* Official Ryzen Owners Thread *

Smffy · 26 Jun 2017 at 18:35

@gavinh87 Thanks for the AIDA code, just ordered the 3600mhz Kingston Pred sticks - the 4000mhz are not in the UK stock yet. Chucked them in, set 3600 in BIOS, voltage to 1.35v and timings in just as listed 17-17-17 for the initial test. Booted first time no problems, AIDA tests show reasonable performance bar the read tests which i'll have to look in to - any ideas? Havent messed with much yet or tested at the higher CPU speed of 4.1 (I just leave it at 4.0 for 24/7).

Thinking about it I did run it with SMT disabled (forgot it was) so that might impact read speed?

eyetrip · 26 Jun 2017 at 18:36

Phill4321 said:
Well I have installed a fresh copy of Windows 10 and it is much faster! I highly recommend that no one takes the lazy option like I did and just plug your hard drive in to boot from your old copy of Windows . A fresh install is the way forward!

Get back to us once you finished installing all the apps you use

SupraWez · 26 Jun 2017 at 18:39

Smffy said:
@gavinh87 Thanks for the AIDA code, just ordered the 3600mhz Kingston Pred sticks - the 4000mhz are not in the UK stock yet. Chucked them in, set 3600 in BIOS, voltage to 1.35v and timings in just as listed 17-17-17 for the initial test. Booted first time no problems, AIDA tests show reasonable performance bar the read tests which i'll have to look in to - any ideas? Havent messed with much yet or tested at the higher CPU speed of 4.1 (I just leave it at 4.0 for 24/7).
Thinking about it I did run it with SMT disabled (forgot it was) so that might impact read speed?

Be interested to see what difference it makes pulling the speed back to 3333MHz with timings 14-14-14-34 for comparison.

Smffy · 26 Jun 2017 at 18:50

SupraWez said:
Be interested to see what difference it makes pulling the speed back to 3333MHz with timings 14-14-14-34 for comparison.

Yeah, strange the write speed is so low - just improved the timings and same thing but better write speeds. Interestingly L1 and L3 cache drops... Really need to get in to the mass of settings and dial it in though - quick CB run and its scoring quite a bit lower...

gavinh87 · 26 Jun 2017 at 18:52

Smffy said:
@gavinh87 Thanks for the AIDA code, just ordered the 3600mhz Kingston Pred sticks - the 4000mhz are not in the UK stock yet. Chucked them in, set 3600 in BIOS, voltage to 1.35v and timings in just as listed 17-17-17 for the initial test. Booted first time no problems, AIDA tests show reasonable performance bar the read tests which i'll have to look in to - any ideas? Havent messed with much yet or tested at the higher CPU speed of 4.1 (I just leave it at 4.0 for 24/7).

Thinking about it I did run it with SMT disabled (forgot it was) so that might impact read speed?

Ah yeah, there is a bug when going above 3600 which impact read speeds. I'll try to find the fix. In the mean time see if that is stable either using AIDA or HCI

gavinh87 · 26 Jun 2017 at 19:02

Make sure this is set to 1.
Credit for image goes to gupsterg

Smffy · 26 Jun 2017 at 19:16

gavinh87 said:
Make sure this is set to 1.
Credit for image goes to gupsterg

Ah yes I remember reading the same! Just been messing with the settings and I think the L1/L3 issue and CB score was just SMT not being enabled when i set it back to 'Auto', set to Enabled now works. 3333mhz posts some pretty decent results but will not boot at mega low timings...

Will try this and run it again - cheers!

SupraWez said:
Be interested to see what difference it makes pulling the speed back to 3333MHz with timings 14-14-14-34 for comparison.

Can't be bothered to try loads this evening but here you go:

Ste · 26 Jun 2017 at 19:20

Memtest is no longer causing screen blackouts. Baby steps! Haha

SupraWez · 26 Jun 2017 at 19:44

Smffy said:
Can't be bothered to try loads this evening but here you go:

Thanks, your results are pretty much identical to mine with same settings

Smffy · 26 Jun 2017 at 19:53

gavinh87 said:
Make sure this is set to 1.
Credit for image goes to gupsterg

Sorted yep... Actually now its just beat my previous CB score without actually putting the CPU on 4.1 (or 4.15) as it was before so clearly improved! There is probably some room in the timings. Memory defaults to 2T if I set gear down disabled and will not post on forcing 1T so whatever that does its better on Auto.

So far so good, pretty happy with my tester non-xmas tree RAM.

Edit: Couldnt resist testing with CPU at 4.1, CB score smashed but AIDA wont complete that bench. I already knew I need more volts and probably a few more setting tweaks to be totally stable at 4.1 (1.45v) but this is why I don't use it outside of benching

opethdisciple · 27 Jun 2017 at 23:09

Like how Watch Dogs 2 is warning me that my 1700 doesn't meet the minimum CPU requirements.

SupraWez · 27 Jun 2017 at 23:19

Upgraded my CH6 BIOS to 1403 from 1401, now running Stilts 3466 memory profile, my AIDA65 and CB scores have improved nicely, running a RealBench test at the moment, also managed to fix my FSB to 100, the DRAM and Core needed a little more volts.

marcus2704 · 28 Jun 2017 at 08:38

I am awaiting delivery on a Ryzen 5 1600 CPU which was intended to be a secondary PC build for Plex etc, out of interest how would it perform in a gaming PC setup geared towards 4K? Currently have a 5820K setup, performance would take a dip with the Ryzen wouldnt it?

Hagar · 28 Jun 2017 at 09:02

marcus2704 said:
I am awaiting delivery on a Ryzen 5 1600 CPU which was intended to be a secondary PC build for Plex etc, out of interest how would it perform in a gaming PC setup geared towards 4K? Currently have a 5820K setup, performance would take a dip with the Ryzen wouldnt it?

Are you overclocking now?

Probably slightly lower maximums and higher minimums, depending on the frequencies that you can get from the 1600 setup and your graphics card capability.

marcus2704 · 28 Jun 2017 at 10:23

Thanks, I have since decided to stick with my original plan to use the overclocked 5820K for gaming, with the Ryzen for Plex/Docker and so on.

haszek · 28 Jun 2017 at 11:12

marcus2704 said:
I am awaiting delivery on a Ryzen 5 1600 CPU which was intended to be a secondary PC build for Plex etc, out of interest how would it perform in a gaming PC setup geared towards 4K? Currently have a 5820K setup, performance would take a dip with the Ryzen wouldnt it?

You won't see any differences, 4k/60hz if you have good GPU(s) it will be locked at 60fps, if you have weaker GPU you can use i3 and it will give you the same amount fps at this res.

N19h7m4r3 · 28 Jun 2017 at 15:45

Hey guys, anyone here with the Asus Prime 350 Plus not able to update their BIOS?

I've tried all the versions available, tried EZ Update, Online, USB, formatted the USB to FAT32 several times, and tried all the USB ports. It keeps saying they aren't proper BIOSs.

It's extremely frustrating, and tried different region downloads, on different PCs, and different USB sticks, and renaming the BIOS as well.

opethdisciple · 28 Jun 2017 at 17:54

That's an odd one.

There's no write lock (I know we're doing a read but clutching at straws) on the usb or file permissions odd on the file?

N19h7m4r3 · 28 Jun 2017 at 17:56

opethdisciple said:
That's an odd one.

There's no write lock (I know we're doing a read but clutching at straws) on the usb or file permissions odd on the file?

Nope, I checked. Even tried the EZ Update software's online mode. :/

This is certainly a first for me.

opethdisciple · 28 Jun 2017 at 18:00

N19h7m4r3 said:
Nope, I checked. Even tried the EZ Update software's online mode. :/

This is certainly a first for me.

Hmmm

Could try renaming the file. Could be a character limitation in file name.

Competitor rules

*** Official Ryzen Owners Thread ***

* Official Ryzen Owners Thread *