***The Vapers Lounge*** 2.0

Status
Not open for further replies.
Have to say, the Black RX200 does look and feel much better than the DNA version, I do feel a little miffed at TW for not doing the DNA in Black, the silver and grey is dull.
 
Hector said:
You made a better job that the official videos did. Whats your view on the durability? does it feel like it might catch and peel or is it quite flush fitting?
Click to expand...

Thanks!

The skin does indeed fit flush & there are really no protruding edges of the skin to really worry about, Zapwrapz did a great job on this one.

The only thing that was a bit fiddly was getting the air bubbles out of the battery cover section.

Cheers all
 
roman59 said:
Thanks!

The skin does indeed fit flush & there are really no protruding edges of the skin to really worry about, Zapwrapz did a great job on this one.

The only thing that was a bit fiddly was getting the air bubbles out of the battery cover section.

Cheers all
Click to expand...
Cool, might get one in wood and black brushed for the black RX. Don't think i'll bother doing top or bottom though..
 
Just tried sub ohm for the first time, it's like the first ever cigarette I smoked.

It's literally knocked me for six, gonna have to drop mg levels I think, definitely didn't enjoy it
 
Last edited:
You vape the juice you like, 50/50 is fine for sub ohm, but def drop to 6mg, your direct lung inhaling so get a bigger hit and thus dont need as much nic in your juice.
If you find its rough on your throat then try a higher VG mix.
 
UKDTweak said:
You vape the juice you like, 50/50 is fine for sub ohm, but def drop to 6mg, your direct lung inhaling so get a bigger hit and thus dont need as much nic in your juice.
If you find its rough on your throat then try a higher VG mix.
Click to expand...
This is also my view too.

I DIY my juice to 65%VG to make it a tad smoother, 1.2% (12mg/ml) for my Squape and 0.6% for drippers and sub ohm RTA's .

What wire are you using ReltonBFD? Edit: or is it a Pre-built coil head? I.e kanger subtank mini 0.5ohm ..
 
Last edited:
Hector said:
This is also my view too.

I DIY my juice to 65%VG to make it a tad smoother, 1.2% (12mg/ml) for my Squape and 0.6% for drippers and sub ohm RTA's .

What wire are you using ReltonBFD? Edit: or is it a Pre-built coil head? I.e kanger subtank mini 0.5ohm ..
Click to expand...


Prebulit mate Ni200 coils for the sigelei pro tank, gonna look at another tank once I get abit used to sub and if I enjoy it once I try a different mg level.

Been running at 35w @210degrees but it's way too strong so I'm just back to my vw until I get some other juice
 
Finally! Took three and a half weeks to get here but I've got it now :)

Organic_cotton.jpg
 
Definement on the DNA200 has been giving me a hard time the last couple of days. Twice I've now pick it up and had a toot on burnt cotton as its decided the resistance is now 0.04ohm higher than it was, using Atty lock to keep it behaving for now
 
Frozennova said:
Definement on the DNA200 has been giving me a hard time the last couple of days. Twice I've now pick it up and had a toot on burnt cotton as its decided the resistance is now 0.04ohm higher than it was, using Atty lock to keep it behaving for now
Click to expand...

Had that happen to me , turned out to be a poor wire connection.Wire was not trapped completely under the screw & the heating & cooling had loosened it's contact.
 
Had my Crius V3 for a week or so , after a few problems with the coils contacting the inner chamber with 2.5mm coils decided to use 2mm.
Crius is definitely a very very good tank ,airflow is excellent & i do like the air to come under the coils.
Deck is pretty easy to work on & the Velocity style posts a very good idea.I did use an Allen key to tighten them up & i did manage to cut a lead so now use the supplied screwdriver.
Top fill is easy to use & does not appear to pressure the tank (can cause leakage).
Juice flow another great idea & works as it should.
Wicking is the easiest i have used in a good while ,a little wick(just a hint of wick showing)produces excellent results.
2mm inner dia twisted 26gauge Titanium , 6 coils(contact coils) , Ohm's out @ .068 cold .
110w preheat , 70w & 425f.Airflow about 3/4's open & it throws clouds with great flavour.
Only problem is this means my 1 month old Aromamizer will be reduced to back up duties.
 
Hey guys, I'm finally going to make my first proper recipe today. :)

Can someone check my percentages here for a 5ml sample of apple pie. I've used Danneh's recipe, (the diluted one), plus added the Apple and Cookie using his suggested 4:3:1 ratio.

http://forums.overclockers.co.uk/showpost.php?p=28868557&postcount=9992

Do my figures look correct?

The cinnamon and marzipan though are coming out at 0.01grams, and though my scales are meant to go down to 0.01, I can only get them to read 0.03 lowest, so maybe I should leave those two out, or take a chance and add a drop for each and maybe blow my head off? :p I'm using all FA concentrates btw. Thanks.



Apple_Pie_recipe.jpg
 
Hey all

Where do you guys get your stainless steel wire from, looked on Stealthvapes but they don't appear to have any on their website.

Also what guage are you using for your coils?

Cheers all
 
roman59 said:
Hey all

Where do you guys get your stainless steel wire from, looked on Stealthvapes but they don't appear to have any on their website.

Also what guage are you using for your coils?

Cheers all
Click to expand...

Got mine 3 weeks ago from here http://www.wireandstuff.co.uk/

I bought these:
TMC Wire - 317L Grade Stainless Steel Wire - 0.35mm (350 Micron - 28 AWG) - 10 Metre Spool 1 £1.99
TMC Wire - 317L Grade Stainless Steel Wire - 0.4mm (400 Micron - 26 AWG) - 10 Metre Spool 1 £2.49
TMC Wire - 317L Grade Stainless Steel Wire - 0.5mm (500 Micron - 24 AWG) - 10 Metre Spool 1 £2.49

Total £6.97
 
Status
Not open for further replies.
Back
Top Bottom