***The Vapers Lounge*** 2.0

Status
Not open for further replies.
As UKD said, a 1000mah Lipo is pretty got for life, I used to get till around 3-4pm with one at around 50w,

I'm on around a day and half with 33% left on dual 18650s with a TI coil in the crown .

Unfortunately with the DNA200 you get power,size and battery life but you can only pick two, even with silly twisted 24awg dual coils with Titanium 133w is just about enough for the preheat
 
Last edited:
Watch a few Voutube videos to see whats involved, but i dont thinks its that hard at all, once youve wrapped a coil and built your first deck it gets easier and easier, plus with the likes of the Kuro coiler or Coilmaster coil kits, coli making is a piece of cake, the hardest part can be seeing what you are doing depending on your eyesight, as the youtube videos are zoomed in, the real deal can be a lot smaller, your working with wire thats near as thin or thinner than a needle, i have a magnifiying headset that help as my eyesight is long sighted in one eye and bugger all in the other so i find it a bit harder without the headset but can still do it if needs be.

Heres what i use:
6Tsx3GW.jpg
 
Last edited:
Frozennova said:
As UKD said, a 1000mah Lipo is pretty got for life, I used to get till around 3-4pm with one at around 50w,

I'm on around a day and half with 33% left on dual 18650s with a TI coil in the crown .

Unfortunately with the DNA200 you get power,size and battery life but you can only pick two, even with silly twisted 24awg dual coils with Titanium 133w is just about enough for the preheat
Click to expand...

Never simple is it lol!

I am using a Council Of Vapour Vengeance tank with the 0.2ohm coils in normal wattage mode and it is perfect for me. 55-65w is the sweet spot for high vg liquid so over 100w is over kill as i don't use TC mode. Sensible about the Li-Po needing charging compared to swapping out 2 18's. Just tried some free cad and its junk so back to hunting unless work will allow me access to Catia after work. Worth having a play!
 
I run mostly in TC and ive never used pre heat over 70w and i run dual 24awg TI coils, dual twisted 26awg coils and dual 25awg 317l SS coils, all running with 70w pre heat and around 50w normal power, i dont see any need to hit any of my TC coils with 133w... it ruins the vape if the pre heat is any more that 20w higher than the normal wattage as you can feel the rise and drop in power in the first second and i find that weird, kinda like pulsing and i hate mods that pulse.
 
Brackish said:
Never simple is it lol!

I am using a Council Of Vapour Vengeance tank with the 0.2ohm coils in normal wattage mode and it is perfect for me. 55-65w is the sweet spot for high vg liquid so over 100w is over kill as i don't use TC mode. Sensible about the Li-Po needing charging compared to swapping out 2 18's. Just tried some free cad and its junk so back to hunting unless work will allow me access to Catia after work. Worth having a play!
Click to expand...

If you only want a simple box mod then you're free to use my design. If you wanted it tweaked for slightly different dimensions then I can do that as well, only takes 15-20 mins to tweak
 
Just another vouch for a kuro coiler or coilmaster, whatever it is. :p I was awful at making coils freehand but they're perfect every time with the kuro coiler. Dual coil SS, 26AWG, 6 wraps with 2mm diameter in the Crius, reading at 0.17ohms and it's as close to the perfect vape that I've managed so far (I like a fairly warm vape).
 
RX200 arrived. Yeah....... Looks like the DNA200 version, feels like the DNA200 version, operates like a cheapo Chinese mod.

The menu and operation are very basic. You can't change the power in TC mode (200W only). Screen is very small.

I guess it's OK as a high-powered mod but it's not even close to the DNA200 for functionality. I wasn't expecting it to be like the DNA200 but it's even more basic than an eVic VTC Mini.
 
Rilot said:
RX200 arrived. Yeah....... Looks like the DNA200 version, feels like the DNA200 version, operates like a cheapo Chinese mod.

The menu and operation are very basic. You can't change the power in TC mode (200W only). Screen is very small.

I guess it's OK as a high-powered mod but it's not even close to the DNA200 for functionality. I wasn't expecting it to be like the DNA200 but it's even more basic than an eVic VTC Mini.
Click to expand...

I'm pretty sure you can change the power in TC mode, it's one of the button presses.

Have you checked the manual?
 
Last edited:
My m8 just got his RX200, you can change the watts, once you have pressed the Fire button three times to get into the TC mode you want, press the fire button 4 times to switch from the temp setting to the watt setting.. simples.

From the two tanks my m8 has, one with TI and one with SS, the mod is a little off, has to set the temp way higher than he should and also the power 10-15w higher to get the same vape he is used to getting on the DNA200..

Has tried out of the box with FW 1.03 and then after updating to FW 1.07...
 
4 quick clicks of the fire button to bring up the power setting in TC modes.

Edit: this post was sent via sweden, hence a tad late.

 
Last edited:
Status
Not open for further replies.
Back
Top Bottom