3D Prints Gallery

Joe Jones · 28 Aug 2023 at 18:37

Now to print a printer printing a printer printing a printer.....

]MadBoy[ · 28 Aug 2023 at 18:45

bulb66 said:
Another stunning model by Chelsey Kearney this time Kong available https://thangs.com/ I had already printed Godzilla by Garrett Kearney (ChaosCoreTech). Printed at 50% scale on my Klipperized Prusa MK2.5S at 0.15 layer height & in FILOALFA Grafylon PLA.

Potato phone camera pictures.

https://i.~ibb.co~/3CYQqmS/dav.jpg
https://i.~ibb.co~/tLT3yHr/dav.jpg
https://i.~ibb.co~/DDbmthg/dav.jpg

this filament is nice!

[HB]Rugrat · 7 Sep 2023 at 16:11

I got an elegoo mars 3 Pro for my birthday last week and decided to decorate the inside of my PC with stuff from my favourite games over the years (and decided to make some of them a bit cryptic). Painting is a LOT harder than it looks...

https://i.~ibb.co~/vL3mxrR/20230906-194840.jpg

wafflecart · 6 Oct 2023 at 13:13

New model I designed with fake wood texture:

Diggsy · 7 Oct 2023 at 13:49

wafflecart said:
New model I designed with fake wood texture:

Was that entirely printed on your Prusa? Looks good

wafflecart · 7 Oct 2023 at 23:38

Diggsy said:
Was that entirely printed on your Prusa? Looks good

Yea came out real good, I did three colour changes on it.

Diggsy · 7 Oct 2023 at 23:43

wafflecart said:
Yea came out real good, I did three colour changes on it.

It’s excellent! Didn’t realise that sort of thing was possible….must look into them more!

ElliorR · 19 Oct 2023 at 20:43

VeNT · 19 Oct 2023 at 23:42

Diggsy said:
It’s excellent! Didn’t realise that sort of thing was possible….must look into them more!

you _can_ do it on any printer. it's just automated on some.
that print looks quite easy to pull off, mostly the base colour, then the darker brown for a few layers then the orange.

Diggsy · 20 Oct 2023 at 18:09

VeNT said:
you _can_ do it on any printer. it's just automated on some.
that print looks quite easy to pull off, mostly the base colour, then the darker brown for a few layers then the orange.

I really need to do a lot more research on 3D printing. Didn’t know any of these things were possible to be honest. Clearly I’m well behind the times…

VeNT · 20 Oct 2023 at 18:56

Diggsy said:
I really need to do a lot more research on 3D printing. Didn’t know any of these things were possible to be honest. Clearly I’m well behind the times…

if you're using prusaslicer -

smack that, it'll tell your printer to start doing a filament swap.
you'll need to be there to do the swap like you would with any other change, but it'll then resume.

Diggsy · 20 Oct 2023 at 19:07

VeNT said:
if you're using prusaslicer -

smack that, it'll tell your printer to start doing a filament swap.
you'll need to be there to do the swap like you would with any other change, but it'll then resume.

Fab, thank you! Definitely have to get myself on the 3D printing train!

VeNT · 20 Oct 2023 at 23:01

Diggsy said:
Fab, thank you! Definitely have to get myself on the 3D printing train!

choo choo

wafflecart · 20 Nov 2023 at 15:42

My first print in place model I designed, a lot of trial and error to get it right!

Trig · 20 Nov 2023 at 16:42

Print in place with a colour change, nice..

VeNT · 20 Nov 2023 at 21:43

wafflecart said:
My first print in place model I designed, a lot of trial and error to get it right!

link it!

I had a failed print again, going to do the rest tomorrow and see if I can glue it.

wafflecart · 21 Nov 2023 at 01:29

VeNT said:
link it!

Here it is: https://www.printables.com/model/643519-print-in-place-checklist-to-do-board-insert-your-p

gitbags · 6 Dec 2023 at 22:36

First attempt at a painted bust.

P1S 0.12mm

RevBillyG · 7 Dec 2023 at 08:01

That's nice and neatly done. Great job

gitbags · 7 Dec 2023 at 10:11

RevBillyG said:
That's nice and neatly done. Great job

Cheers. It came out miles better than I expected considering I did it with a cheap set of paint pens and brushes.
Helps that the P1 prints so cleanly.