ASROCK X570 TAICHI - THE RYZEN 3000 MOTHERBOARD GIBBO & 8 PACK RECOMMENDS

Danthus · 16 Apr 2020 at 14:42

I am confident there is nothing wrong with the RAM, it came out of a fully functioning Intel based system.

If I leave everything at stock and just enable XMP etc it will blue screen.

Awahwah · 16 Apr 2020 at 15:10

BIOS version? I'm on 2.70

Danthus · 16 Apr 2020 at 15:12

Danthus · 16 Apr 2020 at 15:13

i have had the same problems with all BIOSes

Awahwah · 16 Apr 2020 at 15:19

Ok, try selecting XMP and changing the RAM volts to 1.4v.

Danthus · 16 Apr 2020 at 15:24

Will do, keep my SOC voltages the same for now?

Awahwah · 16 Apr 2020 at 16:02

OldCoals said:
Will do, keep my SOC voltages the same for now?

Yep

Danthus · 16 Apr 2020 at 16:54

I can't find all of the Cad Bus settings in the BIOS.

Awahwah · 16 Apr 2020 at 18:49

They are there but in a odd location, I'll look in a mo and let ya know.

Awahwah · 16 Apr 2020 at 19:36

@OldCoals Dram timing config\cad bus\cad bus drive strength

Danthus · 16 Apr 2020 at 21:32

Foud it although some the values in the DRAM calculator don't have a corresponding entry in the BIOS.

Also, where do you find the BGS setting?

Panos · 16 Apr 2020 at 22:02

OldCoals said:
Foud it although some the values in the DRAM calculator don't have a corresponding entry in the BIOS.

Also, where do you find the BGS setting?

All settings are in the X570 Taichi, except the tFRC Alt

Danthus · 16 Apr 2020 at 22:13

Yeah, where?! :-)

Panos · 16 Apr 2020 at 23:24

OldCoals said:
Yeah, where?!

Advanced > AMD CBS > UMC Common Options > DRAM Memory Mapping

Shac · 17 Apr 2020 at 00:49

I have never bothered entering the BGS data as I never found it in the bios!

Danthus · 17 Apr 2020 at 08:11

I have found the BGS.

I have entered all the values as per DRAM Calculator.

The PC boots but some times in Windows everything hangs, particularly when you open a program, even CPU-Z doesn't load properly.

What next?

Panos · 17 Apr 2020 at 10:53

OldCoals said:
I have found the BGS.

I have entered all the values as per DRAM Calculator.

The PC boots but some times in Windows everything hangs, particularly when you open a program, even CPU-Z doesn't load properly.

What next?

You use SAFE or FAST?

Danthus · 17 Apr 2020 at 11:27

Safe.

Panos · 17 Apr 2020 at 11:36

OldCoals said:
Safe.

Try the ALT values. Use the REC/MAX ones for more power.

Make also sure you put the correct values. DRAM Calculator doesn't have them in order as they are on the X570 Taichi bios.

fizzy · 17 Apr 2020 at 11:42

fizzy said:
I haven't had the 8d error on 2.10 with xmp on. Only started occuring on 2.80, and not all the time. I've got ram voltage up from 1.35 to 1.375 which so far seems to have sorted it. Using 8 pack branded memory.

I spoke too soon - cold boot issues again this morning. Went into bios and everything reset. Loaded up my saved profile and rebooted and all ok (although date was ok, time was out a few hours?). Think I'll be going back to 2.10, or possibly giving 2.73 a try.