Indiana Jones and the Great Circle (2024)

As long as you have the latest NV driver, you can just use the latest profile inspector to inject DLSS 4 dll files and preset k, this is done on a global level so any game using DLSS will benefit.

In profile inspector toggle these three settings first:

94DUJWi.png


Then these two:

uSaR9Ed.png


Click apply at the top and that's it.

You can check that the latest dll version is being used and Preset K is being called by enabling this registry entry:

kvEkw2i.png


The decimal value of 1024 enables the overlay when in-game, it looks like this:

DaGuGMY.jpeg


Setting the value to 0 disables it. Keep that entry bookmarked in regedit so you can toggle it from time to time with new drivers/games to check that it's all working as expected.
 
Last edited:
mrk said:
As long as you have the latest NV driver, you can just use the latest profile inspector to inject DLSS 4 dll files and preset k, this is done on a global level so any game using DLSS will benefit.

In profile inspector toggle these three settings first:

94DUJWi.png


Then these two:

uSaR9Ed.png


Click apply at the top and that's it.

You can check that the latest dll version is being used and Preset K is being called by enabling this registry entry:

kvEkw2i.png


The decimal value of 1024 enables the overlay when in-game, it looks like this:

DaGuGMY.jpeg


Setting the value to 0 disables it. Keep that entry bookmarked in regedit so you can toggle it from time to time with new drivers/games to check that it's all working as expected.
Click to expand...

Thanks, great info. Much appreciated
 
mrk said:
I have that version already and it is missing one of the override toggles needed for the global method. I know where the 54 settings are in the official one though so no real need for the revamped version anyway.
Click to expand...

Looks like orbmu2k has updated his since your version as the settings are slightly different labels and in common now.
 
I'm a total noob to this.

I looked at what to do a few posts above. In the screenshot afterwards with the overlay on, it says "DLSSG V3.102" at the top and "DLSS V3" at the bottom. Is that what it should say, not DLSS4 ?
 
Last edited:
mrk said:
As long as you have the latest NV driver, you can just use the latest profile inspector to inject DLSS 4 dll files and preset k, this is done on a global level so any game using DLSS will benefit.

In profile inspector toggle these three settings first:


....
Click to expand...

POST OF THE YEAR.

Thank you x

I'm using 2.4.0.8 now and all is well :)

x
 
Last edited:
  • Like
Reactions: mrk
Personally I would keep to the hybrid one, it is laid out much nicer:

i6i10aN.png


Also, I wouldn't force it on globally as iirc, the devs for games like escape from tarkov said to be careful with doing this since could be seen as a cheat.
 
Obviously consider the games you play, for most of us the global method should be no problem at all, only a very tiny number of games don't like DLSS swap being done. This may even bypass Rockstar Launcher's restriction on dlss dll file swapping as it injects as the game loads which is after RGSC has checked loading files.

Have not checked though as CBA installing RDR2 on R* again.
 
mrk said:
Obviously consider the games you play, for most of us the global method should be no problem at all, only a very tiny number of games don't like DLSS swap being done. This may even bypass Rockstar Launcher's restriction on dlss dll file swapping as it injects as the game loads which is after RGSC has checked loading files.

Have not checked though as CBA installing RDR2 on R* again.
Click to expand...
9GUcqUc.png


edit, bit clearer.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom