Fallout 4 CPU benchmark thread(need some Zen3 and Zen4 results!)

papasmurf · 6 Dec 2022 at 22:02

Would it be worth replacing 5800x with 5800x3D for F4? I get drops into mid 20's downtown Boston, especially around the USS Constitution. With RTX3070.

KompuKare · 6 Dec 2022 at 22:40

papasmurf said:
Would it be worth replacing 5800x with 5800x3D for F4? I get drops into mid 20's downtown Boston, especially around the USS Constitution. With RTX3070.

Probably the easiest upgrade you can do. Unfortunately nobody on our list has done a like-for-like 5800X/5700X to 5800X3D comparison.

However, downtown is probably closer to S2 and the average S2 score for a 5800X is 90 while the 5800X3D is 129 and that's around +40%.

Yes, the absolute S2 champion is a 13700K (surprisingly with "just" highly tuned DDR4), but while the best 5800X3D does have good memory, memory tuning is less of a requirement there.

papasmurf · 17 Dec 2022 at 08:37

Not a bad result. I didn't run your standard test. Just loaded a saved game, where I knew I was CPU-bound. 5800x had a volt offset to boost to 5Ghz. 5800x3D is stock.

bobharris · 23 Jan 2023 at 01:03

Well. Moved from a 1080 to a 6800 and noticed 0 increase in performance in F4 on a 4770k @ 4.0Ghz. I know. Ancient CPU. Yet see a 2x increase (the delta I was buying at) in CyberPunk.

32GB PC3-17100 DDR3 2133.

11700 -- 40fps.
8000 -- 47fps.

I'm trying not to build a Starfield...rig before it comes out.
Using this table to buy my next CPU as I play a lot of F4. Thanks for getting this all together.

KompuKare · 23 Jan 2023 at 08:46

bobharris said:
Well. Moved from a 1080 to a 6800 and noticed 0 increase in performance in F4 on a 4770k @ 4.0Ghz. I know. Ancient CPU. Yet see a 2x increase (the delta I was buying at) in CyberPunk.

32GB PC3-17100 DDR3 2133.

11700 -- 40fps.
8000 -- 47fps.

I'm trying not to build a Starfield...rig before it comes out.
Using this table to buy my next CPU as I play a lot of F4. Thanks for getting this all together.

So that puts you in 2nd last (my old i5 3570K is still the lowest even below the APUs.

As for Starfield: we live in (unrealistic) hope that Bethesda with all the money they have these days will release a game which isn't half finished. The good part of Bethesda's release: there's no point in rushing and paying full-price unless you like beta-testing!

hster · 10 Mar 2023 at 00:14

Some confoundingly subpar results to report.

CPU: Core i9-9900K @ 4.8 GHz GPU: RTX 3080ti
RAM: 32GB (4x8GB) DDR4 3200MHz OS: Windows 10 64bit

Corvega- Draw Calls: 11040 FPS: 62.4
Diamond City- Draw Calls: 8105 FPS: 78.4

Is it my crappy single rank RAM?

KompuKare · 10 Mar 2023 at 08:43

hster said:
Is it my crappy single rank RAM?

Thanks for posting your resutls.

Unsure whether it is your RAM.
The only other 9900K's in there are Robert896r1's highly tuned ones with very good RAM but his memory tuning is world class.

CAT-THE-FIFTH · 10 Mar 2023 at 11:10

hster said:
Some confoundingly subpar results to report.

CPU: Core i9-9900K @ 4.8 GHz GPU: RTX 3080ti
RAM: 32GB (4x8GB) DDR4 3200MHz OS: Windows 10 64bit

Corvega- Draw Calls: 11040 FPS: 62.4
Diamond City- Draw Calls: 8105 FPS: 78.4

Is it my crappy single rank RAM?

Maybe your positioning when getting the FPS isn't helping as the drawcall numbers indicate you are in a different position. You will lose a few FPS that way. This is roughly where u need to be:

Fallout 4 CPU benchmark thread(need some Zen3 and Zen4 results!)

Background A few of us still play some of the old Creation Engine based games such as Fallout 4. Annoyingly a lot of reviewers don't seem to test older games anymore,and these generally benefit the most from better single threaded performance,faster memory speeds,etc. Fallout 4 tends to be...

forums.overclockers.co.uk

Also what are you memory subtimings? 3200CL16? 3200CL18?

RavenXXX2 · 12 Mar 2023 at 11:33

13600k P core @ 5.8Ghz E core @ 4Ghz
DDR4 2x16GB dual rank @ 4133Mhz CL15 tuned.
Hyperthreading disabled.
3060ti

KompuKare · 12 Mar 2023 at 14:48

RavenXXX2 said:
13600k P core @ 5.8Ghz E core @ 4Ghz
DDR4 2x16GB dual rank @ 4133Mhz CL15 tuned.
Hyperthreading disabled.
3060ti

That puts you at the new #1 slot:

Added a % from the max column too. The top 10 or so don't have much between them but some of the other do.

Still waiting for Zen4 3D results - me and CAT have already begged on the Zen4 3D thread a few times but no luck so far.

