SSUPD MeshLicious (from the makers of the FormD T1)

Vertigo1 said:
I have an X63 in my main box and would probably go with the same.

This rig will be a secondary and I've been grabbing bits as and when they're available so I still need a mobo, CPU, SSD & AIO lol.
Click to expand...

I got my Z63 for £151 delivered from a forest (it was open box but had all the accessories and protective film on everything and original thermal paste)
 
As I need both a PSU and looking at getting an AIO. I've seen some videos online talking about thicker AIO's causing issues for PSU/cabling. Any recommendations? Can see mention of some of NZXT models and also seen some videos using Corsair AIOs.
 
I'd be keen to find out whether the arctic freezer 2 280mm AIO had any fitment issues here. Seems the best option if you don't want the RGB stuff
 
Mine has arrived! White, mesh, PCIE 3.0

9f773f143eb99e53a2fbd5b50c4ebe7e.jpg
 
DatV8 said:
I'd be keen to find out whether the arctic freezer 2 280mm AIO had any fitment issues here. Seems the best option if you don't want the RGB stuff
Click to expand...

I've seen that the Freezer 2 fits very snug but I have heard the hoses from the pump block need to be bent quite sharply and zip tied to get the side panel on
 
nade said:
As I need both a PSU and looking at getting an AIO. I've seen some videos online talking about thicker AIO's causing issues for PSU/cabling. Any recommendations? Can see mention of some of NZXT models and also seen some videos using Corsair AIOs.
Click to expand...

Ive got the Kraken Z63 AIO going in mine with a corsair SF750 PSU. Ive also got some longer standoffs on the way to space the motherboard off the spine to give some breathing room for cables through the middle
 
PurePickage said:
Ive got the Kraken Z63 AIO going in mine with a corsair SF750 PSU. Ive also got some longer standoffs on the way to space the motherboard off the spine to give some breathing room for cables through the middle
Click to expand...
Thanks, i'll have a look a the Z63.

Also going to look at replacement feet to try and get more clearance under the case.
 
PurePickage said:
I've seen that the Freezer 2 fits very snug but I have heard the hoses from the pump block need to be bent quite sharply and zip tied to get the side panel on
Click to expand...

Thanks, does look like there's only so far the hoses bend. The NZXT X63 also looks like an option with hoses mounted on the side of the block and not the top
 
DatV8 said:
Thanks, does look like there's only so far the hoses bend. The NZXT X63 also looks like an option with hoses mounted on the side of the block and not the top
Click to expand...

Indeed and with both the X and Z 63's you can mount them any way round you want. The Z you rotate the screen in the software and the X has a rotational bezel so the logo is always the right way up
 
nade said:
Thanks, i'll have a look a the Z63.

Also going to look at replacement feet to try and get more clearance under the case.
Click to expand...

PurePickage said:
Could always get some rubberised feet that stick on with double sided sticky tape. Like these https://www.ebay.co.uk/itm/124482483693?hash=item1cfbbbf5ed:g:R5cAAOSwu2dgQ1rZ

I used the black ones of these on my corsair 280x to raise it up a bit
Click to expand...

SSUPD actually have a downloads section on their website with a few different feet designs that can be 3D printed.

https://ssupd.com/pages/download
 
nade said:
That sucks. My box had a little bit of damage on one side where the box gap/handle is. Was that what's happened with yours?
Click to expand...

Gouge/hole in the top of one of the long sides. Whatever penetrated the box has dented the case.

Cheeky **** delivery driver put it down in the porch with the damage facing away from me before taking his pic and legging it. Had I spotted it sooner I'd have refused delivery, now I've had to raise a webnote and go through the faff of returning etc.
 
You must log in or register to reply here.
Back
Top Bottom