**THE NVIDIA DRIVERS THREAD**

[BS Dave]

I see so many complaints about Afterburner nowadays.

fine for my Titan pascal. Must just be the new cards.

 

[Neil79]

GeForce Hotfix Driver Version 460.97

The hotfix addresses the following issues:
Some apps that use NVML may not detect GPU [3200758]
Stutter may be observed with some configurations in Marvel's Avengers [3197999]
Lenovo Y740 may display corruption on waking from sleep [3178279]
Some notebooks may BSOD when waking from sleep while connected to external monitor via dock/dongle [3162411]
With HDR enabled, black levels are incorrect. [200682795]

Forum Discussion from Guru
https://forums.guru3d.com/threads/geforce-hotfix-driver-version-460-97.435791/
or
https://forums.guru3d.com/threads/geforce-hotfix-driver-version-460-97.435793/

Driver link
https://nvidia.custhelp.com/app/answers/detail/a_id/5145

 

[Jay85]

After burner is causing the problems with my MSI card.

Uninstalled it now and everything is back to normal.
I did try the beta, but the same things happen

I tried EVGA X1 but the fan curve does not show.
I just get a blank screen.

What other monitoring software with fan curve is there?
Thanks

I've been using Argus monitor for some time now and its brilliant. Control all my fans via that now, theres a free version you can use or just pay a small fee for a 2 year licence i think. Been using the free version without issues, fan curve is great!

 

[deuse]

I've been using Argus monitor for some time now and its brilliant. Controller all my fans via that now, theres a free version you can use or just pay a small fee for a 2 year licence i think. Been using the free version without issues, fan curve is great!

Will look in to that.

Thanks.

 

[V F]

GeForce Hotfix Driver Version 460.97



Forum Discussion from Guru
https://forums.guru3d.com/threads/geforce-hotfix-driver-version-460-97.435791/
or
https://forums.guru3d.com/threads/geforce-hotfix-driver-version-460-97.435793/

Driver link
https://nvidia.custhelp.com/app/answers/detail/a_id/5145

Installed at 1am, played Division 2 for 6 hours. Solid as the previous driver I was on 452.22 for the 1080Ti. No loss or gains on performance but it did feel smoother for Division 2.

 

[LoadsaMoney]

Hotfix! Hotfix!

 

[jinxpad]

Is there any performance loss since? Bit skeptical of Nvidia's latest drivers. I'm using 1080 Ti as well. Driver gimping taking place ?

Not that I've noticed, seems more stable tbh, but might be just placebo. Definitely no perf. drop for me at least.

 

[Boomstick777]

Not that I've noticed, seems more stable tbh, but might be just placebo. Definitely no perf. drop for me at least.

Cheers, I don't think it will be an issue now, got a 3070 coming so 1080 Ti gimping no longer applies to me xD

 

[Ree]

well this doesn't look good av been sitting like this for nearly 10 mins trying to install the hotfix.

nvm i just restarted windows and it looks like it hasn't attempted to install at all thankfully. gonna swerve this one me thinks.

 

[spluff]

Is the latest ok for 3080 owners?

if you have afterburner underclock do you need to do anything before installing? (Normally just install)

 

[K4Y84]

Dont forget last version of Afterburner Beta shows something like Sept 2020 so it will have been released before these new cards were out there.

4.6.3 Beta 4 came out about 3-4 weeks ago.

 

[Jay85]

4.6.3 Beta 4 came out about 3-4 weeks ago.

Have you used it? any improvements over the previous?

 

[K4Y84]

Have you used it? any improvements over the previous?

I've been using it with my 3080 FE since it came out. Works fine to OC to +120 core, +500mem, +100% voltage, 115% power, 1/1 fan curve. Although I have once or twice had it lose my saved profiles.. so not exactly perfect.

 

[Jay85]

I've been using it with my 3080 FE since it came out. Works fine to OC to +120 core, +500mem, +100% voltage, 115% power, 1/1 fan curve. Although I have once or twice had it lose my saved profiles.. so not exactly perfect.

Hmm im not sure which beta im using, might have been the initial september one as the OC scanner is still abit on/off sometimes. But manual overclock works fine and the saved profiles always load up on startup. I've managed a +190 core and + 750 mem on my palit 3090 for benching and around +150/+500 for gaming.

I suppose i can always revert back if its glitchy.

 

[varkanoid]

4.6.3 Beta 4 came out about 3-4 weeks ago.

I looked last night and the link to Beta 3 on Guru3d forum doesnt work and there is no mention of Beta 4.

From what I read Beta 3 got withdrawn and Beta 4 is only available if you know the link of EVGA forums

 

[smogsy]

I looked last night and the link to Beta 3 on Guru3d forum doesnt work and there is no mention of Beta 4.

From what I read Beta 3 got withdrawn and Beta 4 is only available if you know the link.

you mean this link? download-eu2.guru3d.com/afterburner/[Guru3D.com]-MSIAfterburnerSetup463Beta4Build15910.rar

 

[varkanoid]

you mean this link? download-eu2.guru3d.com/afterburner/[Guru3D.com]-MSIAfterburnerSetup463Beta4Build15910.rar

Yes its off the EVGA forum but as far as I can see its not on the official forum. Only beta 2.

Apparently

Beta 4 does the following
- Added Zen3 CPU monitoring
- Added internal "Memory usage / process" and "RAM usage / process" graphs based on async process performance counter access interface introduced by the latest RTSS. Unlike GPU.dll plugin, those sources support in-process VRAM and RAM reporting for EAC/BattlEye protected and UWP titles.
- RTSS has been upgraded to the latest 7.3.0 beta 9

 

[spluff]

Is the latest drivers ok for 3080 owners?

if you have afterburner underclock do you need to do anything before installing? (Normally just install)

can someone answer?

 

[smogsy]

can someone answer?

its been fine on 3090. would close msi afterburner down during install thats about it

 

[spluff]

its been fine on 3090. would close msi afterburner down during install thats about it

Cool thanks.. do I need to remove the underclock (press reset button in AB)?