Now the League and Cup are over...

ugggh - the fast box has just started the next WU - A/R is 0.004 degrees, could take 2:15 or longer - thats AGES :D!

2003 Feb 06 09:16 3.232,14.57 0.477 MDP - XP2700 @ 2.41GHz, W2Kpro 2:05
2003 Feb 06 11:04 8.07,22.62 7.323 MDP - XP2700 @ 2.41GHz, W2Kpro 1:49
2003 Feb 06 13:10 23.284,10.22 0.654 MDP - XP2700 @ 2.41GHz, W2Kpro 2:05
2003 Feb 06 15:18 11.348,21 0.458 MDP - XP2700 @ 2.41GHz, W2Kpro 2:07
2003 Feb 06 17:24 23.284,10.22 0.654 MDP - XP2700 @ 2.41GHz, W2Kpro 2:05
2003 Feb 06 19:13 0.372,28.58 1.983 MDP - XP2700 @ 2.41GHz, W2Kpro 1:49
2003 Feb 07 00:32 11.396,20.82 0.43 MDP - XP2700 @ 2.41GHz, W2Kpro 2:06


M.
 
Originally posted by MDPlatts
Some considerable difference in voltages - mines the abit nf7-s with a 430W Enermax PSU and MBM 5.2.2.0 with the 5.2.2.8 DLL. Think its setup right - will have to check the livewire website.
M.
Click to expand...

Hmm.. your PSU is better I believe, mines adequate, and is 550W but its the Q-Tech and not as high a quality as the Enermax (I have one at home)

As for MBM mines 5.2.2.0 but the 8RDA didn't need any special DLL's as it uses the Winbond bits for monitoring so we didn't have to wait. Your CPU temp is low!! Either your not running SETI when you took that screeny or its reading low, I've never seen temps that low even on idle and my ambient temp isnot much higher than yours.

Only thing missing on yours is the bios temps. But nice results however you do it! :D You said you are on 220Mhz memory are you running synchronous mem and fsb? If so that works out to an 11 multiplyer? What are your memory settings? I'm running 6-2-2-2 I think I'll try 5-2-2-2 tommorow.
 
Poo.. my results in setiq are cack coz all my good machines are behind NAT so look like the same machine to my queue (which is remote to them)
 
Don't need special DLL for the NF7-S - thats only for the poor ASUS users - but there are memory leaks in the normal one - fix is posted on the LW site.

Not got the bios temps - how do you get them - what sensor is that?

As for temps, don't know - fast spinning fan and Lian Li case with std fans - no blowholes. AS3 and seti was running - note the CPU utilisation :D - fancy acusing me of being a slacka!

Memory is Samsung PC3200 CL2.5 - and is at 3-3-3-6-? (1?) @ 220MHz x 11 - as you say. Two sticks of 256MB in slots 2 & 3 - away from the CPU - for the twinbank mode (I believe).

220mhz.jpg


Though sandra isnt meant to understand the NF2 chipsets properly, still better than any other system I have.

M.
 
Originally posted by -<=[Tw18]=>-
so lets see apart form m8 me jealous and decide i have to get a XP2700, has anyone run the benchy :p :D

hopes no one notices the cunning plan to stop epople picking on my hard ernt p4's :p
Click to expand...

Posted above - 2.09hours and e-mailed on an XP2700+ - they are coming down (now!!!) - the XP2400 is better value - and likely to be o/c'able to similar times.

Though with the 2500's and 3000's supposed to be out next week either get one of them or wait for more downwards pressure on the existing ones from the new ones - seems to be starting now to make some room for them.

M.
 
Originally posted by JayDeee007
core 0 volts=cpu
core 1 volts =ddr

MDplatts voltages look right

Biffa i want some DRR u have running at 1.9 :eek:

J
Click to expand...

I was thinking that too - 1.9 good! (not)

Does the Epox have the AUX 12V (PIV) power connector on the mobo - the Abit has - and that seems to have helped make the voltages much closer to what I think they should be - especially the 12V line that I've seen before on the same PSU with other mobos. The 12V line is the main driver in o/c stability IIRC.

M.
 
Originally posted by MDPlatts
I was thinking that too - 1.9 good! (not)

Does the Epox have the AUX 12V (PIV) power connector on the mobo - the Abit has - and that seems to have helped make the voltages much closer to what I think they should be - especially the 12V line that I've seen before on the same PSU with other mobos. The 12V line is the main driver in o/c stability IIRC.

M.
Click to expand...

but the POS dont have the holes in mobo to mount waterblock tho!!!!!:mad:

//looks for drill and soldering iron//

Or ANOTHER mobo :rolleyes:

J:D
 
Originally posted by MDPlatts
Posted above - 2.09hours and e-mailed on an XP2700+ - they are coming down (now!!!) - the XP2400 is better value - and likely to be o/c'able to similar times.
M.
Click to expand...

Best deals at the moment from OCuk seem to be the 1700+Tbred which is reaching 2.3Ghz on air and the 2100+ Tbred which is reaching 2.4Ghz+ on air! Thats around 800Mhz overclock on a Athlon, amazing.

Just check the Overclocking Forums, loads of peeps having fun there with these nice chips.

http://forums.overclockers.co.uk/forumdisplay.php?s=&forumid=7
 
Mark 1.1 does though - they're around now and the V2.0 will have more Voltage options later in the month.

The waterblock I have uses the 3pronged clips - but Its not installed yet - still on AX7 HSF.

M.
 
Originally posted by MDPlatts
I was thinking that too - 1.9 good! (not)
Click to expand...

The Epox and the other NForce M'b's are completely different as I said they use different chipsets for hw monitoring.

1.9V is my Vcore i got it wrong when i said 1.875 before, I remember I upped it to 1.9V to get Prime stable.

So
core0=AGP (thats the only thing at 1.5V)
core1=Vcore defo coz I set it at 1.9V

DDR is running at 2.77V or 2.9V (can't remember)
 
/me gives up on this thread.

I can't keep up with all the XP 2600+ this and XP 2700+ that. If this is a plan to make me buy another PC, then it's failed - I dain't buying no more hardware.:p
 
Originally posted by Mark G
/me gives up on this thread.

I can't keep up with all the XP 2600+ this and XP 2700+ that. If this is a plan to make me buy another PC, then it's failed - I dain't buying no more hardware.:p
Click to expand...

hey your lucky i got booted out my own thread cuz I a intel man, but i am looking at selling and buying now :mad:
 
Originally posted by -<=[Tw18]=>-
hey your lucky i got booted out my own thread cuz I a intel man, but i am looking at selling and buying now :mad:
Click to expand...
I've only got one AMD to my name, and only had that a few weeks. Decided not to bother overclocking it - I'd rather keep my hardware in one piece, thankyou.
 
Originally posted by Mark G
/me gives up on this thread.

I can't keep up with all the XP 2600+ this and XP 2700+ that. If this is a plan to make me buy another PC, then it's failed - I dain't buying no more hardware.:p
Click to expand...

Wimp! :D

Nah mate youre dual Xeon is a lovely machine, although I see "that" company are doing dual 3.06 Xeons now!!

Dual HT chips now thats how to push maximum WU's out of a single boxen..

The thread might be of interest to peeps who maybe are looking at where to maximise their cash if seti is their bag baby :D

And its fun, I've only got access to 4 Athlon boxes the rest are nearly all P3 based, and I do so enjoy pushing the envelope and if you get XP3000+ speeds (probably a 2-300 quid CPU) out of a 80 quid CPU thats amazing :D
 
You must log in or register to reply here.
Back
Top Bottom