Lian Li PC-O11 Dynamic - Demciflex Filters installed.. cat then sick on them !

ubiquity · 9 Jun 2019 at 11:40

The coolermaster looks great in the 011D, not sure if anyone has verified how far close to the glass the Phanteks unit would get...

BBThread · 10 Jun 2019 at 14:08

@orbitalwalsh did you find you got much better intake from your fans with the demciflex filters on the O11 D?

I was watching the video about the Lian Li filters being a bit crap. I've already removed the top filter where I have the exhaust fans.

orbitalwalsh · 10 Jun 2019 at 15:21

BBThread said:
@orbitalwalsh did you find you got much better intake from your fans with the demciflex filters on the O11 D?

I was watching the video about the Lian Li filters being a bit crap. I've already removed the top filter where I have the exhaust fans.

can feel the air exhausting a lot more with the demci filters on !!!!! thats for sure !

BBThread · 10 Jun 2019 at 15:24

orbitalwalsh said:
can feel the air exhausting a lot more with the demci filters on !!!!! thats for sure !

What about on your intakes? Did you record some nice temp changes?

ubiquity · 11 Jun 2019 at 12:30

Am I right in thinking that for pressure optimised fans, the Lian-Li filters would have less of an impact than for standard case fans?

orbitalwalsh · 11 Jun 2019 at 12:41

ubiquity said:
Am I right in thinking that for pressure optimised fans, the Lian-Li filters would have less of an impact than for standard case fans?

I have Bequiet Silent wings and stock filters are still naff . But have the option to run at 90% all the time and is silent compared to most systems

ubiquity · 11 Jun 2019 at 12:42

Ah, thats pretty comprensive then, the Lian-Li filters and just terrible

Is there a kit available for the 011-D or did you just by each filter panel seperately?

orbitalwalsh · 11 Jun 2019 at 17:45

ubiquity said:
Ah, thats pretty comprensive then, the Lian-Li filters and just terrible Is there a kit available for the 011-D or did you just by each filter panel seperately?

I went to their site direct. Have mentioned to OCUK to order a large batch.
Their is a kit of can buy the panels needed, as the kit is for the Air version and dual PSU filters .
Its Its extra charge FedEx use that is a rip off

loonyk · 21 Jun 2019 at 20:41

BBThread said:
I think the Lian-Li will only work if you are planning on having nothing below the GPU as it mounts to the bottom of the case as well as the back.

is it?

orbitalwalsh · 21 Jun 2019 at 20:57

^^^ most install with bottom support , but can just use fans to support it

loonyk · 21 Jun 2019 at 21:04

orbitalwalsh said:
^^^ most install with bottom support , but can just use fans to support it

card isn't touching the fans

orbitalwalsh · 22 Jun 2019 at 07:48

loonyk said:
card isn't touching the fans

Nice, sorry, just remembered builds with rads in them

HKZonda · 16 Jul 2019 at 13:07

Really big thanks to @orbitalwalsh for introducing these Demciflex filters
the weather gets hotter lately and the windows are wide opened for 24/7, hence more dust floating in and the filters are doing their amazing jobs well!

orbitalwalsh · 16 Jul 2019 at 13:14

HKZonda said:
Really big thanks to @orbitalwalsh for introducing these Demciflex filters
the weather gets hotter lately and the windows are wide opened for 24/7, hence more dust floating in and the filters are doing their amazing jobs well!

nice! mines gets a lot because... its sat there doing nothing

damn kids !!! and 3rd inbound . whats worse!!!! i now have to put it in this !!!

https://www.ikea.com/gb/en/p/hemnes-desk-white-10402412/

!!! @Plec this is it... retirement from PC Gaming ! if it fits in that door and it closes... will be laid to rest like an Egyptian Pharaoh - only to be discovered again in a decade !

Plec · 16 Jul 2019 at 16:38

orbitalwalsh said:
https://www.ikea.com/gb/en/p/hemnes-desk-white-10402412/

!!! @Plec this is it... retirement from PC Gaming ! if it fits in that door and it closes... will be laid to rest like an Egyptian Pharaoh - only to be discovered again in a decade !

@orbitalwalsh did you confirm cubby hole size?

That is going to be a tight squeeze for your case from the pics - the Fjalla storage box (pictured i think(?)) inside the cupboard is 25cm wide from description.

You may need to apply some lateral thinking to get the case in and then let it breathe...

/hopes i'm wrong.

orbitalwalsh · 16 Jul 2019 at 17:05

@Plec

Bi*ch was told it would fit... The b***h being myself .. haha ..

So heres hoping. Sure the back is solid too... So might have to cut it or figure how to wirelessly power a PSU !!!

Rtx 2080 is going to melt it and I have a poor 2700 chip that eats 1.47v for 3.9ghz all cores !!!

iTX is was forward. Sliger SM580 !!!

Plec · 16 Jul 2019 at 20:34

@orbitalwalsh - ditch the case and make the cubby hole the actual case:

You could have an RGB modded front - i'm sure your wife would love that idea.

Some inspiration for you - imagine it's the cubby hole of your desk:

orbitalwalsh · 16 Jul 2019 at 20:46

@Plec think it might just remain a piece of hardware beauty hidden away haha

Plec · 16 Jul 2019 at 20:48

orbitalwalsh said:
@Plec think it might just remain a piece of hardware beauty hidden away haha

2 young kids and another due imminently plus a full time job - you have loads of free time...

HKZonda · 17 Jul 2019 at 11:25

orbitalwalsh said:
@Plec

Bi*ch was told it would fit... The b***h being myself .. haha ..

So heres hoping. Sure the back is solid too... So might have to cut it or figure how to wirelessly power a PSU !!!

Rtx 2080 is going to melt it and I have a poor 2700 chip that eats 1.47v for 3.9ghz all cores !!!

iTX is was forward. Sliger SM580 !!!

Yours a Ryzen 7 while I am using a 7-year-old E3 1220v2 (just spoiled my i7 3770k deliding it, memory error on slot 1&2) with 1080Ti
your cpu have way more juice to squeeze. Dont let it dusted!