Associate
Talking kak i hasten to add is highly underated, i have built a whole career around it.
OCUK Sandy Bridge, SB-E and Ivy Bridge 5GHZ Club
- Thread starter SimonMaltby
- Start date
Associate
Do you have room for shrouds between fans and rad ? As you lose ~20% of the surface area of the rad with the fans mounted directly .
Associate
Talking kak i hasten to add is highly underated, i have built a whole career around it.
Ladies and Gentlemen we have a politician in the thread.
Associate
not anymore, had to resign last week, something to with a problem with the phone lines??????????
Hey
Yup, kak can get you far. Epecially, I find, in interviews
no room for shrouds, its an antec 180 case so its crammed in there as it is. Could maybe fit a 240 rad in there with a dremmel though
On a side note, if I did buy a new block, my current tubing is mostly push in fittings. The tube is 10mm outer, and 8mm inner. What do I need besides the EK supreme block to carry on using this tubing?
It comes with no fittings, so I'm lost
Yup, kak can get you far. Epecially, I find, in interviews
no room for shrouds, its an antec 180 case so its crammed in there as it is. Could maybe fit a 240 rad in there with a dremmel though
On a side note, if I did buy a new block, my current tubing is mostly push in fittings. The tube is 10mm outer, and 8mm inner. What do I need besides the EK supreme block to carry on using this tubing?
It comes with no fittings, so I'm lost
Associate
5Ghz 1.36 in bios prime 26.4 Stable!
Associate
Cheating a bit well not really....call it giving yourself the best chance.
Close any running programs i.e. virus checker, firewalls, cpu-z,temp monitoring, etc etc etc they all steal milliseconds away from super pi
Associate
Tried my chip at 5 gig today seemed to run fine but temps hit 98c so have ordered a water block and will use my old water cooling rig.
3dmark06 hit 35 k with 5 gig hehe 35663 3DMarks
http://3dmark.com/3dm06/15341056
3dmark06 hit 35 k with 5 gig hehe 35663 3DMarks
http://3dmark.com/3dm06/15341056
Associate
98c!!!! Brave man, still it's worth it to see that magic 5! What vcore did it take? How stable was it?
Associate
Just because i had too
Associate
Was solid as a rock volts were 1.4 and i only ran 3dmark06 3dmark11 and heaven 2 then clocked it back down to 4.5 gig.
Ive ordered a water block from OCUK and its on the van this morning so that should sort my temps out.
Associate
- Joined
- 24 Aug 2007
- Posts
- 526
Actually Prime 95 runs hotter on the cores than both Linx and IBT, by almost 4 degrees
I can pass IBT at 5ghz but fail prime95
I can pass IBT at 5ghz but fail prime95
Soldato
Associate
Just got EK block and built up my h2o kit and the temps are now great.
before with my Zalman cooler and cpu at 4.5 gig prime would send the temp to 75c just done a quick test now and it hit max 53c running prime and idle temp was 26c now its 13c.
before with my Zalman cooler and cpu at 4.5 gig prime would send the temp to 75c just done a quick test now and it hit max 53c running prime and idle temp was 26c now its 13c.
Soldato
If your CPU temp is 13c how cold your room
you mean his igloo?
Associate
Associate