***The Official OcUK Lego Thread***

[{SAS}TB]

And done !

Some nice little touches

The front flaps open and utility "arms" come out

Pop out sensor

Removable head section with hidden light saber hilt

"Name plate" compete with mini fig

Only gripe is the sticker .....

Plenty of spares

And, randomly, two spare minifig bodies

 

[Haze]

Sorry about the potato cam pic, but can anyone tell me the part name pelase

 

[steve45]

Difficult to confirm without scale, However I'd hazard a guess at Part 3737b Technic Axle 10 (threaded)

 

[{SAS}TB]

Difficult to confirm without scale, However I'd hazard a guess at Part 3737b Technic Axle 10 (threaded)

Looks very similar !

 

[Haze]

Brilliant thanks

 

[BUDFORCE]

Check the following two sites for loads of train and track options:-

https://joooooy.com/collections/tra...1&_sid=9119abbf4&_ss=r&variant=43483640463581

Thanks for this, stuff turned up today, so what about a week and a half? I don't think that's too bad considering it came half way across the planet.

The track is good quality and fits with the Lego stuff just fine.

I also ordered a couple of very small bits, signal towers etc, and actually you can tell the quality of the bricks isn't quite as good as the official stuff, again though perfectly fine.

Cheers.

 

[ThundyCat]

The UCS Tie interceptor coming out May 4th looks great.

View this content on Instagram

View this content on Instagram

 

[{SAS}TB]

The UCS Tie interceptor coming out May 4th looks great.

It does!

 

[b0rn2sk8]

The Droideka looks epic as well.

 

[GSXRMovistar]

And done !

That looks pretty decent, I ended up picking up a copy of the UCS Falcon for £120 from Marstoy, so far the quality has been decent and its an interesting build, although not a clue where I'm going to put it once done.

 

[CaptainRAVE]

The Droideka looks epic as well.

Think I may get that, pretty cheap by Lego standards.

 

[{SAS}TB]

That looks pretty decent, I ended up picking up a copy of the UCS Falcon for £120 from Marstoy, so far the quality has been decent and its an interesting build, although not a clue where I'm going to put it once done.

It is HUGE! Get some pics posted

 

[GSXRMovistar]

It is HUGE! Get some pics posted

Didn't think to take pics as I was building it, here's its current state:



So far its straight forward enough and a lot easier than the MouldKing ISD Monarch that I've done previously.

 

[{SAS}TB]

Didn't think to take pics as I was building it, here's its current state:



So far its straight forward enough and a lot easier than the MouldKing ISD Monarch that I've done previously.

Brill, thanks !

 

[MissChief]

Are the UCS models all roughly the same scale? The X-Wing and TIE Interceptor specifically?

 

[theone8181]

Are the UCS models all roughly the same scale? The X-Wing and TIE Interceptor specifically?

Fighters might be, but not the bigger ones. The stay destroyer wouldn't fit in a room otherwise .

 

[MissChief]

Fighters might be, but not the bigger ones. The stay destroyer wouldn't fit in a room otherwise .

Perhaps I should have specified the single or dual person fighters!

 

[ci_newman]

Yes, it’s pretty normal, particularly if it gets direct sunlight.

Sadly mine did it from indirect sunlight too. I now keep it up on a high shelf where I can't see the yellowing quite so much. A shame as its one of my favourite display pieces.

 

[ci_newman]

Sell it, someone will take it.

Edit: I’m sure I’ve seen some people cure some yellowing, might be worth a Google.

It's very difficult with the Saturn because of the printed items (flags etc) as those are liable to fade with the hydrogen peroxide treatment too. Reportedly it can make the parts more brittle too. In this case, it would have been better for the pieces to be stickers rather than printed, as you could just reapply them.

 

[Matt-Page]

Does anyone know of anywhere you cans still buy the Batmobile? The one from the first 2 with Michael Keaton?