My Water Cooling Log Bikerz

CyZMyAssBaby · 1 Dec 2007 at 14:59

marscay said:
from initial results it looks 1-2c better than a bowed fuzion with nozzle, but only a couple of ppl have the block so far.

not worth the hassle unless you're buying a new block.

Just re-read the posts 1-2c differential. Stick with my Fuzion

Bikerz · 1 Dec 2007 at 18:54

So far Alex and I (well I do the adjusting he tells me what to do) lol

We have 3.5Ghz.

The trouble we have run into is how to unlink the RAM anyone know? Its on a ASUS P5KC mobo , anyone?

CyZMyAssBaby · 1 Dec 2007 at 19:37

just checking the P5K official thread

http://forums.overclockers.co.uk/showthread.php?t=17731841

Bikerz · 1 Dec 2007 at 22:52

Right we are upto 3.56Ghz with 1.47V, temps get upto 47C on hiest core on prime when testing. So very happy already. Good work Alex. lol

Bikerz · 1 Dec 2007 at 23:22

3.6 Ghz at 1.52V. The V drop on this board is mad tho! cores getup to 53C.

Bikerz · 1 Dec 2007 at 23:41

upto 1.55V Alex. It failed prime at 1.53V. Temps upto 56C

CyZMyAssBaby · 1 Dec 2007 at 23:44

Bikerz said:
upto 1.55V Alex. It failed prime at 1.53V. Temps upto 56C

The vdroop on that motherboard is really evil :eek:

Bikerz · 1 Dec 2007 at 23:46

upto 57C now but stable so far and on test 6

Bikerz · 1 Dec 2007 at 23:47

I may leave it and go to bed. Im sure il ring you in morning. Once again thanks mate, realy pleased. Test 7 now

CyZMyAssBaby · 1 Dec 2007 at 23:51

Hopefully it will run prime stable now where you at on voltage 1.56?

Bikerz · 1 Dec 2007 at 23:54

It failed on 1.55V, so trying 1.56V now. CPUZ reads 1.31V temps are 58 prime95 testing. This ok?

CyZMyAssBaby · 1 Dec 2007 at 23:55

Bikerz said:
It failed on 1.55V, so trying 1.56V now. CPUZ reads 1.31V temps are 58 prime95 testing. This ok?

Yep

That motherboard has been renamed to Damien

Bikerz · 1 Dec 2007 at 23:56

Trying 1.57V now. Upto 59C.

STABLE at 1.57V.

CyZMyAssBaby · 2 Dec 2007 at 02:28

Bikerz said:
Trying 1.57V now. Upto 59C.

STABLE at 1.57V.

Yay

just the 8 hour trek to overcome

Bikerz · 2 Dec 2007 at 10:19

Isnt it getting a bit hot? Im re running prime95 now and see how it goes? It seems to be 59 C at the min

Billy 2 Sips · 2 Dec 2007 at 10:28

Am I reading that right, does cpu-z show the vcore under load at 1.312 ?

If thats reading correctly the vdroop is insane.

Bikerz · 2 Dec 2007 at 10:36

Yeap V drop is insane on this board. Alex wants to rename it Damien.lol.

Thats why I have to put 1.57V through her to become stable. Upto 61 C now

Billy 2 Sips · 2 Dec 2007 at 11:10

There's a pencil vdroop mod for that board, might be worth doing.

Instructions here.

I did a similar thing with my old asus board, worked a treat.

young · 2 Dec 2007 at 11:14

im at 3.6 with 1.4875 volts on air, and my CPU is a 1.2875 chip, yours is a 1.2375?! 1.57 is huge!

CyZMyAssBaby · 2 Dec 2007 at 11:15

Bikerz said:
Yeap V drop is insane on this board. Alex wants to rename it Damien.lol.

Thats why I have to put 1.57V through her to become stable. Upto 61 C now

Sheldon did the over clock pass the prime 8hr mark ok?

billsterno1 said:
There's a pencil vdroop mod for that board, might be worth doing.

Instructions here.

I did a similar thing with my old asus board, worked a treat.

well worth considering as that motherboard is totally evil :eek:

Personally i think this CPU has potentially a lot of head room for an over clock. The mother board is however proving to be the limiting factor preventing this.

Nice link billsterno1