Z68 Extreme4 Gen3

Westie · 2 Mar 2015 at 20:29

Yea i was thinking the same but just really wanted to make sure... Recommend any z77 or any other boards that will be decent with my 2500k? It's a good clocked 5ghz under water I had on my asrock..

Thanks for the reply

Davefran · 3 Mar 2015 at 00:48

Westie said:
My pc froze last night and now won't post all I get is pc powers up and code 69 on the lcd display on the motherboard...

I've unplugged everything except cpu and one stick of ram and still same error.. No display no beeps even disconnected my ssd... Tried to clear cmos take battery out etc and nothing happens.. Just case fans spinning

Specs

I5 2500k
Asrock extreme 4 Gen 3
Corsair Xms 8gb
Geforce 970 gigabyte g1
Xfx 650 psu
Crucial m4 ssd
Samsung 2tb hdds
I have no other pc parts to test with atm so any ideas would be appreciated

Ta

have a look back at post number 722 in this thread, exactly the same thing was covered then

Westie · 3 Mar 2015 at 01:02

Yea he posted a few threads under that post and found out it was a dead ssd drive.. I don't even have any drives connected to motherboard and still the same.. No signal to screen case fans spinning no beeps and error 69 on the Dr debug screen..

So it can't be the ssd

the only things connected to the mobo is case buttons, case fans, cpu and cpu fan, one stick of ram and psu and monitor is connected to onboard as I removed my 970..

_Jimlad_ · 3 Mar 2015 at 10:44

Anything on google for that post number ?

Westie · 3 Mar 2015 at 13:59

Code 69 is "north bridge dxe initilisation"

TaKeN · 10 Mar 2015 at 19:24

AMDMatt said:
Here's a few to get you started and should remove all the ? marks from device manager after a fresh install.

Intel INF driver - https://downloadcenter.intel.com/De...rsion=Windows 8, 64-bit*&DownloadType=Drivers

Intel Management Engine driver - https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23091

Intel rapid Storage Technology - 16.72MB - https://downloadcenter.intel.com/De...eng&OSVersion=Windows 8*&DownloadType=Drivers

Are these still the best to use?

I've been having some speed issues with my Samsung 840 Pro 256gb, the read speed is fine, but the write speed is awful, with low iops.

When running AS SSD it shows the iaStorA so the drivers seem to be correct