-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
AMD Catalyst 13.3 BETA 2
- Thread starter Proto
- Start date
constant atioglxx.dll errors and inability to run anything opengl, same here on my windows 7 64 bit
making my Logitech gaming software ver 8.40.83 g510 keyboard stop working & other things
uninstalled them now & now back to 13.1 & now get opencl bug detected when opening GPUZ
making my Logitech gaming software ver 8.40.83 g510 keyboard stop working & other things
uninstalled them now & now back to 13.1 & now get opencl bug detected when opening GPUZ
Last edited:
Make sure you report that to Thracks - http://www.overclock.net/u/294166/thracks & http://www.amd.com/report
Seeing a few mentions of this now. I have to admit my logitech gaming software app has started crashing but i fixed it by putting the file below in the logitech program files folder.
If you want to continue to use 13.2 Beta 2 i have a fix for you. Stick this file in the relevant OpenGL game/app main folder. Its the OpenGL file from the previous beta driver 7. This will be fixed in the next Beta due soon id imagine providing it gets reported.
http://www.mediafire.com/?0t2atow116wngg3
I have some pretty stratospheric increases on Far Cry 3 in CFX Ultra mode (1080p) but I am not convinced it is stable.
The Beta 7 driver was awful in FC3 but it was stable.
im sitting on a pair of 7950 in crossfire and have switched to these new drivers, so fare an improvement but ive only tested Tomb Raider, though its much better now than before. Next will be crysis 3 and BF3
EDIT: Played a bit of Crysis 3 and BF3 and both games works like a charm. Ive had serious issues with Crysis 3 and stuttering/low fps in certain areas but that seems to be gone now. BF3 is still working like a charm. Next up is Far Cry 3
EDIT2: FarCry 3 is a mess for me. Crossfire doesn't seem to kick in properly as I only have 5ish more frames in fullscreen versus Window mode. Also Weird drops all over the place and stuttering. This is at maximum settings except AA which is off. Though same fps with it on at 4x.
EDIT3: Fluidmark seems to crash all over the place.
EDIT: Played a bit of Crysis 3 and BF3 and both games works like a charm. Ive had serious issues with Crysis 3 and stuttering/low fps in certain areas but that seems to be gone now. BF3 is still working like a charm. Next up is Far Cry 3
EDIT2: FarCry 3 is a mess for me. Crossfire doesn't seem to kick in properly as I only have 5ish more frames in fullscreen versus Window mode. Also Weird drops all over the place and stuttering. This is at maximum settings except AA which is off. Though same fps with it on at 4x.
EDIT3: Fluidmark seems to crash all over the place.
Last edited:
^+^^
Thanks for the info.
Pre-13.3 beta2, I haven't been able to use 3D in CrossFire in FC3 since the 1.3 ubi update due to a 'checkerboard' effect bug, used to think it was an AMD fault until I uninstalled/re-installed with the 1.2 update to find it's an ubi fault, pity as I was enjoying it up till then.
Fingers crossed for this driver but I'm not holding my breath as it's an engine issue not a driver one.
Installed this driver last night but never got the chance to try, if I don't fall asleep tonight(too many late ones) then a bit of testing for me.
Thanks for the info.
Pre-13.3 beta2, I haven't been able to use 3D in CrossFire in FC3 since the 1.3 ubi update due to a 'checkerboard' effect bug, used to think it was an AMD fault until I uninstalled/re-installed with the 1.2 update to find it's an ubi fault, pity as I was enjoying it up till then.
Fingers crossed for this driver but I'm not holding my breath as it's an engine issue not a driver one.
Installed this driver last night but never got the chance to try, if I don't fall asleep tonight(too many late ones) then a bit of testing for me.
Came here to ask this very question....
Soldato
- Joined
- 28 May 2007
- Posts
- 10,222
Amd said not to use the 12.11 caps as newer caps were in the 13.2 betas so i guess the same goes for all drivers until amd say otherwise.
http://forums.videocardz.com/topic/332-amd-catalyst-132-beta-3/
At the bottom thracks says
"New CAP embedded in driver. Do not use 12.11CAP2."
http://forums.videocardz.com/topic/332-amd-catalyst-132-beta-3/
At the bottom thracks says
"New CAP embedded in driver. Do not use 12.11CAP2."
Anyone heard of a new driver raising your temps massively? reason i ask mines been jumping from 35C-40C upto 60c, i only noticed because my fans were on overdrive!
i disabled my other monitor but the same! i have gone back to the 13.2 B6 to see if that helps, it maybe something alse as i have had a few errors lately,hope its not hardware.
i disabled my other monitor but the same! i have gone back to the 13.2 B6 to see if that helps, it maybe something alse as i have had a few errors lately,hope its not hardware.
Are you sure its not the new beta 7 of afterburner? I noticed this version has increased temps a bit, voltage notch is one higher + vroop is less = slightly warmer temps. Check you haven't got force constant voltage on in afterburner as well. I had it on myself a few days back after i accidentally clicked it and didn't realise. I wondered my why idle temps went up 10c.
Also check fan speed settings in afterburner, maybe its running slower than normal.Had to go back to Beta7 of the 13.2 drivers, these ones stopped my voltage control working so i was stuck at full power all the time, tried removing all overclocking programs with no luck, reverted back to beta 7 and it instantly fixed it.
You sure you didn't have force constant voltage ticked in afterburner?