Hanns-G HW191D Thread (Now £107.95 @ OcUK)

I recieved my hanns G widescreen today, connected up via DVI-D cable, and i must say it looks mint.
im hurting my neck lookin left to right....lol

EDIT, and there's no dead pixels
 
Last edited:
I like the Hanns-G HW191D 19" Widescreen LCD Monitor and the price looks a right bargain. But I am wondering if my VGA card will be able to run the screen resolution of 1440 x 900

its an ATi 256Mb X850XT Card :confused:

PS I haven't read all the previous pages, so I apologise if its already been posted ;)
 
Depends what you want to run. It'll run 2d stuff at 1440x900 just fine as will almost every graphics card made in the last 5 years or so i believe but games will of course get slower as there are more pixels to render.
I have a 6800gt which is about the same era as the X850 and i was pleasantly supprised to find it runs bf2 at a higher resolution without any problems, i initially thought it would struggle.
 
If you currently run at 1280x1024 then it should run better on the 19" widescreen.

1280*1024 = 1 310 720
1440*900 = 1 296 000

Less pixels to render
 
mark1 said:
If you currently run at 1280x1024 then it should run better on the 19" widescreen.

1280*1024 = 1 310 720
1440*900 = 1 296 000

Less pixels to render
Click to expand...

What is the next resolution down from 1440*900 you can run at on the Hanns out of interested (retaining the the 16:10 aspect ration)?
 
The next 16:10 resolution down is 1280x800, as I don't have one of these monitors I can't confirm whether is works or how good it will scale. It should work as long as your graphics card can output the resolution, but like I said I don't know how good it will look due to scaling.
 
Last edited:
Mines just arrived, and thankfully no dead pixies. I felt the built quality wasn't all that, but I can't complain for the price. The screen itself is very nice and vibrant. I haven't tried VGA yet, but can say that DVI is crisp and sharp as expected.

My desk is a right state now as I''ve not tidyied it up yet. Going to order a second screen later tonight to replace my existing 17" tft.

Hanns_S.jpg

Another pic

20.1" Belinea on the left (for 360)
19" Haans Gruber Widescreen
and Sharp 17" TFT on the right
 
Last edited:
Kami said:
Why do you need so many monitors I thought you were gettiing rid of one! ;)
Click to expand...
Dual screens for the pc (dual 19" widescreens anyway) and one 20.1" for ze 360! Bigger is BETTER! I'm sure you've been told that :p

P.S Anyone posts a 24" dell on here gets the curse of anelli (privates eaten by a daoc badger when they sleep)
 
Kainz said:
Dual screens for the pc (dual 19" widescreens anyway) and one 20.1" for ze 360! Bigger is BETTER! I'm sure you've been told that :p

P.S Anyone posts a 24" dell on here gets the curse of anelli (privates eaten by a daoc badger when they sleep)
Click to expand...

can u notice much of a difference playing with the xbox on a 19" and on a 20.1" ?
 
whatever said:
can u notice much of a difference playing with the xbox on a 19" and on a 20.1" ?
Click to expand...
Not really mate no. The only difference is that the 19" is more brighter but it wasn't configured for the 360. I just plugged it in just to see if there was a clarity/sharpness difference, there wasn't one.
 
Kainz said:
Not really mate no. The only difference is that the 19" is more brighter but it wasn't configured for the 360. I just plugged it in just to see if there was a clarity/sharpness difference, there wasn't one.
Click to expand...

thanks. the thing is that 20" screens are still mich more expensive than 19"s. therefore i have decided to go for a 19", maybe the HP w19, which costs a bit more than the HannsG, but looks very nice and in the future will match perfectly my MAC.
 
Since I've changed to DVI I've had problems.

Every time I boot up the screen goes black and I don't get a picture until I take out the DVI cable and plug it in again. Also, when I return to windows after playing a game not in 1440x900 the screen goes all corrupted. Once again, fixed by re-inserting the cable. None of this happens with the VGA cable. :confused:
 
Shamrock said:
Since I've changed to DVI I've had problems.

Every time I boot up the screen goes black and I don't get a picture until I take out the DVI cable and plug it in again. Also, when I return to windows after playing a game not in 1440x900 the screen goes all corrupted. Once again, fixed by re-inserting the cable. None of this happens with the VGA cable. :confused:
Click to expand...

I get exactly the same thing, only just noticed it?? I had red interference flickering across the screen until I removed the cable after playing BF2 just now, and I got a blank screen when I exited from Pacific fighters until I removed and reinserted. Surely a faulty DVI port?

PS what video card have you got?? Mine a 9600 Pro.
 
Last edited:
Shamrock said:
Since I've changed to DVI I've had problems.

Every time I boot up the screen goes black and I don't get a picture until I take out the DVI cable and plug it in again. Also, when I return to windows after playing a game not in 1440x900 the screen goes all corrupted. Once again, fixed by re-inserting the cable. None of this happens with the VGA cable. :confused:
Click to expand...


Im not a tft boffin but, what type of DVI-D cable are you using, is it a single link or dual link ?
Im using a Dual link cable and dont get any probs what so eva.
 
I'm thinking about getting this monitor and connecting PC via DVI... are the cheapo £10 DVI cables sold on here actually any good? I know AV people who spend £30+ on such things.

Also, can someone confirm that you can switch between DVI and VGA input at will (so, for example, we could connect a 360 into the VGA)?

Oh and dual link is required for higher resolutions because single link doesn't have enough bandwidth, hence it's needed for those 1920x1200 30" screens.
 
You must log in or register to reply here.
Back
Top Bottom