***The Vapers Lounge*** 2.0

Status
Not open for further replies.
So does anyone own a velocity rda? Tempted to give dripping another go.

Or anything else people would recommend?

I have two of those and I love them for the simple reason that they are the easiest RDAs to build on. The flavour is good and I like that I can screw the airflow down over the holes when I pop it in my pocket, thus stopping juice from potentially running out.

It's a great RDA.
Can someone look over this shopping list and see if it's okay or do you recommend anything else other than the Kanger subbox?

- Authentic Kanger SUBOX Mini Black Starter Kit
- Authentic XTAR VC2 2 Slots Li-ion USB Battery Charger w/ LCD Display
- Authentic Samsung 2A USB AC Wall Charger Travel Adapter (UK Plug)
- Authentic Muji Rectangle Cotton Wick for RDA RTA RBA Rebuildable Atomizers (10-Pack)
- Authentic Samsung INR18650-25R 3.6V 2500mAh Rechargeable Li-ion Batteries (4-Pack)
- Authentic SMOK TFV4 Sub Ohm Tank Clearomizer Kit
- Total $125.83

All from FT, looking to place an order today so quick replies would be great :D

Look OK but buy your batteries locally from someone like Torchy. Fasttech takes ages if there are batteries involved.
The Muji cotton you can buy a mahoosive amount direct from Muji for next to nothing so I'd forget FT for that too.
 
Look OK but buy your batteries locally from someone like Torchy. Fasttech takes ages if there are batteries involved.
The Muji cotton you can buy a mahoosive amount direct from Muji for next to nothing so I'd forget FT for that too.

ok cool, i'll take that cotton out from the basket. Got a link for muji cotton?
Also what wire will I need to build coils?

edit - is it this

http://www.muji.eu/pages/online.asp?Sec=17&Sub=70&PID=4479

edit - order placed for everything now, changed the battery to a 2 pack and got the cotton direct for just under a fiver for 140 pads. Now I need to find fruity juice for him that doesn't taste like perfume. Any good recommendations for strawberry, melon or apple flavours please?
 
Last edited:
+1 for getting batteries from the UK or you will be 96 years old by the time its delivered

Yes thats the cotton.

I would recommend maybe some 27 AWG its in the middle range and quite easy to build with not to thick and not too flimsy. I would get a few spools of different thickness' though its cheap enough
e.g http://www.wireandstuff.co.uk/produ...ron---27-AWG-----FeCrAl-alloy--17.html#SID=58

I've ordered the batterys anyway. If he gets the stuff before the battery then I will just give torchy a shout.

Is there a new way to make coils or is the wrap around a drill bit still the best way to make them?

I will need to make coils for him so the wire will come to me and I will make a 100 so that will be enough for a good few years, I remember one used to last me 6 months.

edit - kuro coil making tool is what I need
 
Last edited:
I've ordered the batterys anyway. If he gets the stuff before the battery then I will just give torchy a shout.

Is there a new way to make coils or is the wrap around a drill bit still the best way to make them?

I will need to make coils for him so the wire will come to me and I will make a 100 so that will be enough for a good few years, I remember one used to last me 6 months.

edit - kuro coil making tool is what I need

Did you order them separate?

If not it will hold the hole package up as it has to come across land via donkey/camel

Yeah Kuro Coiler will do the trick, from what I have heard the clones are crap but the real one is easy life
 
Can someone look over this shopping list and see if it's okay or do you recommend anything else other than the Kanger subbox?

- Authentic Kanger SUBOX Mini Black Starter Kit
- Authentic XTAR VC2 2 Slots Li-ion USB Battery Charger w/ LCD Display
- Authentic Samsung 2A USB AC Wall Charger Travel Adapter (UK Plug)
- Authentic Muji Rectangle Cotton Wick for RDA RTA RBA Rebuildable Atomizers (10-Pack)
- Authentic Samsung INR18650-25R 3.6V 2500mAh Rechargeable Li-ion Batteries (4-Pack)
- Authentic SMOK TFV4 Sub Ohm Tank Clearomizer Kit
- Total $125.83

All from FT, looking to place an order today so quick replies would be great :D

Are you planning on running the TFV4 on the subox, because it wont have enough power for the quad or triple coil heads.... you need at least 50w minimum to even get the coils producing vapor.
 
Are you planning on running the TFV4 on the subox, because it wont have enough power for the quad or triple coil heads.... you need at least 50w minimum to even get the coils producing vapor.

The Kanger is rated at 50Watts

Standard 510 drip tip
Uses standard 0.5ohm OCC heads
OCC 0.5 ohm, direct lung inhale from 15W-50W
OCC 1.5ohm, mouth to lung inhale from 10W-26W
Improved RBA which will work better in higher wattages and apparently easier to work on
New airflow design on the Subtank Mini
Fires down to 0.3ohms
Maximum output is 50 watts

Did you order them separate?

If not it will hold the hole package up as it has to come across land via donkey/camel

Yeah Kuro Coiler will do the trick, from what I have heard the clones are crap but the real one is easy life

Yup separate order.
 
at 50w, the quad coil will work and produce a cool vap.. it really starts to get a lot better once you go over 50w.. so just want you to be aware... 50w is not really enough to do it justice and you might find yourself looking for something more powerful, its not a beginner tank for sure.

The Quad coil is 0.15 ohms and the triple is .02 ohms, not sure the subox can even fire that low?
Your info states 0.3 ohms is the lowest.
 
Hi All,

Going to pick up some titanium wire in the next 24 hours online.
Can anyone recommend the type/AWG to go for, what ohms have people had the best outcomes at?

For use on an iStick40W & IPV D2, both fire at 0.05 a piece IIRC in TC mode.

Looking at Crazy Wire's selection at the moment.