Robert896r1 · 12 Mar 2023 at 19:32

RavenXXX2 said:
13600k P core @ 5.8Ghz E core @ 4Ghz
DDR4 2x16GB dual rank @ 4133Mhz CL15 tuned.
Hyperthreading disabled.
3060ti

Can’t get more out of your ecores? 45-46x should be fine with L2 around 1.25v

Won’t help here but overall

RavenXXX2 · 12 Mar 2023 at 20:19

I could but they suck down more power, not to bothered about the ecore OC.

domdtxdissar · 13 Mar 2023 at 08:36

KompuKare said:
Still waiting for Zen4 3D results - me and CAT have already begged on the Zen4 3D thread a few times but no luck so far.

I can do a highly tuned 7950x3d run when i get around to it, hopefully this week

KompuKare · 13 Mar 2023 at 08:38

domdtxdissar said:
I can do a highly tuned 7950x3d run when i get around to it, hopefully this week

Thanks in advance.
The instructions are in the OP. Not the easiest benchmark but not the hardest either.
It's windowed at 480P or so, so if you have trouble reading the output (you have to try and match the drawcall count we all use) then switching to a lower desktop resolution might help.

domdtxdissar · 13 Mar 2023 at 08:40

KompuKare said:
Thanks in advance.
The instructions are in the OP. Not the easiest benchmark but not the hardest either.
It's windowed at 480P or so, so if you have trouble reading the output (you have to try and match the drawcall count we all use) then switching to a lower desktop resolution might help.

I know, i'm "Det0x" from you leaderboard above

(#1 with regular Zen3 and Zen4)

CAT-THE-FIFTH · 13 Mar 2023 at 08:49

RavenXXX2 said:
13600k P core @ 5.8Ghz E core @ 4Ghz
DDR4 2x16GB dual rank @ 4133Mhz CL15 tuned.
Hyperthreading disabled.
3060ti

Number One on the leaderboard!

domdtxdissar said:
I can do a highly tuned 7950x3d run when i get around to it, hopefully this week

Any chance you can run the CPU in dual and single chiplet mode please?

domdtxdissar · 16 Mar 2023 at 20:49

User: domdtxdissar/Det0x
7950x3d PBO CO
6600MT/s tight timings, 2166mhz FCLK --> same memory settings as shown here: https://imgur.com/a/PTDq9Sl
SMT disabled
3090

Both CCD's enabled and "24/7 settings".

Corvega- Draw Calls: 7993 @ 167.2 FPS
Diamond City- Draw Calls: 11719 @ 134.8 FPS

Fallout 4 CPU benchmark thread(need some Zen3 and Zen4 results!) - dual CCD results

Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users.

imgur.com

CCD1 disabled, 106 baseclock
Corvega- Draw Calls: 7999 @ 178.6 FPS
Diamond City- Draw Calls: 11701 @ 141.9 FPS

Fallout 4 CPU benchmark thread(need some Zen3 and Zen4 results!) - single CCD results

Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users.

imgur.com

CAT-THE-FIFTH · 16 Mar 2023 at 22:18

domdtxdissar said:
User: domdtxdissar/Det0x
7950x3d PBO CO
6600MT/s tight timings, 2166mhz FCLK --> same memory settings as shown here: https://imgur.com/a/PTDq9Sl
SMT disabled
3090

Both CCD's enabled and "24/7 settings".

Corvega- Draw Calls: 7993 @ 167.2 FPS
Diamond City- Draw Calls: 11719 @ 134.8 FPS

Fallout 4 CPU benchmark thread(need some Zen3 and Zen4 results!) - dual CCD results

Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users.

imgur.com

CCD1 disabled, 106 baseclock
Corvega- Draw Calls: 7999 @ 178.6 FPS
Diamond City- Draw Calls: 11701 @ 141.9 FPS

Fallout 4 CPU benchmark thread(need some Zen3 and Zen4 results!) - single CCD results

Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users.

imgur.com

A massive increase in performance!

Edit!!

The performance increase over the Ryzen 9 7950X you tested is massive!

KompuKare · 17 Mar 2023 at 07:21

domdtxdissar said:
User: domdtxdissar/Det0x
7950x3d PBO CO
6600MT/s tight timings, 2166mhz FCLK --> same memory settings as shown here: https://imgur.com/a/PTDq9Sl
SMT disabled
3090

Both CCD's enabled and "24/7 settings".

Corvega- Draw Calls: 7993 @ 167.2 FPS
Diamond City- Draw Calls: 11719 @ 134.8 FPS

Fallout 4 CPU benchmark thread(need some Zen3 and Zen4 results!) - dual CCD results

Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users.

imgur.com

CCD1 disabled, 106 baseclock
Corvega- Draw Calls: 7999 @ 178.6 FPS
Diamond City- Draw Calls: 11701 @ 141.9 FPS

Fallout 4 CPU benchmark thread(need some Zen3 and Zen4 results!) - single CCD results

Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users.

imgur.com

There you go: way at the top:

Not only that but a huge leap from your previous 7950X with the same setup.
Or summaries vs your 7950X score and the top scored 13600K

Fallout 4 loves Zen4 3D.

EDIT: updated the memory specs on the table.

domdtxdissar · 17 Mar 2023 at 07:32

Thanks for update
Small comment, 7950x3d runs were done @ 6600MT/s, not 6400MT/s

My Zen3 run were also done with a 5950x (3800MT/s 1900FCLK CL13-14-12-28), not a 5850.