Only MAJOR overclockers need apply - survey!

cuscus97 · 14 May 2005 at 01:04

well mr. InSanCen, i'm just re-overclocking, as it were, and i'm currently at 2315mhz (=220x10.5) - 1.725v/2.6vand i'm scoring 44s on SuperPI!!
I think you've got some serious clocking to do...and i'm not even using AS, just some generic thermal gunk the local IT shop sold me for 20p, as they didn't have the AS. So there!

InSanCen · 14 May 2005 at 07:40

Ok, challenge accepted. It's Sunday tomorrow, and I'll see what I can do. I'm limited by the BIOS (AS5 seems to have bedded in), as it will not boot with a 10 or 10.5 multi, so I'll have to flash it. God, I'll never feel comfortable doing that. Still, we'll see what I can get.

Currently at 220*11, daily running (just finished a blast or 2 on NFSU2)

Killajaz · 14 May 2005 at 19:55

Hi there, please update the XP-M section with another decent clocker:

Thats using an NF7s 2.0, SP-97. but no AS5

With decent ram and AS5 I should be able to do wonders with this baby. Stepping is IQHYA (xp-m 2500)

InSanCen · 18 May 2005 at 22:51

weescott, Update your table please

http://valid.x86-secret.com/show_oc?id=18553

1.8v (1.85 in BIOS), notice Timings (less than 11 makes SuperPI Sooooooww)

Still Using same Cooling setup (I'm too skint to get a good W/C setup, and I 'aint getting a **** one)

PhatEd · 18 May 2005 at 23:27

IamMed · 2 Jun 2005 at 23:33

will take screenie later when network is installed, new chip runs 32m superpi at 2.8ghz

been in windows semi stable at 2.85, so may try suicide 2.9ghz later for ya weescott

FreeStream · 3 Jun 2005 at 10:24

2.9ghz San Diego, Air Cooled, 290x10, 2.5-4-3-7.

http://www.thunder-keep.co.uk/site/hosted/sandeigo/290x10_screen4.jpg

100% STABLE!!!!

Concorde

IamMed · 4 Jun 2005 at 21:25

as promised

3200 SPAW, 512meg BH5, DFI Ultra-D, Watercooled

IamMed · 4 Jun 2005 at 21:33

cant find record screenie for newcastle but found this one:

3500NC, 1gig TCCD, MSI Neo2, Watercooled

stable

surge · 4 Jun 2005 at 22:37

San Diego 4000+ 0505, watercooled, OCCT stable, 3.06Ghz (10x 306)

sharingan_sasuk · 7 Jun 2005 at 19:15

Got my XP2500-M to 2.368Ghz with my ICE cooler and Akasa Amber 120mm fan (using 80-120mm fan adapter) and 2x256MB PC2700 DDR RAM. So gonna order some PC3200 soon and see how far that goes. I think it's currently at 182Mhz FSB with 12x multiplier and 1.71v Vcore. About 48C on load. No pictures atm since I'm on my iBook. Will definitely post some once I get that RAM.

I could try more but I dunno whether it's safe to go over 1.75v in my Shuttle SN45G.

ShiWarrior · 12 Jun 2005 at 23:00

Johny Boy said:
2600M on air
nf7-s v2
2x Geil PC3500

AXMG2600FQQ4C
IQYHA 0352MPMW

What timmings did you use ? especially the last one

cuscus97 · 12 Jun 2005 at 23:16

considering the speed on that, you should get a better score. With my t'bred at 2.5ghz i get 39s (as my record). Try shutting all that rubbish you have open...

ShiWarrior · 13 Jun 2005 at 05:57

theboyrob said:
what temps r u getting with yours?

My barton is on a KT600.

its a fairly cheapo case, but looks good in a aluminium looking front, have stealthed the cd drives too and have no floppy.

4 x 80mm fans blowing in at the front.
1 x 80mm fan at the side blowing in
1 x 80mm fan blowing in from the top
2 x 80mm fans at the rear blowing out

artic cooler on gpu

bit overkill really!

The top fan should be blowing Out (up)

mine :

1 Fan at front blowing IN
1 Fan at back blowing OUT
2 Fans blowing IN at the side
2 Fans blowing OUT at the top

CaDLoN · 13 Jun 2005 at 11:04

P4 3.0GHz Northwood 30 Capper @ 262x15 (3930)
1024MB (2x512MB) Kingmax Hardcore DDR500 @ 1:1 - 262
DFI LanParty PRO875B Rev.B
Cooling (Air) CoolerMaster Hyper6 with Thermaltake Smart Case Fan 2

Stable enough to run SuperPi

Jackal · 21 Jun 2005 at 13:36

100% overclock on my xeons @ 16x 200
Stepping: SL6XK
Cooling: Copper 2U heatsinks
Motherboard: Asus NCCH-DL
Memory: Corsair XLPT v1.1

KarlMcWade · 29 Jun 2005 at 14:14

testing my m xp can get over 3100mhz just not stable yet

2850 mhz should make me seventh

an7

twinmoss nasty m tech chips pc3200

water cooled, cooling tower :eek:

IamMed · 29 Jun 2005 at 14:35

need voltage in the screenie, also details of cooling etc
nice clock btw, shame my old NF7-S died, I still had more voltage to play with lol

weescott · 29 Jun 2005 at 14:37

KarlMcWade said:
testing my m xp can get over 3100mhz just not stable yet

I don't care if it's stable, get a screenie posted and I'll update the table!

Hold on...you have beaten my score...errrr....the XP-m section is now closed!

IamMed · 29 Jun 2005 at 14:39

btw 2850mhz makes him 7th, dunno where he got fourth from lol, weescott, UPDATE THE TABLES

please

I think I have the fastest winnie lol