Show Us The inside of your Case!

starkill3r · 30 Oct 2011 at 23:22

Bezzaboy1234 said:
Can you get more than just the 2GB sticks of tracer RAM anywhere?
I can only find 2GB sticks or 4GB kits (2x2GB) just wondering if you can get 4GB
sticks anywhere?

Cheers

I'm not sure, i paid £30 for 2x2GB second hand.

My rig is about to change into my sig on Tuesday will post new pics then

SeraphX · 31 Oct 2011 at 08:37

flippant said:
I bought myself a new toy, I'd claim to have built it, but it would be a lie.
SNIP
I'd take pictures of the outside, but it's so damn big I can't get far enough away in my tiny office.

you spend all that money on an SR2 build, then skimped on nasty Antec coolers, :rolleyes:

get some custom water in there!

Purgatory · 31 Oct 2011 at 12:06

Full specs in sig.

icedbullet · 31 Oct 2011 at 15:45

My first proper build.

starkill3r · 1 Nov 2011 at 22:00

My Raven

dwskillz · 3 Nov 2011 at 09:47

dannycivic02 · 4 Nov 2011 at 12:06

Well thought I would stick mine up as its pretty much finished now just waiting on my case LEDs when they decide to arrive had a go at a bit of cable braiding which I think looks loads better now. And yes I've gone for a red and blue theme.

bhavv · 4 Nov 2011 at 14:19

Current insides pic:

I placed my higher CFM Xigamatek fans on the radiator and next to the graphics cards, and two of my older low RPM / CFM red cooleraster fans for the front intake and top exhaust.

Completely silent and great airflow over the graphics cards and radiator

My P182 case looks so unimpressive these days, but its still great.

MeatLoaf · 4 Nov 2011 at 18:35

Heres mine since changing power supply and going SLI. Best i could do with cable management.

blitzyuk · 6 Nov 2011 at 01:11

Why do people always mount the Corsair H series watercoolers upside down. Even they recommend mounting it with the logo the correct way up. It cant be good having the tubes that close to the GPU's especially the heat generated from the back.

mrk · 6 Nov 2011 at 01:21

blitzyuk said:
Why do people always mount the Corsair H series watercoolers upside down. Even they recommend mounting it with the logo the correct way up. It cant be good having the tubes that close to the GPU's especially the heat generated from the back.

The radiator is the right way up...his block is just upside down.
The GPU doesn't exhaust heat through the top, it makes no difference.

Tommyzz · 6 Nov 2011 at 01:56

I will not even show anyone my new build at the moment. It's got a massive IDE wire stretched across it with an old CiT PSU. Looks a state.

N$X · 6 Nov 2011 at 02:39

Robertnpmk · 6 Nov 2011 at 09:01

Hmmm whats that bracket that you have hiding your cables?

Thinking of getting one myself.

PESolution · 6 Nov 2011 at 11:29

Uploaded with ImageShack.us

khare · 8 Nov 2011 at 00:06

Here's mine, just finished sorting out the cabling, as after reading this thread got me in the mood to do it!

Having an IDE storage HD makes it difficult, IDE cables are very awkward.

Yeoo · 8 Nov 2011 at 16:24

389787_2292432264084_1047330976_32116695_1092751586_n.jpg

My first build,

Freezer 13 on its way with some blue leds for fans and a blue led strip as well. Cutting a window in the side of my case over next week when i get a chance (Arc Mini)

NZXT Hale 90 650w PSU with Bitfenix white braided cables on my too do list.

Hyburnate · 8 Nov 2011 at 16:34

Does the case not have any cable management at the back? What PSU is that?

bhavv · 8 Nov 2011 at 23:47

blitzyuk said:
Why do people always mount the Corsair H series watercoolers upside down. Even they recommend mounting it with the logo the correct way up. It cant be good having the tubes that close to the GPU's especially the heat generated from the back.

The cables fit a lot nicer with it upside down.

MrSteven · 8 Nov 2011 at 23:53

****Show Us The inside of your Case!****

Show Us The inside of your Case!