Build log of "Unobtainable" - X79 in a white Bitfenix Prodigy

Hi guys..

So It have been a bit quiet from me lately, but I have had an exam I also had to study for..

First off:
You remeber the all of a sudden leaking from the flowmeter?
Well it seemed to be the o-ring sitting badly, so tried fixing it but no luck.
So it goes out of the system (didn't need it any way) which might just make the whole build look a bit better and less caotic :)

But the leak did bring me some troubles..
MY pump didn't start after so was a bit mad at the time :mad:
But out the pump goes and with a bit of time on the hot radiator fixed it (it had taken some water in) :D

So I said I would enter the Cooledpc.com competion but in the highst catagori, so I need to take away the two motherboard blocks and reservoir.
So empty the build and now when I had it all out, I just need to change the fan on the PSU.

WHY?
Well, it is a nice PSU, but in idle, it's fan was the most noise part, which I just can't take.
So out with that and in with a noctua P14 - FLX which is really good = no noise but better airflow.
1000

1000

Really love the noctua fans, but can't use them in general because of those damn colors..

But the res, mobo blocks and flow meter came out, and the loop changed a bit and it all turned out really great (I believe :cool:).
Many great pictures can be seen here:
http://www.cooledpc.com/build/224

Hope you like it and will share and vote ;)

Next in the coming week, I will be shifting back the res and mobo blocks to finally finish the build and show you some temp, bench and OC :D
 
Hi Guys, Im sorry that I have been away a longer time but my studies have really been pulling my hairs :-(

Any way, Bench and such, well it turns out that the motherboard can't really OC.
Been ad it for some time now but, when I try to set a higher multiplier in the old BIOS it doens't really take any effect, or sometimes a complete other setting. Along that the power isn't working that well a all either, so won't try to do more in case the motherboard fries it self along some other HW.

I can tough tell you that, for some reason I not sure of, the front fan can't spin more then around 700 rpm of its 900 when it's inside the case (have tried two fans now). outside its around the 900, and nothing is hitting it inside the case.
Could it be some magnetic interference from the cables or motherboard?

So it doesn't perform that well :-( but with all fan at max (is a bit noisy) I get a CPU core temps around 50-54 and GPU at 44-46 when I make some long Prime 95 and along some unique heaven. (though the GPU's only opperate at 70-80% when Prime 95 also is running).. And the water is around 42 degrees when it's stable

About the Bench, well it would be any thing you havent seen since I cant OC the CPU :-(

MrAnthony said:
My word, it's crazy what you can do with such a small space!

Great build, absolutely love it.
Click to expand...

Thanks guys, well you should look forward to my next build that will have the same power but in a even smaller case ;-)

MarkJr said:
Nice build man! If you would sell this how much would you sell it for?
Click to expand...

Well it is been sold though my friends firm to give me money for the next build.
How much I not sure of yet but it around 4200 euros
(there is HW and such for more than 3600 euros)

coolamasta said:
Loving that a lot mate, I have a black Prodigy I am planning to mod and watercool over the winter so nice to see one done so well :D
Click to expand...

Thanks, well looking forward to see ours :)
 
Have you tried the custom bios for it? I read about the board when you first posted the log and someone had the same trouble and made a custom bios for it, il try and find.
 
DotA said:
Have you tried the custom bios for it? I read about the board when you first posted the log and someone had the same trouble and made a custom bios for it, il try and find.
Click to expand...

Custom Bios? could you find it I would be happy..
As long as it doesn't blow my HW :D

fizban1980 said:
amazing build
Click to expand...

kthula666 said:
That is a tasty looking build very nice detail.
Click to expand...

Thanks guys...
And just wait for my next build which will be more powerfull in an even smaller case :eek:
 
Not a bad looks pretty tasty!

You might want to check out this video the guy is doing the same sort of build you did but I thought you might be able to get some ideas from it (he's using the same water pump you are and a similar reservoir).


I really love the way he's used Bitspower Crystal links for the tubing.
 
Probably best build I have ever seen. Looks amazing, and you are one skilled guy to put that together. I struggle in a XL-ATX Case never mind a ITX lol.
 
Freddie1980 said:
Not a bad looks pretty tasty!

You might want to check out this video the guy is doing the same sort of build you did but I thought you might be able to get some ideas from it (he's using the same water pump you are and a similar reservoir).


I really love the way he's used Bitspower Crystal links for the tubing.
Click to expand...

I follow all his builds, really really good. As is OP's. Well done!
 
Thanks all :D

BS Dave said:
Could you use the 5.25 bay with the big 200mm rad??
Click to expand...

Possible, you would have to do some modding to get it working :cool:

kitkat9933 said:
Probably best build I have ever seen. Looks amazing, and you are one skilled guy to put that together. I struggle in a XL-ATX Case never mind a ITX lol.
Click to expand...

Thanks, My next build will be in a smaller case, but might not as compact..
Time will only tell :eek:

Freddie1980 said:
Not a bad looks pretty tasty!

You might want to check out this video the guy is doing the same sort of build you did but I thought you might be able to get some ideas from it (he's using the same water pump you are and a similar reservoir).


I really love the way he's used Bitspower Crystal links for the tubing.
Click to expand...

Yes it is a nice clean build ;)
 
You must log in or register to reply here.
Back
Top Bottom