Was going to aim for .2ohms ove ra 2mm bit needing 6 wraps each coil, does this sound about right?

http://www.steam-engine.org/coil.asp?mat=ti1&s=dp&r=0.2&awg=29&id=2.01
 
Last edited:
Hi All,

Going to pick up some titanium wire in the next 24 hours online.
Can anyone recommend the type/AWG to go for, what ohms have people had the best outcomes at?

For use on an iStick40W & IPV D2, both fire at 0.05 a piece IIRC in TC mode.

Looking at Crazy Wire's selection at the moment.

Was going to aim for .2ohms ove ra 2mm bit needing 6 wraps each coil, does this sound about right?

http://www.steam-engine.org/coil.asp?mat=ti1&s=dp&r=0.2&awg=29&id=2.01
You want medical grade 1 Ti

I have a spool of this in 26 gauge coming tomorrow hopefully

http://www.stealthvape.co.uk/index.php?route=mobile_store/product&fspath=90&product_id=449
 
at 50w, the quad coil will work and produce a cool vap.. it really starts to get a lot better once you go over 50w.. so just want you to be aware... 50w is not really enough to do it justice and you might find yourself looking for something more powerful, its not a beginner tank for sure.

The Quad coil is 0.15 ohms and the triple is .02 ohms, not sure the subox can even fire that low?
Your info states 0.3 ohms is the lowest.

I think it was the wrong atty for the Kanger, I'm going to see if I can cancel that part of the order.
Edit - Was as simple as clicking cancel on that line item.
 
Got bored of trying to find a flavour l like, too much choice was making me head spin.

Have ordered up some Red Astaire again, got a good deal n the VPG, was down from £3.87per 100ml to £2.50 so ordered 4 and some of concentrate.

Have loads of flavours left so with the remainng 60ml I think I'll try knock up some vanilla custard.
 
Hi All,

Going to pick up some titanium wire in the next 24 hours online.
Can anyone recommend the type/AWG to go for, what ohms have people had the best outcomes at?

For use on an iStick40W & IPV D2, both fire at 0.05 a piece IIRC in TC mode.

Looking at Crazy Wire's selection at the moment.

Was going to aim for .2ohms ove ra 2mm bit needing 6 wraps each coil, does this sound about right?

http://www.steam-engine.org/coil.asp?mat=ti1&s=dp&r=0.2&awg=29&id=2.01

Using the .40mm stuff nova linked.

Aim for 0.2-0.3ohm, usually 4-6 wraps on 2-3mm will get you in that region, currently have 5.5wraps on 3mm coming out at 0.272ohm, vapes superbly. Remember to space your coils and not to dry burn :)
 
Hi All,

Going to pick up some titanium wire in the next 24 hours online.
Can anyone recommend the type/AWG to go for, what ohms have people had the best outcomes at?

For use on an iStick40W & IPV D2, both fire at 0.05 a piece IIRC in TC mode.

Looking at Crazy Wire's selection at the moment.

Was going to aim for .2ohms ove ra 2mm bit needing 6 wraps each coil, does this sound about right?

http://www.steam-engine.org/coil.asp?mat=ti1&s=dp&r=0.2&awg=29&id=2.01


For single coils go for 24awg TI wire, about 4-5 spaced wraps around a 3mm bit will get you around 0.2ohms, and if you want to do dual then go for 26awg TI.. always go for grade 1 TI.
 
Got bored of trying to find a flavour l like, too much choice was making me head spin.

Have ordered up some Red Astaire again, got a good deal n the VPG, was down from £3.87per 100ml to £2.50 so ordered 4 and some of concentrate.

Have loads of flavours left so with the remainng 60ml I think I'll try knock up some vanilla custard.

What is a good watermelon, apple or strawberry flavour with high vg content for cloud chasing? I used to buy stuff from vapeking but I think it was a conspiracy that he made his juices very watery so that they wicked really fast and finished within a day lol His juices were decent though.
 
Using the .40mm stuff nova linked.

Aim for 0.2-0.3ohm, usually 4-6 wraps on 2-3mm will get you in that region, currently have 5.5wraps on 3mm coming out at 0.272ohm, vapes superbly. Remember to space your coils and not to dry burn :)

For single coils go for 24awg TI wire, about 4-5 spaced wraps around a 3mm bit will get you around 0.2ohms, and if you want to do dual then go for 26awg TI.. always go for grade 1 TI.

I concur.
This is exactly how I coil ti.

Was going to post a video I watched last night but cant find it now.

The dude was saying no need to space coils with Ti especially if your mod has a setting for it. You can also use a low wattage to heat the coil so you can nip it together, you wont get it anywhere near hot enough to produce oxide. I will give it a try tonight.
 
What is a good watermelon, apple or strawberry flavour with high vg content for cloud chasing? I used to buy stuff from vapeking but I think it was a conspiracy that he made his juices very watery so that they wicked really fast and finished within a day lol His juices were decent though.

I quite like Rockhopper, by Penguin for watermelon. I think it may only be 65% VG, though. Element Watermelon Chill is also nice, but has a bit on menthol in it, and it's 80% VG.

Again, for strawberry, look no further than Strawberry Whip, by Element. It's the best strawberry I've found yet, and have just ordered another two bottles.

Just my two pence, though, and your own results may vary :)
 
I quite like Rockhopper, by Penguin for watermelon. I think it may only be 65% VG, though. Element Watermelon Chill is also nice, but has a bit on menthol in it, and it's 80% VG.

Again, for strawberry, look no further than Strawberry Whip, by Element. It's the best strawberry I've found yet, and have just ordered another two bottles.

Just my two pence, though, and your own results may vary :)

thanks it's expensive though £9 for 15ml :eek:
 
Status
Not open for further replies.
Back
Top Bottom