About to start first build, few questions

Your psu is fine, as others have said its hard to find out whats wrong without a photo.

And yeah thanks for that correction - wouldnt want the motherboard being ripped out of the case!
 
2w2phee.jpg

1jowav.jpg

2hoxydk.jpg

vqrx5c.jpg

x3hki8.jpg

2m5c852.jpg
 
Its in the right header, two concerns though
SYS_FAN plug does not fit in or clip like every other slot, and the only reason im using that plug in the sys_fan is becuase everyother plug was used and it was the only 4pin plug i had left, plus the wire has connectors on for fans to fit onto.
SECONDLY,
the 8 pin power shapes of the plug, do not match those to which im plugging them in to, but it slides in ok
 
Corsair PSU's and some others too i'd guess have 4 of the pins match but then have 4 shaved plugs on the other 4 connectors so they fit on all motherboard shapes and designs for 8 pin ATX12v motherboard connections, as long as you're sure it's the right plug that part should be fine at least
 
No fans, just the BLUE led on the front of the case
no other pins that match
will try to start it
if it doesnt work will remove GPU then try
 
Well done... just don't be in too much of a hurry to start overclocking it now, will you! ;)

Best just to let everything 'settle down' a bit first.
 
Back
Top Bottom