Think you might be thinking of a differnt kind of shop... or you confused B&M with S&M lol
***The Vapers Lounge*** 2.0
- Thread starter slick rick
- Start date
- Status
Think you might be thinking of a differnt kind of shop... or you confused B&M with S&M lol
Think you might be thinking of a differnt kind of shop... or you confused B&M with S&M lol
Haha, I'm at work so that was sent on my phone so I blame autocorrect for that one! Reminds me of one I seen online where some girl tried to tell her mum she had gum in her hair. No guesses as to what the message she accidentally sent was!
Yeah, I've got some in my freshly purchased MXV4 (lovely dripper btw!) tastes great, not too over powering either!
Think you might be thinking of a differnt kind of shop... or you confused B&M with S&M lol
LOL
Haha
Yeah, the 'Vaporized' place on union street, it is part of a small chain iirc but the juice selection is very good, better then most online retailers, price on juice isn't bad, I was £15.99 on the charlies chalk stuff, UKECIG sell the same stuff for £16.99! Should be good enough for me to pop in for liquid while my own is steeping, do buy 5 get 1 free on all liquid lines too.
Was just the branch manager in today, really nice bloke, very genuine, not pushy at all and knows his range very well. He was selling a guy a starter pack as I walked in, from what I heard he was giving the chap some sound advise.
Pricing all round was very good, for Aberdeen anyhow, makes a refreshing change from overpriced FT clones and dekang PG liquids that were used to
Even though £129 sounds astronomical for a 75w mod, looking into it, its a bit of a bargain really, especially if they have to buy and sacrifice VTC mini's in order to get all the gubbins' for their mods.
Full charge is upto 8.4v on good fresh batteries... with a .45 coil thats 156.8w ... what RDA have you got on it, guessing one with Big airflow...
Odd, I used steamengine on my phone and it came out at 144W using the same site (I was likely typing something in wrong
), but yeah, 156W at full charge!Twisted messes RDA, airflow wide open.
Have just put a stapled fused clapton single coil in the indestructible, to get a bit of a Jaybo theme going on
Well they sell it as a VTC Mini 60w, but im assuming if its the genuine mini board it will take the latest update to make it 75w and allow SS TC mode...
But yeah, allowing for the buying of a VTC Mini, £23 on FB, then printing the Mod and adding the Squonking 510, bottle and pipe, battery connections and time to strip the VTC Mini and then rebuild in the new box... not a bad bargain and overall cheap for a good 60/75w Squonker thats not a cheapo china mod.
They do an SX350J version and that does not require a doner mod and its 20 Euro's more expensive.
Odd, I used steamengine on my phone and it came out at 144W using the same site (I was likely typing something in wrong
Twisted messes RDA, airflow wide open.
Have just put a stapled fused clapton single coil in the indestructible, to get a bit of a Jaybo theme going on
Nice, ive treid the Twisted Messes RDA on a mates mod, has good airflow... wish i had the patience to try making a clapton coil but twisted coils do me well enough that ive never bothered..
Take the lazy mans route and buy a roll of the UD Clapton wire, iirc its 26/32 and comes in 10m spools, use it wherever I can tbh, it just about edges out SS316 as my fave wire.
I've made many many metres worth of my own claptons in the past and even since getting this claptoned wire, but truth be told this particular wire was a present from the GF
ordered from vapemeshco.My mate has that RDA on IPV4, I don't know why I went for the mutation... its not great. The Slurricane by Ruthless tastes like if you had a cigg and then afterwards drunk some very warm Rockstar Tropical Guava... I could have ordered the frozen forest from vapours oven.
I'm going to order the Twisted Messes, unless there's a different RDA with better airflow and same amount of space or more?
Im now £129 lighter, just ordered a Svapiamo VTC Mini Squonker....
Its a custom 3D printed box fitted with a squonking 510 and the board from a VTC Mini, so will do TC for NI/TI and SS... woohoo... cant wait.
Let me know your thoughts, im seriously tempted by one as i'm thinking of trying out RDA mods but dripping all the time would get pretty annoying to me i think.
Last edited:
Its not as bad, as you think, after couple days you don't even think about it anymore. The vapour production out of an RDA is ridiculous though!
Edit:
Didn't see your post, I didn't know B&M have eliquids etc? The mutation has very good airflow, but barely any space... the Slurrican imo is not what I was expecting when I read the description...Just back from aberdeens newest B&M £95 lighter
Not a bad place at all, granted they have no mechs and very few drippers, but the juice selection is out of this world.
