****Show Us The inside of your Case!****

[almostgfx]

Another addition.. nearly finished with its looks!!
Was happy this morning my bitfenix 6 pin red came from america only to open
it up and find they had sent me a 24 pin connector!! :'(!!

 

[smurf_k0]

woah these look amazing. how much would you pay, minimum for one of these?

 

[macarule]

Macarule, how are the noiseblockers noise wise? How much air do they push?

they are excellent, on full all you can hear is air noise, when down at 50% practically silent and they push a lot of air

switched out my tubing and added new lighting, 6Pin extensions are on their way!

 

[KiiYzOo]

Mmmmmmmmmmm, nice may get some of the noiseblockers when I upgrade my case

 

[almostgfx]

woah these look amazing. how much would you pay, minimum for one of these?

I paid £68 for 8GB and got the airflow ram cooler too which wasnt listed
when i brought them

 

[jamesfreddie]

they are excellent, on full all you can hear is air noise, when down at 50% practically silent and they push a lot of air

switched out my tubing and added new lighting, 6Pin extensions are on their way!

http://i900.photobucket.com/albums/ac203/macarule/RIMG1110-2.jp[/QUOTE]

Do those graphics cards get hot?

I am only saying because there is little gap between them.

 

[MatsyLR]

Looking awesome macarule!

 

[TheLegendOfMart]

Interesting place to mount 5 1/4 fan controller. Zip ties?

 

[macarule]

Mmmmmmmmmmm, nice may get some of the noiseblockers when I upgrade my case

Thanks, I Love 'em, one of the best fans IMO...

Do those graphics cards get hot?

I am only saying because there is little gap between them.

yeah they do haha, top card gets to the high 80s in 3D Mark

Looking awesome macarule!

Thanks MastyLR

Interesting place to mount 5 1/4 fan controller. Zip ties?

i needed a place to mount it... good old zip ties

 

[MatsyLR]

Does it not rattle around alittle with the zip ties holding it? o_o

 

[macarule]

it moves slightly if pushed to hard, but its pretty tight against the bottom of the 5.25" bays

 

[bobo696]

My case!

Not the best cable management though, I'll try to do better, but the 5V cable of my hx620w is to short

http://www.hostingpics.net/viewer.php?id=218643P1040772.jpg

EDIT: I tried the insert image function but it doesn't work ?

 

[MatsyLR]

Just tested using ur screen, doesn't work for me either, odd.
Anyway, looks nice man, you dont need fancy cable management

 

[scrlk]

My case!

Not the best cable management though, I'll try to do better, but the 5V cable of my hx620w is to short

http://www.hostingpics.net/viewer.php?id=218643P1040772.jpg

EDIT: I tried the insert image function but it doesn't work ?

Use imgur, it's the best.

 

[bobo696]

Thanks mate!

A more beautiful graphics card should arrive in the next few weeks/months !

 

[MatsyLR]

^ What card?

 

[bobo696]

^ What card?

I don't know yet but I like AMD
so something between 7850, 7870, 7950, 7970...

 

[IronWarrior]

Maybe not the inside, but this is my current setup till I can stop the motherboard from shorting out inside the case.

 

[matty15]

Nearly finished with this
Just waiting on..
6pin red bitfenix cable.
two 120mm Corsair AF120 for the push pull
And finally treated myself to come Corsair Dominator GT ram 8GB

Fully lights up red inside now too thanks to two pairs of bitfenix LED strips but i'll get better pictures and show you when its all together

Are you using different fins for the dominators?

EDIT: Nvm, didnt realize you've only just ordered them

 

[matty15]

Custom paint job by myself, and I've now re-sleeved the 24pin power cable so the coloured cables aren't showing like in the picture. Also ive added grommets which aren't in the picture either. Will take another one when I install my n520 cooler (need to buy a mounting bracket for LGA1155)