700D carbon fibre build: Blackbox II

thanks for reading my man.
funny you should say that, i have a thread going in the cpu section atm, I Did hit 5ghz stable but at fairly high volts so ive chickened out and left it at 4.5 ghz:)
 
Update in a bit.

Second GTX 470 going in with LED lighting system of course:)
Just awaiting new block (RMA) from ek...

Blue primochill LRT Pro tubing and Blue UV mayhems pre-mix coolant

I think it will look pretty fly after this...watch this space
 
next gen:
P1020631.jpg


Close up of the EK SLI link bridge, nicer in person than I thought:
P1020629.jpg


yes both plexi blocks will be illuminated out of phase with each other by slowly pulsating white LEDs
 
after being dormant for nearly three months, i'm up and running again:)

So nice to be off the laptop!
P1020639.jpg


pleased with results, just need to install the rest of the white cathodes properly and put the 30cm UV one back in...
 
ok so the res-->pump tube is slightly kinked though patent and at 60% pump speed does not seem to be impacting performance.

seems its too much for the LRT tubing.

any recommendations? if its 45 degree fittings how should I arrange it? so they are both angling toward each other to reduced turn radius?

I know what you mean re: old setup it did have a nice glow but it was time for a change, the new tubing looks really smart in person.

yeh the lights pulse very subtly I honestly don't know if the cam will pick it up but i'll try

sorted the kink with an EK rotary £3.50 on ocuk
was wary of rotaries but LOVE this one now! it's dead nice:
P1020646.jpg


gutted with the UV properties of primochill LRT PRO, it just goes solid purple on the outside. Same with the EK UV fluid it doesn't glow at all!
will be on masterkleer next I think

Lights video:)
http://www.youtube.com/watch?v=75FDolDDG5c&feature=youtu.be
 
Last edited:
Thanks guys,

The 470s you see there are now in GPU heaven, the 680s aren't under water but have been considering it...

 
Last edited:
2020 The system looks like this!

Stayed with LED strips behind the Mobo, this time cablemods RGB wide beam.

Also have RGB on the EK waterblock but set it to white for this photo to match the CPU and Reservoir.

NB RGB E-loops

Phanteks cable extensions
uc
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom