What is your VID Rating - Q6600 Post here!!!!

pastymuncher · 20 Dec 2008 at 13:51

Despite what a lot of people think, vid is'nt the be all and end all when it comes to clocking. Mine had a 1.35 vid and was still prime stable at 3.8Ghz with 1.52v. It did 3.6Ghz on a more reasonable 1.45v.

Leebone · 20 Dec 2008 at 21:33

VID:1.2375

3.6 @ 1.35v

On a 680i A1, yes you did read that correctly

realscot · 21 Dec 2008 at 12:18

VID: 1.2625
24/7 3.8ghz @ 1.425 - 30/30/25/25c idle never hits 50 on any core loaded.
Bench + 24hr prime stable 4.01ghz 1.51v 53/53/47/48 max over 24hrs.
Never tried higher, 4ghz was what i wanted to achieve, and I did.

PistolPete · 21 Dec 2008 at 12:34

VID: 1.35v
Mines an L8xxxxxx and I've not really played with it other than changing the FSB from 266 to 333 to get 3Ghz.
As soon as I push it to 334 to locks up solid!
Once I get a decent cooler and a better mobo I'll start fiddling with the voltages and getting a reasonable overclock from it.

juno_first · 21 Dec 2008 at 13:52

B3 VID 1.30v

1.512v at 3.6, been running since june 2007 at this speed: 98c under load

I did notice the G0 stepping dies at a much lower tamp: around 80c.

realscot · 21 Dec 2008 at 14:09

juno_first said:
B3 VID 1.30v

1.512v at 3.6, been running since june 2007 at this speed: 98c under load

I did notice the G0 stepping dies at a much lower tamp: around 80c.

98c load and watercooled :eek:

? something wrong there i'm thinking

juno_first · 21 Dec 2008 at 14:32

Naa, Intel say the chip can run at 100c for 10years.
My rig is totally stable & has been for over a year.
Anyone else have a b3 here?

willy · 21 Dec 2008 at 14:37

P5Q Deluxe
Q6600 GO --> 3.3GHz
vCore 1.4V
VID 1.3250
Temp (intelburn test 10x) 61, 61, 58, 58

Where can i see my batch no?

Thanks

setter · 21 Dec 2008 at 14:45

willy said:
P5Q Deluxe
Q6600 GO --> 3.3GHz
vCore 1.4V
VID 1.3250
Temp (intelburn test 10x) 61, 61, 58, 58

Where can i see my batch no?

Thanks

Batch no can be found on the retail box or printed on top of the cpu itself.

willy · 21 Dec 2008 at 14:54

Oh well better get in to the loft to find the box now then

Thanks

willy · 21 Dec 2008 at 15:18

Just checked and my batch L84xxxxxxxxx
Good enough for me as i get 900MHz OC

Alexrose1uk · 21 Dec 2008 at 15:34

Mines got a VID of 1.25V
Running 3.4Ghz with a voltage of approx 1.4V, load approx 65deg c
Keep thinking now its fully burned in with the Zalman 9500 I have might try reclocking it some time for improved heat/power usage.

chuffnut · 21 Dec 2008 at 15:45

Vid 1.2750 G0
Running at 3ghz @1.25625v.
35c idle.

tibbsey · 21 Dec 2008 at 16:31

B3 @ 3.108GHz
VID = 1.3250 (according to RealTemp) - hopefully will drop, still testing.
VCore = 1.328 (according to CPU-Z)

Idleish at 45/47/43/45 with RealTemp using TJMax of 95

psychas · 21 Dec 2008 at 18:05

1.2625vid 3.6ghz 1.38v

Sean_UK · 21 Dec 2008 at 18:27

-GO @ 3.7GHZ
-Vid 1.2875
-BIOS 1.450v
-CPU-Z 1.436v @ 100% load
-Load temps 67/67/62/62
-Idle temps 41/40/35/35

V|per · 21 Dec 2008 at 19:32

Slashiem said:

Absolutely identical to mine, except that all my cores are on 43°c (on 100% load)

That was at 1.416v in cpu-z

willy · 21 Dec 2008 at 22:32

Just wondering why some of you change the divider to 8 instead of 9? More advantage for OC-ing?

Thanks

setter · 21 Dec 2008 at 22:37

This allows you to run a higher fsb, eg 9x400fsb, or 8x450fsb, both =3.6ghz. this is my limited knowledge of it, as ive never clocked on the 8x multi yet

willy · 21 Dec 2008 at 22:40

I thought for higher FSB will stress the mobo more?