How long does your PC take to SuperPI 1M !!!!!!

Kesnel · 13 Oct 2006 at 12:40

This is the new Spi thread then?

I haven't had a system for months, but here my best old result. Looks very poor compared to the Conroes, hopefully soon I'll be able to put the Mach II to good use.

p4radox · 13 Oct 2006 at 16:55

What was the full spec for that Kesnel?

welshtom · 14 Oct 2006 at 16:49

Come on Kesnel, gotta do better than that

.

Wales all the way

JeffyB · 16 Oct 2006 at 15:46

New ram got me into the 26's quite pleased as im on air

Camalot · 16 Oct 2006 at 17:36

Before i post mine, what SHOULD mine be getting?

amd64 3200+ venice @ 2.5ghz
1gb Geil Value Ram
ATI X1800xt 256mb

manoz · 16 Oct 2006 at 18:33

1m 56s!!!

I should be getting better I guess

LoL manual says

We don't care the problems which may be caused by using or running Super PI program on your machine! We don't recommend for running Super PI with your important tasks!

At least they're blunt about it

w3bbo · 16 Oct 2006 at 18:36

Camalot said:
Before i post mine, what SHOULD mine be getting?

amd64 3200+ venice @ 2.5ghz
1gb Geil Value Ram
ATI X1800xt 256mb

I'd say around 34 seconds - depends on timings.

Camalot · 16 Oct 2006 at 20:15

w3bbo said:
I'd say around 34 seconds - depends on timings.

On a divider, dont know anything about timings really. My mobos got them on auto. I put command rate at 2T because of issues with asrock dual sataII.

w3bbo · 16 Oct 2006 at 21:25

2T won't help as its probably the most important memory setting for A64 cpu's.

Heres my best SuperPi 1m time :

manveruppd · 16 Oct 2006 at 22:44

Damn you Biffa, and I was so looking forward to having the worst result in the thread with THIS:

Heatsinked · 16 Oct 2006 at 23:06

Spec in siggy is out of date. Please read the spec in the picture below

vocch · 16 Oct 2006 at 23:45

w3bbo said:
Heres my best SuperPi 1m time :

Vcore a bit scary....but nice time.

w3bbo · 17 Oct 2006 at 00:11

<1.6 vcore is for the weak!

Its still a bit of an unknown what vcore will seriously damage these cpu's. My temps are great so that is one worry out of the way. I ran 1.65v through my Opty 170 for a year without problems when the big 'don't go over 1.55v and deffo not 1.6v' was being bandied about. I wouldn't risk it if I couldn't afford to replace it. I don't want to push it too far though, I don't have the balls to go past 1.65...need phase for that imo.

Biffa · 17 Oct 2006 at 01:11

manveruppd said:
Damn you Biffa, and I was so looking forward to having the worst result in the thread with THIS:

Mind you I could have run two simultaneously on my Dual PPro monster

Heatsinked · 17 Oct 2006 at 01:56

lol, and there was me worrying about my measly 1.55 Vcore

easyrider · 17 Oct 2006 at 02:36

Just pips webbo.

I need to install my mobo lol

w3bbo · 17 Oct 2006 at 06:51

easyrider said:
Just pips webbo.

I need to install my mobo lol

You have an ES though so that dosn't count....apparently

Doubt I would get anymore out of the cpu as my mobo starts to crap out around 420 FSB

. Waiting for the new NV chipset to arrive

Camalot · 17 Oct 2006 at 08:22

w3bbo said:
2T won't help as its probably the most important memory setting for A64 cpu's.

I just tried at 1T

1T - 37.4s
2T - 38.5s

Loads of difference !

w3bbo · 17 Oct 2006 at 09:56

1.1 seconds is actually a load of difference in superPI m8 for changing just one setting. Now try tightening the timings a little, add a little vdimm and increase the bandwidth

Kmodo · 17 Oct 2006 at 16:40

14 seconds at 3.2 ghz could be more if I restarted my pc and booted up in 3.7ghz but cant be arsed lol I would forget to even post a reply then lol

no seriously I would be like 'why did I restart my pc again?'