Default Voltage
GeForce GTX 480 SLI @ 800/1600/2000 @Default Voltage
Corsair Vengeance 12GB @ 1600mhz 1.5v
Enermax Revolution 85+ 1050W

WaterCooling
-------------
EK Supreme LTX
AquagraFX GTX 480 x2
Alphacool Laing D5
EK-D5 X-Top V2
EK-CoolStream RAD XT 240 x2
Phobya Balancer 150
Front Radiator= Noctua NF-P12 x2-Push & Fractal Design 1200rpm-Pull
Top Radiator= Scythe Slip Stream Slim 2000rpm-Pull
Primochill 7/16 Tubing
EK 7/16 Compression Fittings

CPU Temps= 41c Idle \ 68c Load (Prime 95)
GPU Temps= 35c Idle \ 58c Load (Kombuster)
Click to expand...

What about the window for the case, did you do that yourself?
 
Probably with a dremel or a jig saw i'd imagine?

Currently in the process of making a window for my design XL but have decided to use a while sheet of perspex rather than cut into my side panel.
 
Yeah, I'm just wondering if thats like u-channel from mnpctech. Cause if its different and cheaper to get it in the UK then I can grab some of that.

Bet its going to be a user that signs up and then disappears till they get stuck Dx
 
It's the Feser SLI VID Connector - 1/2/3 Slot Kit.
The window was done with a jigsaw.
Edging is 1.5mm Blowhole Trim, 49p per metre from the uk.
 




Yes the SATA from HDD has been moved :P it was there just to install os while i waited for delivery of longer one!

Did this build just b4 xmas, just need 7970 blocks to finish it off!
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom