Caporegime
- Joined
- 18 Sep 2009
- Posts
- 30,292
- Location
- Dormanstown.
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
AMD R9 290 (Non-X, Pro, etc) Owners Club
- Thread starter Orangey
- Start date
Caporegime
- Joined
- 18 Sep 2009
- Posts
- 30,292
- Location
- Dormanstown.
And only you 
.
I read it as Vram.
.I read it as Vram.
That couldn't of happened petey, we must have both got the wrong end of the stick.
Spoken with self righteous pomposity....
oh wait a minute, it wasn't you, there was me attempting some fine tune the air his bicycle tyres again.
A few us could smell the hypocrisy from 50 miles away.
Spoken with self righteous pomposity....
oh wait a minute, it wasn't you
, there was me attempting some fine tune the air his bicycle tyres again.
Caporegime
- Joined
- 17 Oct 2006
- Posts
- 25,703
tommybhoy, stop the baiting. It's frowned upon at best of times and trying it with someone from the moderating staff is not recommended.
lol
This cold weather is working a treat for my Radeon. I can have 75mV on it now and keep the same temperatures as I could with 50mV when it was hot. Higher 24/7 clocks! Running at 1175/1550 at the mo. Don't get any crashes in anything other than BF4.
This cold weather is working a treat for my Radeon. I can have 75mV on it now and keep the same temperatures as I could with 50mV when it was hot. Higher 24/7 clocks! Running at 1175/1550 at the mo. Don't get any crashes in anything other than BF4.
Some have found that a side fan works wonders for Hawaii, not sure if it applies to your Tri-X though. Do you fiddle with the aux (PLL) volts?
Have a side fan.
Haven't changed the aux volts. It's not the temperature which it runs at which bothers me, it's the heat it chucks out the case (via my exhaust fans) which gets me.
It's a game issue i expect knowing BF4. Does it happen under DX Rusty? Have you checked to see if you're suffering from the dram leak? Ctrl Alt Del next time and check dram usage after you've been playing for 30 mins. Waiting on the next patch for BF4 here myself.
I have had memory leaks on it but have had them and it run happily along using about 50% of my available memory
.It sometimes crashes after 10 minutes, sometimes after an hour. At stock and while OC'd. I still haven't tried DX because well... I forget to
.
You should have bought the Powercolor PCS+, i'm running +75mv on the original cooler, even in the hot weather. It never crashes.
You should have bought the Powercolor PCS+, i'm running +75mv on the original cooler, even in the hot weather. It never crashes.
I shouldn't because it's got peasant RAM on it.
It's not crashing because of the graphics card individually it's crashing due to a combination of either a memory leak and Mantle or something else which I haven't been able to pin down.
I could run 100mV on it if I wanted to in hot weather - I wasn't hard limited to 50mV I just chose to run lower voltage because my room was becoming unbearably hot with the card going.
oh... pfft @#+?£% my peasant vRam still runs at 1550Mhz, noth'n wrong with that
I also use Mantle, and never crash. maybe my vRam isn't all that bad
oh... pfft @#+?£% my peasant vRam still runs at 1550Mhz, noth'n wrong with that
I also use Mantle, and never crash. maybe my vRam isn't all that bad
Good for you. I have god awful luck with AMD cards so I would have ended up with one that black screened as soon as you touch the mem frequency
hence going for the Sapphire. Plus I prefer the look of the Sapphire but they're both great cards.It could be anything really. I've tried loads of things and to be honest it's probably some issue with something in the way I run games (i.e. 120 Hz etc etc) and Mantle and the drivers and the game.
I say this because 14.7 first driver was god awful. Would be lucky to make it 30 mins without crashing in BF4. With the RC3 one things improved dramatically but still not perfect so it's obviously something to do with the drivers even if not the drivers exclusively.
Good for you. I have god awful luck with AMD cards so I would have ended up with one that black screened as soon as you touch the mem frequency
It could be anything really. I've tried loads of things and to be honest it's probably some issue with something in the way I run games (i.e. 120 Hz etc etc) and Mantle and the drivers and the game.
I say this because 14.7 first driver was god awful. Would be lucky to make it 30 mins without crashing in BF4. With the RC3 one things improved dramatically but still not perfect so it's obviously something to do with the drivers even if not the drivers exclusively.
When you say crash what exactly is happening and what does the System error dump say? Bluescreenview might tell you. http://download.cnet.com/BlueScreenView/3000-2094_4-10965136.html
Soldato
- Joined
- 25 Nov 2011
- Posts
- 20,675
- Location
- The KOP
BF4 crashing is across the board. Both AMD and Nvidia users are getting poor performance and crashing.
Battlelog is full of it.
CTE is from what I read running great, nice performance and crash free. If you have good internet speed and space give that ago. or wait for Patch in September.
Battlelog is full of it.
CTE is from what I read running great, nice performance and crash free. If you have good internet speed and space give that ago. or wait for Patch in September.
It's just BF4 not the whole PC. PC is completely fine. I can load straight back into the game after a crash.
Just a standard BF4 has stopped responding error... In game the game freezes then crashes. There's no visual artifacts at all in game. It runs perfectly up until the crash.
Just a standard BF4 has stopped responding error... In game the game freezes then crashes. There's no visual artifacts at all in game. It runs perfectly up until the crash.