• Notice regarding image hosts and attachments. See here.

Road Cycling Essentials

Status
Not open for further replies.
[DOD]Asprilla;22114257 said:
Knee pain could be any number of things, most likely cleat positioning.

Back pain sounds like a result of the frame being too small. Raising the saddle makes your bum higher but increases the drop between saddle and handlebars. You've put on a longer stem to take into account the short top tube but unless it's got a massive degree of rise on it you are still going to be bending over a long way. I would suggest your problem is a short head tube on the small frame.

If it's any consolation I did exactly the same and bought a frame that was too short and had the same issues.

Get a bike fit. Most shops will discount it from the cost of whatever you buy as a result of it.

I've had a bike fit last Tuesday, who suggested the longer stem to make the bike fit. I agree now the seat has been raised I'm leaning over a lot further coupled with my poor flexibility isn't helping.

I bought the bike from one of my friends who I ride with, I'd feel guilty chopping it in and buying a different bike as he did me a good deal 6+ months ago.
 
Ive not got a map of the route we go Henley way, sorry, ive been going to Reading via Twyford the last couple of weeks which is quite nice, we've been stopping for a home made beer in zero degrees micro brewery then off home, Saturdays ride included 3 punctures

Heres a slow ride from the last month, i believe this one included 4 punctures. :)
http://www.endomondo.com/workouts/lRITbCvd8aY
 
Lead Head, I'd pay for a proper bike fit. There's too many variables to get it right by yourself if you are inexperienced. Although the lower back pain could be caused by a longer stem, it can also be caused by a frame that's too big, or a lack of flexibility and core strength.

Core strength tbh.

I had lower back pain/fatigue a few months back. I got a bike fitting (which they lengthened the stem). It was more comfortable but I still got sore. A few sessions at the gym doing back-core work (the plank etc) and im better. The pain/fatigue is still there but occurs much later in the ride.
 
ok, bike cleaning time
what do you guys use/do when cleaning your bike after it's gotten filthy riding to work in the rain?
not got a chain cleaning box or anything yet so it's sponges and brushes only right now!
 
ok, bike cleaning time
what do you guys use/do when cleaning your bike after it's gotten filthy riding to work in the rain?
not got a chain cleaning box or anything yet so it's sponges and brushes only right now!
Brush off anything loose or if it's caked in mud give it a sponge down with a bucket of water and a bit of car shampoo. Then clean the frame up with an oily rag. I run the chain through a rag by winding the cranks round to get the most of the built-up crud off it but never bother taking it off and soaking it. I sometimes spray it with WD40 to loosen any thick gunk, same for the chain ring. If I've got the wheel off I'll take the cassette off, separate the gears and clean them all, but this might only be once a year or less.

Somebody will post this said:
I'll never use WD40, it has silicone in it
No, it doesn't.
 
No, it doesn't.

No, it may not contain silicone, but it is a degreaser.

If you're using it to clean your chain, thats fine. It will remove any old, dirty lubricant. (it's also good for cleaning greasy marks off your frame)
You then need to properly clean off the wd40 and reapply chain lube.
 
I'd tend to agree with poor core strength. Is there a way to test core strength?

Planks are a great way to build core strength.
3 reps, resting in between. Best to start off with an even ratio; 1 minute plank/30 second rest (ballpark), to test your core strength.

Increase hold time/decrease rest time as you improve.
 
I've had a bike fit last Tuesday, who suggested the longer stem to make the bike fit. I agree now the seat has been raised I'm leaning over a lot further coupled with my poor flexibility isn't helping.

I bought the bike from one of my friends who I ride with, I'd feel guilty chopping it in and buying a different bike as he did me a good deal 6+ months ago.

I had the same but they were also frank about the fact that the new stem and seat position was a case of polishing a poo. Yes, the reach was right and yes the saddle was right but the drop between saddle and bars was around 6".

It was very areo and quick; the following week I finished quickest in a 70 mile Dorset CTC sportive but I could barely walk after getting off the bike.
 
[DOD]Asprilla;22119064 said:
I had the same but they were also frank about the fact that the new stem and seat position was a case of polishing a poo. Yes, the reach was right and yes the saddle was right but the drop between saddle and bars was around 6".

It was very areo and quick; the following week I finished quickest in a 70 mile Dorset CTC sportive but I could barely walk after getting off the bike.

I'm having similar issues - what was the solution for you? I appreciate these are all very personal but it gives me a start on what to look for in a new bike.
 
I'm having similar issues - what was the solution for you? I appreciate these are all very personal but it gives me a start on what to look for in a new bike.

New frame I'm afraid. I could have had stem with a massive rise on it, and we tried it, but it looked dumb and the handling suffered badly. The chap doing my fitting told me which frames I should be looking at from their stock and gave me max and min values for the top tube and head tube. I took it from there and test rode bikes that fitted the criteria until I bought a frame I wanted and built it up.
 
Status
Not open for further replies.
Back
Top Bottom