• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Intel Xeon 3200 Series arrive at OcUK!!

Hi Bito.

To be honest nope lol.

But i dont want to have to drop to 2gb, i have increased the volts to the mem which in theory should ensure they should clock as well as if it was just 2 sticks.
 
Datamonkey said:
mine should be the same as pinks,

Ok guys quick one then, the bad axe2 i think is the limiting factor, with both my 6400 and the x3210. With the 6400 i could only get a max of 400mhz on the fsb and thats with 4gb worth of G-Skill 6400 HZ's i could only run the mem 1:1 also.

So should i just go hit the buy button on the abit quad gt :D
Click to expand...

Are they quad friendly like the new rev EVGA?

The P5B Delux is supposed to be quad friendly and will push 500 FSB.

I'm currently running a P5N32 E-SLI which will do 475 FSB on pretty much minimal chipset voltage. I'm not sure how quad friendly they are but its the best board I have owned so far.
 
Datamonkey said:
Big Wayne, dude i have seen you crop up in a lot of threads ;)
Click to expand...
Yeah I'm a frequent poster on these forums.
Datamonkey said:
sorry dude i may be on ocuk but i am not going to set my machine running for 24hours running orthos, prime such other crap.
Click to expand...
I didn't ask you to do that did I?
Datamonkey said:
Edit Big W. just read ya post again, should be able to get some screenies for ya this eve re 4 cpus and such.
Also with tat, it only shows 2 cores at the top, but mentions all 4 in the actual temp mon. window at the bottom if that makes any sense? the text part.
Click to expand...
Thanks for reading, I'm just interested in new stuff and wondered why no one was taking the time to 'share' some images with the geek posse?

Enjoy :)
 
Wish i could enjoy, what a crap week to end up on 24hour call out.

have to do a normal days work, and then on call as of 6pm till 8am the next day :(

been a busy one so far as well. Look after finger print systems for the police and some cluster servers for the royal snail :(

Will get the pics done tonite, and the full code up. :D as long as i dont get called out lol :p
 
lay-z-boy

what kit you using mate?

proc. mem and such. i dont have sigs turned on so sorry if you have it listed there. Also what temps and cooler lol

Cheers

off home now, so hope to get to play around more with mine later.
 
Datamonkey said:
i dont have sigs turned on so sorry if you have it listed there...
Click to expand...
I'll help you out then:
xeonsigxi0.jpg

X3210 | EVGA 680i | 4GB F2PQ | 8800BBQ | Quad RAID | XFI EP | H20

;)
 
nice results there guys, so tempted to buy the xeons as they seem to get 3000mhz quite easily which is more then enough for me.

now just need to find a good motherboard, it seems asus p5b deluxe is very good with quads and also the new dfi 965. Might be worth waiting for the asus P5k deluxe and new revision G0 xeons.

so many choices
 
Got it sat at 2.8GHz atm, temps are a bit toasty, Huge amount heat coming off of my 8800gts doesn't really help.
(I'm using a zalman 9500 by the way)

What cooler you using DataMonkey?
 
lol just noticed, as its idle speed step has kicked the multi down, will
do another screenie in a sec as long no one screams at the temps lol

will use tat to load it @100% :D

 
Last edited:
Does IntelTat properly load all 4 cores?

When I was running it cores 1 and 2 were hot, and 3-4 were about 10 degrees cooler :/

Mines idling at 50-55 with all my fans turned up about half way. Sooner a I watercool the better!
 
You must log in or register to reply here.
Back
Top Bottom