PHANTEKS EVOLV X & P600S

[ChugNorris]

Now available for preorder are the hotly anticipated Phanteks Revolt X Power Supplies. These are ideal for anyone planning to build a dual system into the Evolv X (or any other dual system compatible case such as the Mini-XL and some Lian-Li cases to name a few), as they enable you to power two motherboards with one unit, using their patented state of the art internal PCB. Added to that they are 80 Plus Platinum Certified, fully modular, with 12 years warranty and based on the Seasonic Prime Ultra platform. Essentially, all the right things Available in 1000W and 1200W flavours, I have VERY LIMITED initial stocks arriving, so if you're interested, I'd suggest preordering ASAP.

Phanteks Revolt X 1000W 80 Plus Platinum Modular Power Supply @ £214.99 inc VAT https://www.overclockers.co.uk/phan...-platinum-modular-power-supply-ca-086-pt.html



Single PSU for dual motherboard systems, control each motherboard independently, manufactured from premium materials, 80 Plus Platinum certified



Only £214.99 inc VAT.

ORDER NOW



Phanteks Revolt X 1200W 80 Plus Platinum Modular Power Supply @ £234.95 inc VAT https://www.overclockers.co.uk/phan...-platinum-modular-power-supply-ca-085-pt.html



Single PSU for dual motherboard systems, control each motherboard independently, manufactured from premium materials, 80 Plus Platinum certified.



Only £234.95 inc VAT.

ORDER NOW

 

[snips86x]

@ChugNorris @Phanteks_Care I didn't get the top magnetic rad frame covers in my delivery from OcUK. Are these supposed to be supplied or an additional extra?

 

[Mcthommo]

mine was inside one of the HDD caddies

 

[clone]

And you only get one.

 

[ChugNorris]

@ChugNorris @Phanteks_Care I didn't get the top magnetic rad frame covers in my delivery from OcUK. Are these supposed to be supplied or an additional extra?

One is supplied, as mentioned already though, check with your HDD caddies as it should be in with those.

 

[Mcthommo]

Fan hub- I have all 3 pin fans on my rads- will these still be able to connect to 4 pin ok or will I be best using a splitter as I do have some somewhere!

 

[snips86x]

One is supplied, as mentioned already though, check with your HDD caddies as it should be in with those.

Yeah, I did...unfortunately there's nothing there. Took all the accessories out but can't see them

 

[ChugNorris]

Ok, email Phanteks using RMA AT phanteks dot com and they will be able to supply a replacement no doubt.

 

[ChugNorris]

Small qty of each PSU is now in stock!

 

[Sega Mega Dave]

Bought the case today and it's really nice to build in. Gone from full size case to midi is nice too.

Not as fancy as some on here but I'm happy with a nice simple scheme.

 

[Raumarik]

Figured out a use for the shroud cut out using a goverlay LCD panel

 

[clone]

Cool idea mate like it.

 

[Italiux]

Nice, I like it

 

[Ayyub]

My front panel rgb buttons are not working. Is it because I connected the m/b rgb connector to motherboard? (Ive connected it to 3 pin rgb on z370e m/b)

Right now all I can do is turn rgb lights off by holding down the buttons at the top of the front panel.

Help much appreciated.

 

[Raumarik]

Yeah think when it's mobo connected they won't do anything other than on/off. Same on my case although obviously I manage it via software

 

[clone]

This is correct if you put the mobo rgb header on you need to use the software from the board manufacturer to get them to work.

 

[Andy pearson]

 

[clone]

Can't see the image?.

 

[Andy pearson]

I'll try that again sorry. Completed the build on Thursday and really happy with it. Excuse the bends first time building a hardline loop.

 

[Italiux]

I'll try that again sorry. Completed the build on Thursday and really happy with it. Excuse the bends first time building a hardline loop.

Which pump+tez are you using? How thick is your front rad? What size tubing?