OcUK H²Flo Liquid CPU Cooler - IN STOCK NOW! (now with benchmarks)

Ace Modder · 12 Sep 2011 at 14:39

The unit is built, you just need to provide the fan and screw it into the chassis case. It's much the same as the H60.

fowler002 · 12 Sep 2011 at 15:11

Ace Modder said:
The unit is built, you just need to provide the fan and screw it into the chassis case. It's much the same as the H60.

thanks, not seen/used a h60 etc in the 'flesh as it were' so wasn't sure. do we need to change/topup fluid over time?

how does it measure upto a h80 & h100?

Ace Modder · 12 Sep 2011 at 15:29

You do not need to change or top up the fluid, as it is a completed closed, sealed unit, there is no where for the fluid to go too.

Tokin · 12 Sep 2011 at 15:45

Just ordered one of these,fingers crossed should have it tomorow

logi-cat · 12 Sep 2011 at 16:08

Just ordered one, can't wait

Scythe · 12 Sep 2011 at 16:15

Mine has just shipped. Could've saved £2 if I waited another 8 hours to this morning to order, damn it!

Should be here tomorrow, I only live down the road but have got no transport to go pick it up myself at the moment.

fowler002 · 12 Sep 2011 at 16:33

are these worth it over the gelid tranquillo? I have a arctic freezer 7 pro rev2 I was going to use for the time being but the price of the tranquillo was getting me thinking about getting one, this is ~£14 more. I have a few different fans already which I'll try before buying anymore if the temps/noise isn't satisfactory.

welshdragon · 12 Sep 2011 at 16:41

Just in case its's of any use to people. I get similar (within a few degrees) temps with my kuhler 920 and this is half the price! Darn you ocuk! I ahve two vipers on my 920 in push and pull.

Ace Modder · 12 Sep 2011 at 16:43

fowler002 said:
are these worth it over the gelid tranquillo? I have a arctic freezer 7 pro rev2 I was going to use for the time being but the price of the tranquillo was getting me thinking about getting one, this is ~£14 more. I have a few different fans already which I'll try before buying anymore if the temps/noise isn't satisfactory.

Yes, the performance is better than the tranquillo and the Freezer 7.

Ace Modder · 12 Sep 2011 at 16:43

welshdragon said:
Just in case its's of any use to people. I get similar (within a few degrees) temps with my kuhler 920 and this is half the price! Darn you ocuk! I ahve two vipers on my 920 in push and pull.

Exactly, hence the deal with the manufacturer

I like giving our customers cheaper products.

iBSOD · 12 Sep 2011 at 16:49

Azza said:
That because you've got an overclocked 140W TDP chip that consumes over 220W under load at stock speeds!

I have the C3, so 125w.

fowler002 · 12 Sep 2011 at 16:50

Ace Modder said:
Yes, the performance is better than the tranquillo and the Freezer 7.

obviously but £14 better(before factoring in the price of a fan tho I have a few so no extra for the time being)?

edit: gave in and ordered, hope you don't sell it for sub £35 next week, bought the 128gb m4 for £140 and week later you had it for £135.

it1uk · 12 Sep 2011 at 17:20

Would there be much difference in temps with this compared to a Titan Fenrir?

I7 860 @ 3.6GHz in a HAF-X case.

Scougar · 12 Sep 2011 at 17:23

I would really like to know about comparison to the fenrir as well :-)

Also.. how noisy are the pumps please? (Shame you aren't doing a double height rad btw).

fowler002 · 12 Sep 2011 at 17:33

was thinking about a fenrir evo as it matches the extreme7 colour scheme but ended up ordering this, hope the rad fits in the lian li a05

-Mike- · 12 Sep 2011 at 17:36

fowler002 said:
are these worth it over the gelid tranquillo? I have a arctic freezer 7 pro rev2 I was going to use for the time being but the price of the tranquillo was getting me thinking about getting one, this is ~£14 more. I have a few different fans already which I'll try before buying anymore if the temps/noise isn't satisfactory.

Personally I'd stick another fan to the rear of your freezer 7 pro in push pull. You'll be amazed at the difference and if you have one laying around then cost to yourself is £0

Mr Krugga · 12 Sep 2011 at 17:44

iBSOD said:
I have the C3, so 125w.

Don't worry about him, he either pulled that figure out of his **** or can't read the power consumption charts.

jackboy · 12 Sep 2011 at 17:51

Personally I'd stick another fan to the rear of your freezer 7 pro in push pull. You'll be amazed at the difference and if you have one laying around then cost to yourself is £0

How do you do this?

fowler002 · 12 Sep 2011 at 17:53

-Mike- said:
Personally I'd stick another fan to the rear of your freezer 7 pro in push pull. You'll be amazed at the difference and if you have one laying around then cost to yourself is £0

how would you do that? it doesn't have attachment for 2nd fan.

InfiniteNoise · 12 Sep 2011 at 17:57

Does it come with the screws needed to attach the fan to the rad? I can't seem to find anything about this.