Only MAJOR overclockers need apply - survey!

[matt100]

1)
Pentium-m740 & ASUS P4C800ed @ 2823mhz


2)
SD3700+ & DFI ultra-D @ 2901mhz


All watercooled.

and look at the pentium M jump up and down on the amd!

That thing has some serious potential! Nice clocks!

 

[stigggeh]

thought i would get this thread going again

1) my trusted old P4

[email protected]

not stable

SP94 Air Cooled, P8c800 1.65v, ocz3200plat R2



-------------

my new pentium M

Pentium M @ 2800mhz

super pi stable, not tested it any longer as i have just got it, air cooled (zalman 7000)

----------

thats all for now, i might fire the old XP @ 2700mhz tomorrow if i get time

 

[h2ocooler]

P4 3.0E Presscot @ 4.0 stable, Stock vcore.
Asus P4P800SE

 

[Kaiju]

As per requested, here's my 1700+ DLTC3, air cooled, PI stable and has been running all day crunchin' on full load so would say stable if you can count that.

Other details; NF7-S rev2.0, 1GB CH5 @ 5-2-2-2

 

[Kaiju]

As it looks like i'm 0.1MHz off XP's 11th spot, i've been able to get 2539MHz.

 

[cavemanoc]

Jet - try 2-2-2-11 - (11) is much more stable with NF2 boards - might help you squeeze onto the table!

 

[Jimbu]

Heres my OC using 3200 geil value ram overclock is unstable at load but i can use it at 2.6 without probs. At the mo ram is limiting me so ill be getting some better ocing ram

 

[Kaiju]

Sticky the first post perhaps?

 

[InSanCen]

Can't have someone knocking me down a spot.



Nah, this is better...



XP1700 @ 2559, 2x512MB Corsair PC3200LL (CH5)@ 232, NF7 (Non-s), SI97, massive airflow (noisy)

 

[weescott]

Thats what I like to see, some friendly competition.

 

[matt100]

will I have the first dual core p4 with an unstable overclock by the end of the week?

P4 830 looking for dual 4ghz

 

[Kaiju]

Thats what I like to see, some friendly competition.

LOL!

I'm bringing out the big guns in a few days with mass fan cooling... prepare to be burned InSanCen, or in this case, blown away!

 

[vocch]

Hi guys...i got a cpu-z verified of my 3000+ venice@2981mhz.
Oh forgot to mention also on air 1.6v...heatsink freezer64.

 

[weescott]

Screenie please. And welcome to the forum

 

[vocch]

Screenie please. And welcome to the forum

Here you go.http://valid.x86-secret.com/show_oc.php?id=27710

 

[InSanCen]

Me too The Jet...

Should have 120mm Delta+Vantec Tornado coming, to add to my 172x150mm Papst, 80mm delta EHE, 80mm Delta SHE.

Oh, and I'm looking at a 300CFM Comair Rotron... If I can convince the GF it only costs 15 quid or so....

Oh, and I'm looking really hard at 5th place on the AXP table... I think I can get that...

The chip in my rig is the one from 4th place too, so I know It can go fast, and I've got a couple of backups.

Should be interesting...

 

[Kaiju]

Nice InSanCen, that setup should definitely get the best air setup around. Meanwhile i should be getting me a nice 2500+ XP-M to add to the other chart.

Let the battles commence.

 

[SimonMaltby]

Results here...

This is SD 3700 at 330 FSB 1:1 Ratio Ram All on the Screen shot.

 

[InSanCen]

Good luck Jet, My Delta+Tornado arrived , and I've been banished to my Former Darkroom, where Ambient is 5-10c lower The GF had enough, and says it can't live in the front room anymore, but hers can as it's real quiet

Aiming for at least 2620, which IIRC, should take the 5th spot on here, and top for Air-cooled AXP.

Still give your AXP a run, I'm already determines to beat cuscus97, so why not make it more of a challenge for me? Think you can 1M SuperPI at 2620+??? I think I can get it (Super confidence, but likely to go screaming down in Flames)

InSanCen

 

[cuscus97]

haha you haven't beaten me yet, after years of trying. What makes you think you will now? [/trash talk]