A8R32-MVP what is it

wow Raja, thats a nice score!

I havent checked my scores while overclocked due to the fact I am not sure how to overclock my ram yet..My best overclock stable was at 2.8ish.. however I booted over 3gig to windows (not stable) It might have stabled out but I needed more volts and was afraid to go higher than 1.55

I mean I havent checked my scores in 05.. I just installed it today and am currently not oc`ed
 
Last edited:
Alabno said:
Ok now i adjusted my signature to make One big Paragraph and still within 500 characters.
Click to expand...
From the FAQ

You may use a signature (commonly used in email messages) in your posts. You can specify in your profile a signature to use at the bottom of your posts. When you post, there is an option to use your signature. A signature may contain one or more images but they must fit within a box with maximum dimensions of 400 x 75 pixels (width x height) and with a maximum (combined) file size of 20k. Images containing mostly very large words or animated .gifs will not be permitted. You may also add 1 consecutive lines of normal or smaller text directly above or underneath the image with no spaces inbetween image and text. If no images are used then up to 4 consecutive lines of normal or smaller text is permitted. Do not pad out your text lines with blanks lines. A line of text is defined as having a maximum length of 400 pixels. If you want to turn the signature off in the future, you can come back and edit your post. If you have specified a signature in your profile, the box will be automatically ticked for you.
 
Coolasmoo said:
Hey guys,

Just set up,


Ran the CCC at defaults except put Sliders on performance

7200 in 06

Does that seem abit low to you guys with an FX55

:confused:
Click to expand...

thats 1100 more than i get with a single x1900xtx

does seem a bit low for the cash outlay :D
 
Coolasmoo said:
Hey guys,

Just set up,


Ran the CCC at defaults except put Sliders on performance

7200 in 06

Does that seem abit low to you guys with an FX55

:confused:
Click to expand...

Seems low....I am sure you know this but afer you set the sliders to low in CCC, be sure to tick the application controlled as 3dmark06 will shut off any of the goodies, without the tick, it will just run lowest settings instead of turning them off
 
lordedmond said:
From the FAQ

You may use a signature (commonly used in email messages) in your posts. You can specify in your profile a signature to use at the bottom of your posts. When you post, there is an option to use your signature. A signature may contain one or more images but they must fit within a box with maximum dimensions of 400 x 75 pixels (width x height) and with a maximum (combined) file size of 20k. Images containing mostly very large words or animated .gifs will not be permitted. You may also add 1 consecutive lines of normal or smaller text directly above or underneath the image with no spaces inbetween image and text. If no images are used then up to 4 consecutive lines of normal or smaller text is permitted. Do not pad out your text lines with blanks lines. A line of text is defined as having a maximum length of 400 pixels. If you want to turn the signature off in the future, you can come back and edit your post. If you have specified a signature in your profile, the box will be automatically ticked for you.
Click to expand...


Ok i did 4 lines now, but this sucks as i hate posting 50 times to tell other what speeds, volts I am at and drivers.

These Admin's need to adjust this for the forum, as it allows you to use up to 500 characters when making the signature. If we can't do so then they should limit the character limit.
 
raja said:
HI,

I have 1900xtx and 1900 master in xfire, can get just over 15000 in 3d mark 05 with my system oc'ed.

managed 2.7ghz 10X multiplier, 3-3-3-8 @1T, 800mhz htlink with this board today, my new one should arrive tommorow, will see if it's any better than this one.

Raja
Click to expand...


That is a pretty good score Raja.
 
Coolasmoo said:
13063

in 05

Is there anything in the bios i have to change.

not overclocking at the moment
Click to expand...

What CPU you running?


Edit: opps I just read you sig again FX55

Well in that case..... I am not sure as buddy above has a X2 4800+ no OCing and gets higher score then you in 2005.
 
hi,

15,291 with cpu @ 2.7ghz.

coolasmoo, make sure you enable crossfire in the catalyst menu, also set AI to standard, turn off adaptive aa, and set mimap detail level to low aa and af settings to application controlled. If you have already done this then sorry.



Remember 06 utilises dual cores, I can get around 8300 quite easily, and I don't think that was oc'ed (can't quite recall).

Raja
 
raja said:
hi,

15,291 with cpu @ 2.7ghz.

coolasmoo, make sure you enable crossfire in the catalyst menu, also set AI to standard, turn off adaptive aa, and set mimap detail level to low aa and af settings to application controlled. If you have already done this then sorry.



Remember 06 utilises dual cores, I can get around 8300 quite easily, and I don't think that was oc'ed (can't quite recall).

Raja
Click to expand...

Where is the setting for crossfire mode exactly in the CCC?
 
Coolasmoo said:
Thanks raja, i did have them set already.

I will try some things later,

Otherwise tomorrow ive got time for a format >c if necassary
Click to expand...


I maybe doing a format C: myself soon.

I just did another 3dmark 05 and scored only 11138
This is a 250+ drop in score within 4 days.

I did nothing different or install anything new that could have affected this much of a drop.

I also defrag quite often like everyday sometimes.

Weird huh?
 
Last edited:
Alabno said:
Where is the setting for crossfire mode exactly in the CCC?
Click to expand...


set the display of catalyst to advanced then on the left tree menu it's the last item, it may not display the option if you don't have 2 cards though......
 
You must log in or register to reply here.
Back
Top Bottom