Official DFI NF4Ultra-D/SLi owners thread.

[ps3ud0]

Why dont you just stick the standard HSF for the moment and see what you can do with the Zalman...

TBH Id rather change the HSF than the memory as memory with heatspreaders is usually of similiar size so no doubt this issue will reoccur...

Something like the XP-90 may be more easier to fit with all memory modules filled...

ps3ud0

 

[Ariaudo]

Panic over I swapped the memory for my son's OCZ PE and now the Zalman fits fine. Works out well cos he's an Asus A8V and the memory slots are far anough away from the CPU and he's got the see through side panel and can see the Corsair LEDs flashing away.

Phew!

 

[Simon1987]

Waiting for this board to arrive.

plan on using geil vaule, any problems? Should i update the bios?

 

[Jonners]

I have this mobo(ultra-d) up and running, but cant get into windows with dual channel, slots 2+4, using 1gb Geil Ultra-X

So i'm having to use single channel slots1+2

I've flashed to 310 bios but no luck either.

What can I do?

 

[Broken Hope]

I have this mobo(ultra-d) up and running, but cant get into windows with dual channel, slots 2+4, using 1gb Geil Ultra-X

So i'm having to use single channel slots1+2

I've flashed to 310 bios but no luck either.

What can I do?

Use 1+3

 

[Coolasmoo]

Just thought i would share:

FX55
2 x512 Corsair TwinX 3200 LL 2-6-3-2 1T
Bios 310 using Orange slots for Memory

All working together Fine,

Only issues so far.

Ati X850XT PE , I had to lift the back of the card slightly from the Top slot as it was trapping the Fan on the Chipset, Without reading the whole thread, im not sure if its just me with this problem.

Just running stock for now, while testing stability.


This is on the Sli-D version

 

[Broken Hope]

Just thought i would share:

FX55
2 x512 Corsair TwinX 3200 LL 2-6-3-2 1T
Bios 310 using Orange slots for Memory

All working together Fine,

Only issues so far.

Ati X850XT PE , I had to lift the back of the card slightly from the Top slot as it was trapping the Fan on the Chipset, Without reading the whole thread, im not sure if its just me with this problem.

Just running stock for now, while testing stability.


This is on the Sli-D version

I had that problem too, and since I'm not using the DVI I unscrewed the bottom monitor plug screw thing that the vga cable screws into.

 

[FreeStream]

Here is my best overclock I can get stable

290x9 with 1.575V, 166 Divider, 2-3-3-6 @ 2.8V

http://www.thunder-keep.co.uk/site/hosted/939pc/290x9.htm <-- Sandra Bench

1600x1200 image - cant access mac atm.
http://www.thunder-keep.co.uk/site/hosted/939pc/2610.JPG

Concorde

 

[vintage-x]

Im trying to get my motherboard to work with MBM. Its theDFI LanParty UT NF4 Ultra-D. Ive downloaed the .ini file which is on the first page but i still cant find my motherboard on the config wizard . Oh and yes I have put it into the right folder

 

[Wingz]

Im trying to get my motherboard to work with MBM. Its theDFI LanParty UT NF4 Ultra-D. Ive downloaed the .ini file which is on the first page but i still cant find my motherboard on the config wizard . Oh and yes I have put it into the right folder

u don't need to use the config wizard, just start MBM5 and it will display the correct temps, voltages etc.

 

[vintage-x]

u don't need to use the config wizard, just start MBM5 and it will display the correct temps, voltages etc.

got it workin now thanx

 

[FreeStream]

ha ha, wonders can happen with a reinstall and some slightly newer drivers!

Benchmark (75.41 --> 75.50 drivers)
3D Mark 2001 (25123 --> 27326)
3D Mark 2003 (12918 --> 14386)
3D Mark 2005 (5889 --> 6228)
Aquamark 3 (75716 --> 82960)Aquamark 3

Im happy now

Concorde

 

[tomo2big]

whats youre system spec concorde?

 

[FreeStream]

AMD 64 3000+ @ 290x9=2610mhz @ under 50C with XP-120
DFI SLi-DR
G-Skill TCCD @ 240mhz @ 2-3-3-6
XFX 6800 Ultra @ 451/1228
OCZ PowerStream 520W
CM Stacker

Concorde

 

[Bennah]

So you people would say the 3.10 offical bios is the best one ?

Tight mem timmings I would be planning on running.

I got a SLI-DR setup yesterday and this is the first time Ive looked into the stock bios and such. Just need to find a decent bios to flash to.

 

[platty]

the 310 official has been very stable for me. Allowed me some nice clocks as shown a few posts up.

 

[tomo2big]

AMD 64 3000+ @ 290x9=2610mhz @ under 50C with XP-120
DFI SLi-DR
G-Skill TCCD @ 240mhz @ 2-3-3-6
XFX 6800 Ultra @ 451/1228
OCZ PowerStream 520W
CM Stacker

Concorde

nice m8 could you give us a hand plz my system is as follows
3200 winnie +fx55 cooler @stock runs v cool 30c idle 35 load
dfi sli-dr with latest bios
corsair 3200xl tccd 5.2.2.2
2 6600 gt s stock
thermaltake purepower 560w

the cpu i bought off mm the steppings are a little dodgy cbbid 0450 gpaw
but the guy i bought it off assures me it did 10/250 @ 1.6 with ease so im putting the fact i cant get it above 220fsb down to me not having a clue about all the settings in my bios could someone plz help me though these setting and tell me what does what in this fantastic but complex bios thanks and nice work concorde martin

 

[ps3ud0]

I would suggest a seperate thread in the OCing forum might bring greater rewards. Not being able to reach the same o/c as the previous owner could mean a few different things aside from the mobo...

ps3ud0

 

[Simon1987]

how is the fan on this board? IS it worth finding a decent chipset cooler?

 

[tomo2big]

I would suggest a seperate thread in the OCing forum might bring greater rewards. Not being able to reach the same o/c as the previous owner could mean a few different things aside from the mobo...

ps3ud0

the only thing different in my set up is the mobo and gfx the ram i got off the same guy im sure its down to the fact i dont know enough about the bios i thought this would be the best place for the thread as its the dfi slidr owners thread see how it goes here if i dont get any joy ill move it thanks by the way