****Show Us The inside of your Case!****
- Thread starter Camoe
- Start date
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
Got this going on so far with my new power supply which game today xD still need to replace that stock cooler.. its like a typhoon in the middle of a playground.
Associate
- Joined
- 16 May 2011
- Posts
- 1,308
- Location
- Staffordshire
Got this going on so far with my new power supply which game today xD still need to replace that stock cooler.. its like a typhoon in the middle of a playground.
Yep, now just need to take out that HDD, fit an SSD in the side panel, stick a 200mm rad in the front and a 240 in the top then a nice small pump and res with the relevant blocks and your good to go!
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
Yep, now just need to take out that HDD, fit an SSD in the side panel, stick a 200mm rad in the front and a 240 in the top then a nice small pump and res with the relevant blocks and your good to go!
Hahah Thats the plan xD in a month and a bit when i got the money to buy the whole waterkit and the ssd xD
My Antec P183 v3, I don't like how huge this thing looks with my little mATX Gene IV inside, I want a really nice compact mATX case that is easier to transport.
http://i89.photobucket.com/albums/k233/Jaybrean/3-1.jpg
http://i89.photobucket.com/albums/k233/Jaybrean/3-1.jpg
Last edited:
Associate
- Joined
- 10 Jul 2010
- Posts
- 1,981
- Location
- Gtr London
My new build
What case is that btw? Just curious!
Also rare to see another Thermaltake/FRIO user... Those coolers perform really really well, but they always make them look kinda cheap. (I have an older FRIO myself that I modded with carbon fibre/removal of certain bits).
Xigmatech Midgard II. I like the looks of the Frio. They keep my i5 3570k just under 80C primed at 1000rpm which is great
Associate
- Joined
- 10 Jul 2010
- Posts
- 1,981
- Location
- Gtr London
Xigmatech Midgard II. I like the looks of the Frio. They keep my i5 3570k just under 80C primed at 1000rpm which is great
Case looks fairly decent on the couple of reviews I flicked through, quite interested in it for myself! Hate the looks of my Zalman Z9!
Well, ive had a productive day "working from home" today
and swapped out my CPU block with an EK Supreme HF (bought from the MM):and installed the new loop and Phobya 150 Balancer Res :
The Blue LED in the res is just a temporary one until the white one arrives
Man of Honour
- Joined
- 17 Feb 2003
- Posts
- 29,640
- Location
- Chelmsford
^^ Very nice mate.. Any difference in temps?
New build, from a few weeks.
In the middle of my build log
New build, from a few weeks.
In the middle of my build log
Thanks mate, yours ain't to shabby either
TIM is still bedding in but at least 1 degree lower idle and a full night of prime blend it didn't go over 70 (overclocked to 4.6) which is getting on for 10 degrees less :O
Very happy
TIM is still bedding in but at least 1 degree lower idle and a full night of prime blend it didn't go over 70 (overclocked to 4.6) which is getting on for 10 degrees less :O
Very happy
Associate
- Joined
- 1 Jan 2012
- Posts
- 1,946
- Location
- Scottish Borders - UK
Here you go....
Still a work in progress, but very nearly finished.
AX750 PSU will be with me tomorrow. Then some red coolant dye and a window cut into the side panel.
Still a work in progress, but very nearly finished.
AX750 PSU will be with me tomorrow. Then some red coolant dye and a window cut into the side panel.
how is that gpu mounted like that and where can I get one from?Here you go....
Still a work in progress, but very nearly finished.
AX750 PSU will be with me tomorrow. Then some red coolant dye and a window cut into the side panel.