290P/290X running temp comp

Kaapstad · 19 Feb 2014 at 15:29

LtMatt said:
Good work Kaap. I think highest temp should be at the top though.

EDIT

Maybe you should state Reference Air, or AIB Air etc?

If people state the above I will.

Uncle Petey said:
Kaap, are you running two MO-RA3's on that rig?

Yes

OLDPHART · 19 Feb 2014 at 16:02

Afternoon Kaaps, my Heaven BMRK 4.0 results after 3 runs 4820k:4.6GHz-1.34v SLI 670 Stock > GPU1:1058/3004 / GPU:1084/3004 - Room Temp 21'c.

I don't think Vrm temps is supported with 670's > GPU MAX TEMP:37'C / CPU Core Temps:42'c 35'c 42'c 42'c

Note duting the 3 runs my SLI670's Core Temps fluctuated between 34'c to 37'c.

Custom loop -
PhoBya Rad 560+EK DCP 4.0 Pump (12v) with 4xZaward Golf II Fan 140mm 900rpm ZG2-140D - black
Watercool Heatkiller CPU Block Rev3.0 1366 / 2011 - Black Nickel
EK Water Blocks FC670 GTX GPU Water Block - Acetal+Nickelx2

Note Rad is free standing for better temps, easier maintenance and fitting.

Screenshot -

Cheers,
Oldphart.

Kaapstad · 19 Feb 2014 at 16:20

Table updated.

@LtMatt what kind of air cooling are you using, ref or non ref ?

LtMatt · 19 Feb 2014 at 16:26

Kaapstad said:
Table updated.

@LtMatt what kind of air cooling are you using, ref or non ref ?

Kaap you know im rocking reference cooling.

Kaapstad · 19 Feb 2014 at 16:28

LtMatt said:
Kaap you know im rocking reference cooling.

I also know you are an ace modder, I was not sure if you have enhanced the cooling.

I will put you down as ref air.

It will be nice if we can get a good range of cooling setups which people can use to refer to.

LtMatt · 19 Feb 2014 at 16:30

Kaapstad said:
I also know you are an ace modder, I was not sure if you have enhanced the cooling.

I will put you down as ref air.

Hehe true. I do have a pair of Accelero's that i could put on my cards but when i tried it on my 7950's the cards had no room to breath and (due to using 3 slots each) i got really bad temps so no chance of it working on these.

Kaapstad · 19 Feb 2014 at 16:31

It will be nice if we can get a good range of cooling setups which people can use to refer to.

almighty15 · 19 Feb 2014 at 18:05

Good idea for a thread :cool:

setter · 19 Feb 2014 at 21:34

Stock gigabyte wf gtx 780. (1097mhz boost).

Kaapstad · 20 Feb 2014 at 08:11

Table updated and listed in order of core temp.

LtMatt · 20 Feb 2014 at 08:13

Kaapstad said:
Table updated and listed in order of core temp.

OLDPHART · 20 Feb 2014 at 13:28

It would be nice if members mentioned what they were using for cooling whether stock or custom would be a good idea for GPU and CPU a swell.

Mr. May · 20 Feb 2014 at 21:53

Just gave this a go 3x benchmark runs on ultra 8x AA tess maxed cards at stock using my fan profile

80-77 on refrence cooling sandwiched together in a micro atx with 2 ssds 2 hdds and a 3930k lol

Only just noticed LT matt's is using 100% fan time for a rerun lol

Mr. May · 20 Feb 2014 at 22:52

Re-run @ 100% fan speed

68-61 degrees

Mr. May · 20 Feb 2014 at 23:17

One last time as I missed the under volting part

64-58 degrees

LtMatt · 21 Feb 2014 at 07:52

Mr. May said:
Just gave this a go 3x benchmark runs on ultra 8x AA tess maxed cards at stock using my fan profile

80-77 on refrence cooling sandwiched together in a micro atx with 2 ssds 2 hdds and a 3930k lol

Only just noticed LT matt's is using 100% fan time for a rerun lol

LOL. Damn straight i am Mr May. It was like being at Heathrow. I should run it again to be fair. I did feel like i was cheating with that run. What fan speed were you using? I normally run about 55-60% fan speed. Your temps are really good i have to say. Its a testament to the design of the reference cooler that you can run like that with a lower fan profile and still keep decent temps.

Mr. May said:
One last time as I missed the under volting part

64-58 degrees

Wow you actually got lower temps than mine and you have a 290X vs my 290 Pro's. I'm amazed. :eek:

EDIT

What are the Asics of your cards Mr May?

Kaapstad · 21 Feb 2014 at 07:57

Mr. May said:
One last time as I missed the under volting part

64-58 degrees

And on the table.

LtMatt · 21 Feb 2014 at 08:04

Kaapstad said:
And on the table.

I'm going for another run as i recently changed my h100i from intake to exhaust.

triss · 21 Feb 2014 at 08:09

blower cards do quite well when up and down like his pic

LtMatt · 21 Feb 2014 at 08:22

triss said:
blower cards do quite well when up and down like his pic

One difference i did notice actually. His VDDC in Gpu-z is a constant 1.000v where as mine fluctuates around 1.125v. That could explain the difference, other than that no idea. I wonder if hes using force constant voltage in afterburner?