17 Apr 2017 at 21:15 #294 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Nope still waiting
17 Apr 2017 at 21:17 #295 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 I'm not sure this will ever restart
17 Apr 2017 at 21:19 #298 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Okay, it's had 10 minutes. I'm pulling the plug! (Switching the switch)
17 Apr 2017 at 21:20 #300 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Oh yeah forgot I had that
17 Apr 2017 at 21:21 #301 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Okay, definitely set to 42. CPU manual voltage, now setting to 1.23
17 Apr 2017 at 21:28 #305 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Okay running blend
17 Apr 2017 at 21:28 #306 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Voltage has gone down to 1.240 when starting
17 Apr 2017 at 21:30 #311 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Shall I continue the test?
17 Apr 2017 at 21:30 #312 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Still 1.240, but did jump to 1.3 something quickly
17 Apr 2017 at 21:32 #313 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 1.232 then dropped to
17 Apr 2017 at 21:34 #315 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Jumping to 1.232 a lot now
17 Apr 2017 at 21:34 #316 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Now on that more than it's on 1.24
17 Apr 2017 at 21:37 #317 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Back to 1.240 generally
17 Apr 2017 at 21:38 #318 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Okay ten minutes done, Maximum temps at 81-84-85-84 although they finished at around 75-77-77-76 ish
17 Apr 2017 at 21:40 #320 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 Yeah, although hang on, i put the voltage to 1.23 didn't I? So actually the voltages didn't change Oh wait no I didn't, set it to 1.3 I think?? Can't remember
Yeah, although hang on, i put the voltage to 1.23 didn't I? So actually the voltages didn't change Oh wait no I didn't, set it to 1.3 I think?? Can't remember
17 Apr 2017 at 21:42 #322 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 The lowest was 1.232. Mainly stayed at 1.240 though
17 Apr 2017 at 21:42 #323 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 But, the core voltage currently says 1.232 so I'm starting to think I put the wrong value kn
17 Apr 2017 at 21:43 #324 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 I am going to have to go in the next 15 minutes I'm afraid, work early tomorrow! :'(
17 Apr 2017 at 21:48 #327 NathanL NathanL Associate OP Joined 13 Apr 2017 Posts 804 No I've checked, page 15 of this thread, you say, put to 1.3v and a few posts later I say that I've put it to 1.23v
No I've checked, page 15 of this thread, you say, put to 1.3v and a few posts later I say that I've put it to 1.23v