Ended up with another 3 batteries for my rx200, a genuine mutation x v4, some Charlie's chalk dust wonder worm (this smells incredible), and bottles of ruthless slurricane and E Z does it which both smell brilliant too.
To top it off they have a reward system that gives you 7.5% back on your purchase.
BTW Let us know what you think of WONDER WORM E-LIQUID BY CHARLIE'S CHALK DUST
Last edited:
My mate has that RDA on IPV4, I don't know why I went for the mutation... its not great. The Slurricane by Ruthless tastes like if you had a cigg and then afterwards drunk some very warm Rockstar Tropical Guava... I could have ordered the frozen forest from vapours oven.
I'm going to order the Twisted Messes, unless there's a different RDA with better airflow and same amount of space or more?
Is your MXV4 a clone? Haven't put my genuine one down all day, dual 6 wrap 2.5mm clapton (0.4ohm), have the 'cooling cap' on with the stock wide tip - which I've found really comfortable. Side air holes closed off, just pulling from the bottom, 75w on the RX200.
Haven't tried slurricane yet, I will tomorrow or tuesday, smells nice, quite enjoying 'EZ Does it - On Ice!' by ruthless atm.
Edit: Wonderworm is lovely, a sweet taste but its not sickly or over powering at all, will have to find a recipe for it
I packed the V4 wells with quite a healthy amount of fluffed out cotton, on about my 12th pull now and its only just starting to fade off
Last edited:
Yeah its a clone, I've used it without the extension with maximum airflow on 55J/220C with dual coil from 26g twisted kenthal 4 wraps reading at 0.2ohms. It chucks nice cloudsIs your MXV4 a clone? Haven't put my genuine one down all day, dual 6 wrap 2.5mm clapton (0.4ohm), have the 'cooling cap' on with the stock wide tip - which I've found really comfortable. Side air holes closed off, just pulling from the bottom, 75w on the RX200.
Haven't tried slurricane yet, I will tomorrow or tuesday, smells nice, quite enjoying 'EZ Does it - On Ice!' by ruthless atm.
Edit: Wonderworm is lovely, a sweet taste but its not sickly or over powering at all, will have to find a recipe for it
I've put the extension on and in the mean time cleaned the RDA a little, it needed a clean. I've used up aronud 70% of the 15ml bottle in like 3 days...
I'll re-wick it when I get new juice.
Edit: Could you post a photo of your build?
What cotton did you use?
Last edited:
Man of Honour
- Joined
- 13 Nov 2009
- Posts
- 11,635
- Location
- Northampton
Yeah its a clone, I've used it without the extension with maximum airflow on 55J/220C with dual coil from 26g twisted kenthal 4 wraps reading at 0.2ohms. It chucks nice clouds
I've put the extension on and in the mean time cleaned the RDA a little, it needed a clean. I've used up aronud 70% of the 15ml bottle in like 3 days...
I'll re-wick it when I get new juice.
Edit: Could you post a photo of your build?
Just a note, 50J/220C is your mod in Temperature control. TC doesn't work with Kanthal. You'll need straight power mode.
You'd be better off with more wraps for a higer res and giving it more power if you want bg clouds, or in fact flavour as well. Surface area is king
What wire would you recommend? How many wraps should I do and what sort of resistance are you talking about? 0.5ohms?
Thanks for the tips!
Its not as bad, as you think, after couple days you don't even think about it anymore. The vapour production out of an RDA is ridiculous though!
What about flavour? I've hear mixed result/depends what juice etc?
Man of Honour
- Joined
- 13 Nov 2009
- Posts
- 11,635
- Location
- Northampton
What wire would you recommend? How many wraps should I do and what sort of resistance are you talking about? 0.5ohms?
Thanks for the tips!
I'm dripping on a mech so I need the low resistance and sefave area so I'm running a simple 9 wrap 317L 24ga Stainless Steel which sees me around 60-65w on fresh batteries
You dont need low ohms to get flavour or clouds on a regulated mod, that just eats battery faster...
As for what you should build, that depends on what you find comfortable heat wise and what your mod and atty can handle... also what juice you are using as different PG/VG ratios and flavours can make a difference in the experience.
For starters, use Steam Engine to find your mods sweet spot and build for it, then try different power settings till you find the wattage that gives you the flavour and clouds you want.
As for what you should build, that depends on what you find comfortable heat wise and what your mod and atty can handle... also what juice you are using as different PG/VG ratios and flavours can make a difference in the experience.
For starters, use Steam Engine to find your mods sweet spot and build for it, then try different power settings till you find the wattage that gives you the flavour and clouds you want.
Last edited:
- Status