GameMax F15M Gaming Case (Budget Cooler Master H500M)

Lee C · 19 May 2020 at 11:40

Did anyone get 2 of the magnetic filters? I have 2 and im sure on the reviews ive read it only came with 1?

mr1000 · 19 May 2020 at 12:00

Lee C said:
Did anyone get 2 of the magnetic filters? I have 2 and im sure on the reviews ive read it only came with 1?

Yep, one for the top and one behind the front fans.

TNA · 19 May 2020 at 12:35

Lee C said:
Did anyone get 2 of the magnetic filters? I have 2 and im sure on the reviews ive read it only came with 1?

Pretty sure he said one at the bottom (the third one) was not magnetic. Nothing about there only being one magnetic.

sgoaty · 19 May 2020 at 14:00

My front one was rattling around inside the case and is a bit damaged. I emailed the supplier but have had no response as yet. Front and top are magnetic, bottom is not.

aaronjunited · 22 May 2020 at 09:58

What boards should I pair with this case guys (B450/550) Just got it delivered and I remembered it's A-RGB. So does RGB still work with it?

mr1000 · 22 May 2020 at 11:54

aaronjunited said:
What boards should I pair with this case guys (B450/550) Just got it delivered and I remembered it's A-RGB. So does RGB still work with it?

The RGB works independently of the motherboard via remote (and / or reset button if you want)

It can be plugged into and controlled by the motherboard if you prefer via either the ARGB or VDG connectors.

aaronjunited · 22 May 2020 at 14:33

mr1000 said:
The RGB works independently of the motherboard via remote (and / or reset button if you want)

It can be plugged into and controlled by the motherboard if you prefer via either the ARGB or VDG connectors.

Ok I see the difference now when explained like that. Thanks.

AnthonyA85 · 24 May 2020 at 03:29

Does anyone know where i can find the online manual for the Gamemax Kamikaze pro? i'm thinking of getting one to put my new system in (this cosmos 2 is just too big), but i can not find the online manual anywhere, i want to make sure it'll have enough width clearance for my RTX 2070S (i know it'll fit the length, but i've run into issues in the past where a case i had was not wide enough for the GPU's power cables with the side panel on)

aaronjunited · 24 May 2020 at 18:23

I need assistance with ARGB and the MSI b450 boards with this case. What will I need to get the ARGB working with MSI B450 GAMING PRO CARBON AC? Will the argb hub work with this board?

mr1000 · 24 May 2020 at 20:17

aaronjunited said:
I need assistance with ARGB and the MSI b450 boards with this case. What will I need to get the ARGB working with MSI B450 GAMING PRO CARBON AC? Will the argb hub work with this board?

Yes, that board has 1 x 5v argb header, plug the hub into that and you should be good using MSI's Mystic Light software to control it.

aaronjunited · 24 May 2020 at 23:37

mr1000 said:
Yes, that board has 1 x 5v argb header, plug the hub into that and you should be good using MSI's Mystic Light software to control it.

Thanks! That's good news then.

scoop · 25 May 2020 at 14:37

AnthonyA85 said:
Does anyone know where i can find the online manual for the Gamemax Kamikaze pro? i'm thinking of getting one to put my new system in (this cosmos 2 is just too big), but i can not find the online manual anywhere

Wondered if you went for the Kamikaze in the end? Was also looking for the manual for it and couldn’t find it....

AnthonyA85 · 25 May 2020 at 17:15

I haven't ordered it yet, and now, i can't find the manual either, google doesn't turn up anything. You'd think the company that made them would put the manuals online, everyone else does.

Fyter · 25 May 2020 at 18:03

This or the NZXT 510?

pcrag · 30 May 2020 at 08:20

Hi folks. Just bought this and a new b450 Steel Legend. I've got the RGB working via the add plug. Off of that was an old 4 socket and a vdg. Am I right in thinking I only need the newer add plugged into mobo and the other 2 connections are there for back up?

Also, the fan for the case are plugged into the little box on the back, same as RGB. Am I supposed to be able to control fans somehow with them plugged in there, or do I need to unplug all 3 fans and plug them separately into mobo?

Cheees

cathain · 31 May 2020 at 14:44

The ' little box on the back' is a hub, you can plug in all fan power and rgb leads into that, then you just need to connect power to the hub straight from the psu and the argb cable to the motherboard. I have the same motherboard and I was confused with the cable marked 'vdg' coming out of the hub but then I realised I don't need to plug it into anything as the Steel Legend doesn't even have a vdg header.

Rambo89 · 5 Jun 2020 at 08:05

Built a new system with a Kamikaze Pro case with the B450m Steel Legend motherboard, anyone else running a similar setup and has the RGB passthrough working? I connected the cable to the motherboard but the Fan LEDS are not being controlled, i know that the port is working as i've plugged my AIO into the header and i can control this with the asrock software but if i plug the hub in i can only control the LEDS from the case button.

Do you need to unplug the cable for the LED button? Didn't come with a manual so hard to find how its supposed to go.

TNA · 5 Jun 2020 at 08:50

I don't use it unfortunately. I just use the remote control that came with the case to control everything.

Matt_West_Mids · 5 Jun 2020 at 15:59

mr1000 said:
AIO arrived today, really easy to install. (Before and after):

Temps look really good, currently sitting at 24 degrees idle and all I can hear is the case fans.

Is that the ARCTIC Liquid Freezer II 240 AIO?

thinking of doing a similar thing. Is it acting as an exhaust?

mr1000 · 5 Jun 2020 at 17:13

Matt_West_Mids said:
Is that the ARCTIC Liquid Freezer II 240 AIO? thinking of doing a similar thing. Is it acting as an exhaust?

Yes and Yes

Managed to get it before the price hikes.