***The Vapers Lounge*** 2.0

Status
Not open for further replies.
I wouldn't. I'd say the Realeaux has 2,500mAh of power as it's 3 x 2,500mAh cells in series.

My RC multicopter batteries are 8,000mAh 6S batteries. They are described as 8,000mAh not 48,000mAh.

The Reuleaux uses 3x 18620 in Series, so mine currently has 3x 2100mAh cells, so as far as i am concerned it has 2100mAh... not 6300.

We need to get away from mAh and start thinking in Watt Hours... as that is the same for both 18650 or Lipo cell.

So a 2500mAh 18650 = about 9wh
A 900mAh Lipo is also around 9wh

Simples :)

True, and I share the same view, but I wouldn't consider you laypeople when it comes to batteries and vaping, some people may see it and think 'why would I want this with 1500mAh when I have 3000 in my efests?!', and not understand or read the '3S' bit. It's marketing I guess. Watt-hours would make so much more sense though.

On a side note, got my mum a job at the local totallywicked, and she runs the shop now, soon to be two! Seems chuffed at the lack of stress compared to her last job, so I'm glad. RX200's are dropping in soon as well, will have to go check 'em out!
 
It's not 3S3P. It's 3S1P.
But where does it say that though? If it is indeed 4500mah total capacity is has to be a 3s3p. If the below* is part of the batteries documentation the description/explanation could be a misunderstanding of whoever transferring the product details.

* 1*3S Lipo 1500mAh Battery
 
Last edited:
And where does it say that though? If it is indeed 4500mah total capacity is has to be a 3s3p (if the below* is part of the batteries documentation).

The description/explination could be a misunderstanding of whoever transferring the product details.

* 1*3S Lipo 1500mAh Battery

Have you seen the size of a 2200 3s lipo, there is no way that mod could have a 4500 3s lipo inside, it would be massive. :eek: :D
That and anyone that knows the DNA200 board would know it takes a specific type of lipo or 3x 18650.
 
Have you seen the size of a 2200 3s lipo, there is no way that mod could have a 4500 3s lipo inside, it would be massive. :eek: :D
That and anyone that knows the DNA200 board would know it takes a specific type of lipo or 3x 18650.
Yes I have seen them, I also own RC.. Trex500 and cars. I should have looked at the mod dimensions and I'll muse over that shortly. I don't know the DNA specs but would it be fair to say then that running that mod at 200w for anyone mad enough to would get around 18-20 chuffs from it (power mode) :o
 
Last edited:
not sure how many puffs you would get, but you might not be that far out, at 55w and a 27wh battery setup i can get about 300, 2-3 seconds toots..
 
Yes I have seen them, I also own RC.. Trex500 and cars. I should have looked at the mod dimensions and I'll muse over that shortly. I don't know the DNA specs but would it be fair to say then that running that mod at 200w for anyone mad enough to would get around 18-20 chuffs from it (power mode) :o

The VT200 has a 1300mAh 3S pack in it and I easily get a day's use out of a single charge in TC mode.
 
I'll have to come back to thinking about this later, didn't sleep last night so brain far from being the sharpest at the moment.

Sensible use is bound to last far longer, only that angelDJ or what ever his name was on youtube would be a daft enough to run full power outside of TC.
 
Most tests I have seen online have shown the VT200 only has an 1100mAh 3s lipo at best, some tested as low and 950mAh. there are only two known mass market Cheap China DNA200 models that have the stated battery installed, the Hotcig and the Efusion, all the reset have been in question.
Take the VTBox200, supposedly an 1800mAh lipo, LMAO, not a chance, people running the Escribe battery analyser have seen otherwise.
But at 50w or under, in TC mode, the 900mAh in the hotcig has done me nearly a whole day but as the battery is detachable and i have a second spare, its not an issue.
 
Most tests I have seen online have shown the VT200 only has an 1100mAh 3s lipo at best, some tested as low and 950mAh. there are only two known mass market Cheap China DNA200 models that have the stated battery installed, the Hotcig and the Efusion, all the reset have been in question.
Take the VTBox200, supposedly an 1800mAh lipo, LMAO, not a chance, people running the Escribe battery analyser have seen otherwise.
But at 50w or under, in TC mode, the 900mAh in the hotcig has done me nearly a whole day but as the battery is detachable and i have a second spare, its not an issue.

Given the Physical dimensions of the pack in the VTBox200 then 1100mah makes the most sense, it is a couple of mm thicker than the Rhino 1050mah 40C pack I ran for a while in my DNA200.

I ran 200W in power mode on the DNA200, you just need a 28/30mm dripper like the Buddah or the Temple
 
Status
Not open for further replies.
Back
Top Bottom