The Fury(X) Fiji Owners Thread

Lokken86 · 18 Nov 2015 at 21:35

Gregster said:
So does voltage help now? Are we seeing some decent clocks?

Iv only tested it up to 1120/550 on a fury pro. Just a paltry 30mhz over my previous and albeit unstable 1090. I think itl be lucky to hit 1140 but I shall give it a try anyway.

Gregster · 18 Nov 2015 at 21:38

Lokken86 said:
Iv only tested it up to 1120/550 on a fury pro. Just a paltry 30mhz over my previous and albeit unstable 1090. I think itl be lucky to hit 1140 but I shall give it a try anyway.

That's a shame and whilst I wasn't really expecting big clocks with voltage, I was hoping to be wrong.

Spec-Chum · 18 Nov 2015 at 21:44

Kaapstad said:
Welcome

Copied this into the Fury Pro owners thread.

The what thread?

JediFragger · 18 Nov 2015 at 22:27

LoadsaMoney said:
lol

That's a yes then

Hopefully it'll scale quite linearly (better than the Ti) due to the architectural restrictions...

Orangey · 18 Nov 2015 at 22:47

Gerard said:
The "overclockers dream" thing i always put down more to the cooler, he said it was designed for 500 watts and the board only drew 275 on average so it had a lot of headroom.

He said 600 amps referring to the power delivery or something.

JediFragger · 18 Nov 2015 at 22:49

Orangey said:
He said 600 amps referring to the power delivery or something.

Wish the dude kept his mouth shut tbh, sick of hearing it now

Gerard · 18 Nov 2015 at 22:59

Orangey said:
He said 600 amps referring to the power delivery or something.

His exact quote was:

"We built these for the overclockers, for the gamers, we got a 6 phase 400 amps of power, its amazing you're gonna be able to overclock this thing like no tomorrow with the cooling solution, this is an overclockers dream".

Vid below plays from where he said it.

Lokken86 · 18 Nov 2015 at 23:00

Will they allow for more than 75mv in the future? Think iv stalled at 1120 but with 150mv I'm sure 1150 is achievable hehe. Possibly 1220 for the x version

GoogalyMoogaly · 18 Nov 2015 at 23:32

Spec-Chum said:
The what thread?

It's the thread for owners of the non-X version of the Fury X, which is commonly called the 'pro' to avoid confusion as it was codenamed the "Fiji PRO" as opposed to the "Fiji XT". This thread is technically for owners of the Fury X card, so Kaap was just saying he's added you to the owners list in that thread.

Kaapstad · 19 Nov 2015 at 00:59

Spec-Chum said:
The what thread?

This one.

http://forums.overclockers.co.uk/showthread.php?t=18680969

Zeed · 19 Nov 2015 at 21:41

So anybody messing about with Overclockers dream ??

Kaapstad · 20 Nov 2015 at 08:22

Lord_ZED said:
So anybody messing about with Overclockers dream ??

Trixxx does not work with my cards, I will have to wait for afterburner to get vc.

HardStyler3 · 20 Nov 2015 at 13:16

friend of mine got 1150mhz and 550mhz stable on hbm with +50mv

he will try 1200mhz with +75mv later

Zeed · 20 Nov 2015 at 16:20

Kaapstad weird :/ Guess AB wont come out this months :/

LtMatt · 23 Nov 2015 at 21:18

Unwinder said:
Dear forum visitors,

I'm happy to announce that 4.2.0 is entering closed beta testing stage tomorrow. Hope that closed testing will take around a week as usual, then we release publicly.
After releasing 4.2.0 I'll focus on major RTSS update. The main priorities will be Mantle and DX12 support.

Source
http://forums.guru3d.com/showpost.php?p=5193774&postcount=83

Exciting.

LoadsaMoney · 23 Nov 2015 at 22:40

Overclockers dream!

JediFragger · 23 Nov 2015 at 22:47

Almost 1200Core will soon be possible people, start salivating!!!

Gerard · 23 Nov 2015 at 22:53

AMDMatt said:
Source
http://forums.guru3d.com/showpost.php?p=5193774&postcount=83

Exciting.

Is it?

Its pretty obvious by this point the core hasn't much head room like most of the previous recent amd releases.

GoogalyMoogaly · 23 Nov 2015 at 23:04

AMDMatt said:
Source
http://forums.guru3d.com/showpost.php?p=5193774&postcount=83

Exciting.

Mantle support?
No Vulkan support?

Scougar · 24 Nov 2015 at 03:43

So how much quicker are these cards now they are volted?