Watercooled Case Gallery

lokkers · 23 Aug 2004 at 16:58

LRWW poly top, Eheim 1250 pump, 120.2 rad and 2 7volted YS-TECH 120mm fans all inside my beautiful LianLi pc70 case. A happy man I am

skinnyl · 23 Aug 2004 at 18:47

Finally got a semi decent digi camera, so heres the newlyish WC rig!

ill link the rest as they are all quite big.

http://www.mwdata.plus.com/PC/1.jpg
http://www.mwdata.plus.com/PC/2.jpg
http://www.mwdata.plus.com/PC/3.jpg
http://www.mwdata.plus.com/PC/4.jpg
http://www.mwdata.plus.com/PC/5.jpg
http://www.mwdata.plus.com/PC/6.jpg
http://www.mwdata.plus.com/PC/7.jpg
http://www.mwdata.plus.com/PC/8.jpg

Hardware:-

(pc spec in sig)

D-Tek LRWW block

Thermochill 120.2 Rad

4 x 120mm (38mm thick) YS TECH fans

Eheim 1250 pump

Tygon tubing

water (purple ice and blue dye).

abit is reporting temps as 39-40 idle and about 47-48 load. but i got a new temp probe on order as the other broke :S.

worst bit was getting the blow holes for the rad.

Paa` · 23 Aug 2004 at 20:15

Got a similar setup to yours, ive tightened it around 60% so the spring is just over half squashed... should i tighten it more ?..

Only got a really old pic of my setup which was half done a few bits have changed since then ( around 6 month's ago )

bcjames · 27 Aug 2004 at 13:39

My 1st ever water cooled rig. It was, err...interesting, setting it up

Rojin · 7 Sep 2004 at 13:48

Well here's my recent attempt, since killed the 9800XT and have a 6800GT in there now which I'll be fitting the DD block to shortly once I have the time:

Had to do a bit of dremelin' to get the rad into the 5 1\4" bays but nothing to radical. Cut out a slot so I could fit the rad:

Specs:
Abit KV8 Max3
A64 3200+ (@3400+ (220 HTT)) - DD RBX block
9800XT - Silverprop Cyclone (to be replaced with a 6800GT wearing a DD block).
DD4 12v pump
DD Res
120mm fan > BIX rad > 120mm fan

Gregeff · 18 Oct 2004 at 14:40

Here is my updated system:

Cascade CPU block
DD GPU Block
DD Z-Chip Block
Hydor L30
DD 3-1/2" double bay res
2 x 120mm double heater cores!

Thread here

Oo_Scotty_oO · 18 Oct 2004 at 21:12

My piccies can be found here :-

http://www.nforce2.eclipse.co.uk/Rigs/

56k warning , Most pics are 5.0 mega pixels res @ 2mb

Teaser :-

willtec · 29 Dec 2004 at 00:43

This my first water cooling setup a bit of a work in progess

http://myweb.tiscali.co.uk/will25/one.JPG

http://myweb.tiscali.co.uk/will25/two.JPG

surge · 5 Mar 2005 at 20:57

Amazing what you can cram in a PC60..

MikeTimbers said:
C'mon peeps. I know there's been a load of you guys installing Water-Cooling since last year!!!

We need pics!!

OK Mike here's what I managed to cram in a PC60 (well mostly "in"

)

2 fully independent loops

GPU (Maze 4 Block) and NF4 chip (homemade block): Eheim 1048 w/Innovatek Res + Thermochill 92.1 , 2 92 mm Panaflo L1As in push-pull. Hangs off the back of the case

CPU (Nexxxos XP Block): Modded DDC w/Innovatek res + BIP2 with shroud and 2 120mm Panaflo L1As pulling

Modded pump

see

http://forums.procooling.com/vbb/showpost.php?p=136288&postcount=1

for details of mod

Rad + shroud

The whole thing!

One More Solo · 5 Mar 2005 at 21:22

Swiftech MCW6002 block
DD Reservoir
Thermochill 120.1 rad
DD 12V pump (Rev 2)

MikeTimbers · 25 Mar 2005 at 20:22

Just updated. Changed the pump to have gravity help the inlet, put the T so it's straight up. This lot filled and bled in five minutes tops!

Eheim 1250, Little River White Water #095, Nova heatercore, homemade shroud, Titan 120mm

Bonjour · 10 Apr 2005 at 20:30

Few pics of mine. Might post a couple of small vids a little later so you can see the knightlight and the fishies in action.

Bonjour · 11 Apr 2005 at 00:15

Here's some other pics, and a little QT video of the knightlight.

Cashman · 11 Apr 2005 at 18:39

Here is my First watercooling effort...

Sclodion · 12 Apr 2005 at 09:22

My Rig

The Specs:

Athlon64 3500+
1 Gig (2 x 512MB) Corsair PC4400 RAM
Abit AV8 - 3rd eye Motherboard
XFX 6800GT, clocked to Ultra spec
2 x Seagate 200Gig SATA hard drives in RAID 0
NEC Dual layer DVD Burner
Tagan 480W PSU

The Case bits

Lian Li V1000
Water cooling by Innovatek
2 x 120mm Papst fans
Nexus Fan speed controller & CCFL control
Homemade dual temp guage (one for ambient temp, one for water temp)
Shuttle Silver Card reader

OK, so its four images rather than 3, sorry

DELETED_17471 · 13 Apr 2005 at 15:35

here's my current water setup

MikeHowett · 22 Apr 2005 at 20:01

Here it is, finally finished!

One More Solo · 20 May 2005 at 21:32

Cashman · 19 Jun 2005 at 11:28

Hey guys...

I have a new setup...

I still have a lot of things I plan to do to it yet but this is how it is now.

I still have a 120.3 Performance shroud on its way, some EP exclusive fan grills. A little more colour planning still to be done.

Then I will tidy up the cabling, add another fan controller to the Floppy drive bay and install a fan covering the Ram and PWM IC on the DFI SLI-DR.

What are you opinions so far?

http://img87.echo.cx/img87/9887/dscf11702od.th.jpg

janesssssy · 19 Jun 2005 at 11:58

been working for about two weeks now.

A64 RBX block
DD4 12v pump
Tygon 1/2 tubing
Maze4 acetel lowprofile GPU block
Dangerden fill port (T Piece)
thermochill 92.1 radiator with 1x 92mm fan sucking

such a cramp in this case (PC65) now i cant get the side window on.

give it a month or so and i will upgrade to a 120.3 . as the 92.1 cant cope now.

EDIT - shouldnt of posted this eslewhere, before anyone askes i will delete my other threads with these pics.