** AOC Q2770PQU Owners Thread **

Barkeley said:
Curious. Coming back from the screen sleeping mode (from my computer, not the OSD) I often end up with a 800X600 res and there is no other way to come back to the standard res without switching off/on the monitor.
I had not that with my previous 24" monitor, any idea ?
Click to expand...

Are you using display port ?
 
Barkeley said:
Curious. Coming back from the screen sleeping mode (from my computer, not the OSD) I often end up with a 800X600 res and there is no other way to come back to the standard res without switching off/on the monitor.
I had not that with my previous 24" monitor, any idea ?
Click to expand...

I am getting a similar thing only my screen doesn't come back on.

MOOGLEYS said:
Are you using display port ?
Click to expand...

I am using DP
 
My problem is my 7970's only have 2 of the Display Ports on the card. There is only one DVI and one HDMI.

Any suggestions?
 
Just had one of these delivered for the wife's PC and have to say it is superb!

I am sitting in front of the Q2770PQU at the moment and cannot fault it in any way. It has no dead pixels, no back light bleed and the screen uniformity is perfect to my eye.

The only little niggle is the white balance is on the warm side giving a noticeable yellow tinge to whites.

I will be calibrating the screen with my i1 Display Pro so that should not be an issue going forward.

To sum up a great screen at a great price.
 
Last edited:
ramdrive said:
Just had one of these delivered for the wife's PC and have to say it is superb!

I am sitting in front of the Q2770PQU at the moment and cannot fault it in any way. It has no dead pixels, no back light bleed and the screen uniformity is perfect to my eye.

The only little niggle is the white balance is on the warm side giving a noticeable yellow tinge to whites.

I will be calibrating the screen with my i1 Display Pro so that should not be an issue going forward.

To sum up a great screen at a great price.
Click to expand...

Did you install the driver from the disc, if you did just remove that profile.
I had the very same issue.
 
Had this monitor a few days now, and so far its great! Input lag is really low, no ghosting whatsoever.

CE5Ny7X.jpg


Ive not messed around with the settings yet, just lowered the brightness to 50. Can anyone recommend me any options i could tweak or just leave as is?
 
Last edited:
On mine I left all settings at default and just dropped the brightness and that gave an excellent picture.

If you want the best image possible calibrate the screen with an x-rite calibrator, it makes a big difference. Out of the box I found my screen a little on the warm side, a slight yellow tint to white and light grays so would have added a little blue to counter this if I did not have the x-rite.

Also note each individual screen will behave slightly differently so using other users settings probably will not benefit you.
 
Last edited:
Would just like to check if everyone has the same firmware revision.

Monitor
Model name................. Q2770
Manufacturer............... AOC
Plug and Play ID........... AOC2770
Manufacture date......... 2013, ISO week 49
Filter driver................. None
-------------------------
EDID revision................ 1.3
Input signal type........... Digital
Color bit depth.............. Undefined
Display type................. RGB color
Screen size.................. 600 x 340 mm (27.2 in)
Power management....... Active off/sleep
Extension blocs............ None
-------------------------
DDC/CI....................... Supported
MCCS revison.............. 2.1
Display technology....... TFT
Controller................... Mstar 0x1600
Firmware revision.......... 0.4
Active power on time.... Not supported
Power consumption....... Not supported
Current frequency........ 67.50kHz, 60.00Hz

Checked with Monitor Asset Manager

http://www.entechtaiwan.com/util/moninfo.shtm
 
Last edited:
Code: 
Monitor
  Model name............... Q2770
  Manufacturer............. AOC
  Plug and Play ID......... AOC2770
  Manufacture date......... 2013, ISO week 45
  Filter driver............ None
  -------------------------
  EDID revision............ 1.3
  Input signal type........ Digital
  Color bit depth.......... Undefined
  Display type............. RGB color
  Screen size.............. 600 x 340 mm (27.2 in)
  Power management......... Active off/sleep
  Extension blocs.......... None
  -------------------------
  DDC/CI................... Supported
  MCCS revison............. 2.1
  Display technology....... TFT
  Controller............... Mstar 0x1600
  Firmware revision........ 0.3
  Active power on time..... Not supported
  Power consumption........ Not supported
  Current frequency........ 88.90kHz, 60.03Hz
 
Monitor
Model name.................. Q2770
Manufacturer................ AOC
Plug and Play ID............ AOC2770
Serial number................ FSUE1HA002720
Manufacture date.......... 2014, ISO week 4
Filter driver................... None
-------------------------
EDID revision................ 1.4
Input signal type........... Digital (DisplayPort)
Color bit depth.............. 8 bits per primary color
Color encoding formats... RGB 4:4:4, YCrCb 4:4:4, YCrCb 4:2:2
Screen size.................. 600 x 340 mm (27.2 in)
Power management....... Active off/sleep
Extension blocs............. 1 (CEA-EXT)
-------------------------
DDC/CI........................ Supported
MCCS revison................ 2.1
Display technology......... TFT
Controller..................... Mstar 0x1600
Firmware revision........... 0.4
Active power on time...... Not supported
Power consumption......... Not supported
Current frequency.......... 88.90kHz, 60.03Hz
 
I've discovered on problem with this monitor. When I want to see who posted last in a thread on the OcUK forums, by the time I've scanned across to the right side of the display, I'm usually looking at the wrong line :D
 
You must log in or register to reply here.
Back
Top Bottom