[OcUK Staff Builds] rjkoneill's TJ07

madindehead said:
What are all the other components in this build rjkoneill?

Looks like an awesome build. Wish I had the money to do this. Looks very high quality =)
Click to expand...

will do a components list soon as i get a lot of emails asking about certain bits etc

Sp00n said:
I'm not sure... you positive you've installed enough fans? :D
Click to expand...

NEVER! - fans are the way forward!

its surprisingly quiet though :D
 
The gelid fans do look good, i thought at first glance they were sharkoon silent eagles without labels.
 
rjkoneill can you kick Tom up the ass and tell him to get in the
Bitspower 45 Degree Dual Rotary Extension preferably in Black sparkle and too also get on the new Matt black ones :)

Nice build by the way mate im currently building a similar rig but with a Quad and 2 x 240mm rads :)

And have you got the sketchup TJ07 as the only ones i can find are pooh.

Cheers

Ultim8
 
Amazing build you have there rjkoneill, please could you explain how you have incorporated two pumps into your loop as its something I would like to do in the future:)!
 
Ultim8 said:
rjkoneill can you kick Tom up the ass and tell him to get in the
Bitspower 45 Degree Dual Rotary Extension preferably in Black sparkle and too also get on the new Matt black ones :)

Nice build by the way mate im currently building a similar rig but with a Quad and 2 x 240mm rads :)

And have you got the sketchup TJ07 as the only ones i can find are pooh.

Cheers

Ultim8
Click to expand...

we have a load more BP on its way, i bought all the first shipment :D
tom is in the process of listing the hundreds of lines of WC that OcUK has now

its going to be pretty special when it goes live!

its best if i leave Yewen alone - i pester him enough :p

Ultim8 said:
also you gonna get an mcubed for all them fans?
Click to expand...

i dont know what that is?

all the fans in the top of the case run off the board and only spin up when it gets hot enough
the fans on the bottom are all on a sunbeam multifan all spinning at low RPM
it doesnt perform as well as if they were on 100%, but its very quiet

put my preorder in for my SSDs thisafternoon, finally getting rid of those noisy hard drives!

^TANK^ said:
Amazing build you have there rjkoneill, please could you explain how you have incorporated two pumps into your loop as its something I would like to do in the future:)!
Click to expand...

hi, and thanks
the loop goes like this:
Pump1
Mosfet1
Mosfet2
CPU
NB/SB
GPU1
GPU2
Reservoir
Pump2
Quad Radiator
Double Radiator

it works much better than i thought it would, temps are great when the fans are on full whack, but i keep them on low
 
rjkoneill said:
hi, and thanks
the loop goes like this:
Pump1
Mosfet1
Mosfet2
CPU
NB/SB
GPU1
GPU2
Reservoir
Pump2
Quad Radiator
Double Radiator

it works much better than i thought it would, temps are great when the fans are on full whack, but i keep them on low
Click to expand...

Thank you for the reply rjkoneill:cool:.
 
Ducky Spud said:
Show off! :p

Id love to get an SSD just as a boot drive... maybe if I have a bit of cash left over after my next clearout I'll treat myself :p

2 of them in raid0 is gonna be nice and speedy though! :D
Click to expand...

i was going to have some different drives, but to be honest i knew whatever else i got, i wouldnt be happy with and would still want the intels :rolleyes:
 
Hi Rjkoneill the mCubed is a load balancer so you can plug all your fans in and is fully customizable so you can make all the fans balance here is a link to there website.

http://www.t-balancer.com/english/index.htm

I would look at the T-Balancer BigNG.

Also i see your going to raid 2 intel drives does anyone know if the trim function will work on them in raid? I know Samsung controller drives support raid trim i believe.

Cheers

Ulti
 
Ultim8 said:
Hi Rjkoneill the mCubed is a load balancer so you can plug all your fans in and is fully customizable so you can make all the fans balance here is a link to there website.

http://www.t-balancer.com/english/index.htm

I would look at the T-Balancer BigNG.

Also i see your going to raid 2 intel drives does anyone know if the trim function will work on them in raid? I know Samsung controller drives support raid trim i believe.

Cheers

Ulti
Click to expand...


i have seen one of those before - didnt know what it was called
they seem expensive for something i can essentially control via the headers on the motherboard

and the rad fans are on low all the time

the intel drives should support TRIM with a firmware upgrade soon into the release of Win7

Trim for RAID has been confirmed and will probably become an added feature of the IMSM software [just my guess]

heres a pic of my new tinted side panel window [theres another on the op]
the little button head screws make it look superb
i was going to mod the panel and make it so the window was on the inside of the panel to make it flush, but this just looks great as it is

DSC01348.jpg


i would have got a better one but the panel reflects all the pics i took and makes them look rubbish - going to try to organise getting the system photographed properly soon :p
 
You must log in or register to reply here.
Back
Top Bottom